Buscar en el registro

He was checking a water pump hose for frozen spots when he tripped on a piece of frozen dirt and fell face first to the ground. He caught himself when he was falling with both hands breaking both wrists.

He was tightening bolts on a Cat D11 dozer when the wrench slipped and struck him on his wrist and fractured it.

Truck owned LJF Inc.enroute for load of coal-Bonita Job. Truck shut off going up grade, coasted truck backward to side road. Driver saw electrical smoke coming between front of battery box & rear of front tire. Wires started flaming, put out with fire extinquisher, flames kept erupting, fire out of control. Loader operator got water in his bucket dumped on fire until out.

He was moving a 1000 pound piece of steel when the cables lost tension and it fell onto his right leg. Broken lower right leg.

While operating rubber tired front end loader in rock in pit area the tooth of the loader slipped off a rock which shook the loader and he felt pain in his lower back.

Hydraulic line broke on Hitachi 1800 Shovel, employee slipped on oil and fell.

While climbing up the ladder on Cat 980C Wheel Loader, he lost his grip and footing on ladder and fell to the ground injuring his chest and leg.

He was walking from his pickup truck to the wheel loader to start work when he slipped on some ice that sloped downward. He lost his footing and rolled his ankle and then fell down on it, spraining his ankle.

EE was walking in fresh snow up a grade to the upper level where his vehicle was parked. He slipped in the snow and fell to both knees, which one leg went behind him. Swelling happened in both knees.

While hauling dirt to dump in a Cat 777D off highway truck, he ran over a rock on the road and bounced in his seat. he hit his elbow on the arm rest, causing a contusion to the elbow.

EE WAS STANDING BEHIND A CO-WORKER PUTTING TENSION ON A COME-A-LONG WHEN THE HAMMER HIS CO-WORKER WAS USING SLIPPED OUT OF HIS HANDS AND HIT HIM ON THE NOSE, CAUSING A LACERATION.

HE WAS TIGHTENING A BOLT ON A HITACHI 1800 EXCAVATOR WITH A WRENCH. WHEN HE WENT TO STAND UP HE FELT A VERY SHARP PAIN IN HIS LOWER BACK AREA. (STRAIN).

PUTTING ON AUGERS WHEN HOOK CAME UNDONE AND AUGER FELL ONTO LEFT FOOT.

HOOK FROM HYDRAULIC HOIST FLEW OFF AND HIT MOUTHBREAKING AND LOOSENING SEVERAL TEETH AND CUTTINGLIP.

WHILE GETTING INTO WATER TRUCK HE SLIPPED ON THE FUEL TANK AND FELL BACKWARDS ONTO THE GROUND CAUSING A CONTUSION TO THE HIP.

HE WAS PUSHING DIRT WITH A BULLDOZER ON ROUGH BOTTOM ROCK WHICH CAUSED PAIN IN SIDES FROM JARRING AND SHAKING FROM THE DOZER, WHICH LED TO A HERNIA.

HOOKING CABLE ONTO AUGER WHEN CABLE GOT BEHIND NEXT ROW OF AUGERS & PULLED AUGER FROM PILE ONTO HAND SMASHING BONES OF LEFT HAND.

HE WAS PICKING COAL OFF OF CONVEYER BELT AND PINCHED HAND BETWEEN ROCK AND BONEY COAL CHUTE ON TIPPLE. HE LATER FOUND HE FRACTURED A FINGER ON HIS RIGHT HAND.

HE WAS SHIFTING THE BED LEVER TO RAISE OR LOWER THE TRUCK BED. THE LEVER WAS VERY STIFF AND HARD TO MOVE, WHICH STRAINED HIS LOWER BACK AND GROIN AREA.

EMPLOYEE STATES: ON JOB SITE (BLASTING PREPARATION) HE BLACKED OUT. TAKEN TO HOSPITAL VIA AMBULANCE.

EE WAS LIFTING A TURB CHARGER THAT WAS SITTING ON THE COUNTERWEIGHT OF A RUBBER TIRED LOADER. THE CREATED A PULLING THE THE GROIN AREA WHICH CAUSED A HERNIA.

EE WAS PUTTING OIL INTO A CAT DION BULLDOZER WHEN HE LOST HIS BALANCE AND FELL OFF DOZER AND SPRAINED HIS ANKLE.

PULLING TOOLS HE STUCK HIS FINGER BETWEEN AUGER AND KELLY BAR.

EE WAS SITTING INT HE OPERATORS CAB OF A CAT 777A OFF HIGHWAY TRUCK WAITING TO GET LOADED. WHEN THE LOADER OPERATOR WAS LOADING THE TRUCK. A ROCK DROPPED ON THE SIDE OF THE BED OF THE TRUCK WH ICH JARRED THE OPERATORS CAB WHERE THE EE WAS SITTING. HE SUSTAINED A STRAIN THE UPPER BACK AREA.

HE WAS USING A CAT 980B LOADER, WHILE USING IT'S HYDRAULICS AND A CHAIN TO RESET A WATER PUMP. AFTER RESETTING THE PUMP, HE WENT TO DISCONNECT THE CHAIN WHILE STANDING ON THE TIRE OF THE PUMP. HIS FOOT SLIPPED OFF OF THE TIRE ONTO THE GROUND, FRACTURING HIS RIGHT HEEL.

OPERATOR SLIPPED ON THE WET CATWAKL OF A CATERPILLAR D9H TRACK TIE DOZER AND FELL TO THE GROUND. HE SUSTAINED A BROKEN RIB AND A SLIGHT CONCUSSION.

AUGER MACHINE OVER-HEATED AND RADIATOR CAP BLEW OFF THROWING FLUID ON HIS ARM CAUSING BURN.

WHEN STEPPING OFF A CRAWLER EXCAVATOR HE TRIPPEDON A ROCK AND FELL DOWN STRAINING HIS BACK. THISINJURY WAS NOT REPORTED WHEN OCCURRED. IT REOCCURRED AND IS NOW REPORTABLE. 1ST DAY OFF 10/11/01

REMOVING DEFECTIVE HOSE FROM RUBBER TIRES LOADER. WHEN HOSE CLAMP WAS REMOVED, THE HOSE END DROPPED AND HIT PELVIS AREA CAUSING HERNIA.

HE WAS CLIMBING DOWNT HE LADDER OF THE ROCK TRUCK AT THE END OF HIS SHIFT. HIS FOOT CAUGHT ON THE LADDER AND HE FELL BACKWARDS ONTO THE GROUND BREAKING HIS UPPER RIGHT ARM.

HE WAS GETTING DOWN FROM ADJUSTING THE HOIST BRAKE ON A 2400 LIMA DRAGLINE WHEN HIS FOOT SLIPPED. (STRAIN - LOWER BACK AREA)

HE WAS TAKING A PIECE OF PIPE OFF A 2400 LIMA DRAGLINE. HE TURNED HIS HEAD & WALKED INTO A PIECE OF FLEX PIPE THAT WAS HANGING FROM THE ROOF OF THE DRAGLINE PRODUCED A CUT ON LEFT EAR

HE WAS INSTALLING A SPRING ON THE BACK OF A TRIANGLE TRUCK. WHEN HE PICKED UP THE SPRING TO INSTALL, HE FELT SOMETHING IN HIS GROIN AREA.

WHILE HE WAS GETTING DOWN OFF OF 4600 MANITOWOC DRAGLINE, HE SLIPPED ON THE TRACK AND FELL TO THE GROUND. (CONTUSION OF LOWER LEG).

HE WAS CHEVCKING THE TURBO CHARGER ON A CAT 773 ROCK TRUCK. HE TOOK THE INTAKE PIPE OFF THE TURBO CHARGER AND THEN STARTED THE CAT 773 ROCK TRUCK. THE TURBO POSSIBLY CAME APART. (AMPUTATION TO MIDDLE OF FOURTH FINGER).

EE WAS INSTALLING BUVCKET LEVELER ON LOADER BOOM. WHILE TIGHTENING BOLT, THE WRENCH SLIPPED OFF OF BOLT AND CAUGHT HAND BETWEEN WRENCH AND BOOM OF FRONT END LOADER. (FRACTURE MIDDLE FINGER)

EE WAS LIFTING AN OIL DRUM OFF THE GROUND, AND FELT A PULL IN HIS GROIN AREA. THE EE HAS NOT MISSED ANY WORK TO DATE, BUT WILL BE OFF WORK IN THE NEAR FUTURE FOR A HERNIA OPERATION.

WHILE DRIVING TRIAXLE TRUCK HE ENTERED THICK FOG. CAME UPON VEHICLE AND APPLIED BRAKES. TRUCK PUULLED TO RIGHT AND HIT AN EMBANKMENT.

WHEN HE WAS DRIVING THE TRI-AXLE TRUCK DOWN THE ROAD, HE WENT TO SHIFT THE GEARS AND HIS BACK AND HIP TWISTED THE WRONG WAY.

EE SQUATED INTO POSITION TO LIFT THE END OF A 6X8 X10' TIMBER. AS A RESULT OF THIS LIFTING, A SHARP PAIN OCCURRED IN RIGHT HIP RADIATING DOWN INTO CALF OF THE LEG. BULGING DISC.

OPERATOR WAS EXITING REAR CAB OF DRILL WHEN THE HEEL OF HIS BOOT GOT CAUGHT. OPERATOR STRAINED HIS SHOULDER AS HE GRABBED FOR THE DOOR HANDLE.

EE WAS WORKING ON THE FRONT OF A TRUCK TRYING TO REMOVE A KING PIN. A PIECE OF METAL BROKE OFF THE KING PIN WHEN HE STRUCK IT WITH A HAMMER AND STRUCK HIS LOWER LIP LODGING THERE.

INSTALLING A TRIP CABLE ON A 2400 LIMA DRAGLINE ANS WAS POUNDING ON A METAL WEDGE WITH A 20 LB SLEDGE HAMMER. AS HE WAS POUNDING ON THE WEDGE A PIECE OF METAL FLEW OFF OF THE SLEDGE HAMMER AND EMBEDDED IN HIS RIGHT LEG.

EMPLOYEE WAS LIFTING A BUCKET TOOTH & SHANK ONTOTHE SOCKET OF THE DRAGLINE BUCKET WHICH WAS LYING ON ITS SIDE WHEN HE EXPERIENCED A HERNIA IN IN THE GROIN AREA.

OPERATOR WAS CLIMBING LADDER OF ROCK TRUCK AT THE BEGINNING OF THE SHIFT WHEN HE SLIPPED, FOST FOOTING, & HELD ON WITH ONE HAND. THE SUDDEN JERK & STRETCHING RESULTED IN THE OPERATOR RECEIVING A RUPTURE TO THE LOWER ABDOMEN.

STANDING IN FRONT OF AUGER MACHINE. ROCK FROM HIGHWALL FELL ON ROOF OF AUGER MACHINE AND ROLLE DOFF ONTO HIM, STRIKIGN HIM ON HIS HARD HAT.

HE WAS CHANGING THE DRILL BIT AND HAD REMOVED THE OLD BIT. HE ATTEMPTED TO PULL OUT THE BUSHING HOLDER WHEN THE FEED DROPPED IN AND CAUGHT HIS FINGER BETWEEN THE BUSHING HOLDER AND THE TABLE O N THE DRILL.

WHILE WIRING A SHOT, THE EMPLOYEE TRIPPED AND FELL ON HIS LEFT WRIST.

INSTALLING BELLY PAN ON 355 KOMATSU WHEN SLING SLIPPED ALLOWING BELLY PAN TO FALL ON EE'S LEG.

EE STEPPED ONTO LADDER, SLIPPED AND FELL BACKWARDS, INJURING HIS LEFT FOOT. EE SPRAINED HIS ANKLE AND FRACTURED HIS LEFT HEEL.