Buscar en el registro

While getting off dozer, stepped onto the ground but an unseen stump caused EE to slip and fall and bump left leg.

Driver was backed up to lime pile to dump. As the bed started up, one side stuck and caused the unit to go on its side. Driver got out through windshield. Was transported to hospital but was released. His side is sore.

While carrying antifreeze to his 95Z Kawaski loader, he slipped on a patch of ice and fell on his left shoulder, twisting his back.

Scrapping loose rock from highwall with front-end loader. The bucket slipped off a rock, hit another rock and slammed employee back into the seat causing the injury.

While getting off the dozer he slipped on step and twisted his lower back.

While changing a hose on the dozer, the bolt broke loose, causing him to hit his left elbow on the dozer hood.

While using a cutting torch he burnt his left hand.

While shoveling wet fly ash out of the bed of the truck, ee twisted the wrong way and pulled his back out.

Slipped and fell on snow covered ice as he was working on coal crusher and bumped his head and right elbow.

While getting out of the excavator, he slipped on the ice falling on his left leg and hitting his knee on the ice.

While repairing/replacing tilt cylinder on D-11 Cat dozer the strap slipped and the cylinder dropped smashing his left thumb.

Left leg slipped out from under employee as he walked over loose spoil material at job site.

While unloading an idler from the bed of Ford F-350 pick up truck the load shifted cutting his right thumb, resulting in stitches.

Trama or impact from operating machines over approx 29 years, causing Necrosis (loss of blood flow).

Walking on snow covered area, he slipped on an ice patch, as he tried to catch himself, he dislocated his ring finger on his right hand.

He slipped while exiting the loader and fell to the ground, hurting his upper back on his left side.

EE was operating the dozer when it caught fire. He tried to put out the fire with the fire extinguisher that was in the dozer. He breathed in smoke and dust from the extinguisher. He went to the hospital for x-ray as a precaution.

While lifting discharge hose he strained his lower back.

While lifting a concrete barrier with crane the injured reported that he may have hit the wrong control then over-corrected resulting in his right hand being crushed.

While traveling to work in company truck along Rt. 153 near Penfield the vehicle hydroplaned on substance (mud/water/oil) on road resulting in the truck flipping over.

While lifting a piece of steel his right knee popped.

While shutting the tailgate on company dump truck he shut his finger in the tailgate.

HE WAS CHANGING HOSES ON A BULLDOZER. WHILE GETTING OFF THE BULLDOZER, HE SLIPPED AND FELL TO THE GROUND.

HE WAS MOVING PARTS FROM MECHANIC TRUCK TO DOZER

PUNCTURED LEFT SIDE OF FACE WHILE PULLING PUNCH THAT WAS STUCK IN SIDE OF TRUCK

Fell off the rock truck while changing air filters.

HE SLIPPED OFF BACK BUMPER OF MECHANIC'S TRUCK WHILE REMOVING MATERIALS. HE LANDED FLAT ON BOTH FEET AND PAIN SHOT DOWN BOTH LEGS.

EE WAS CHANGING DRILL BIT ON RIG WITH WRENCH WHEN WRENCH FLEW BACK AND HIT HIM ON THE RIGHT WRIST.

EE WAS GETTING OFF FRONT END LOADER & EITHER SLIPPED OR PARTLY MISSED THE STEP. THE COAL SURFACE WAS DAMP. EE FELL & SPRAINED HIS BACK.

EE WAS WALKING IN PIT & DECIDED TO ROLL A LUMP OF COAL OFF THE 3' HIGH EDGE OF THE MINED AREA. IT ROLLED AGAINST HIS ANKLE CAUSING SOME DISCOMFORT IMMEDIATELY. EE TRIED TO WORK BUT ENDED UP MISSING TIME DURING THE COURSE OF THE NEXT MONTH DUE TO SWELLING.

EMPLOYEE WAS CHANGING A DRILL BIT AND LACERATED HIS LEFT INDEX AND MIDDLE FINGER.

EE STEPPED OUT ONTO LEFT FRONT FENDER OF CAT 992C LOADER WHICH HAS A FLAT WALK AREA. AREA WAS DRY, NO GREASE OR LOOSE DIRT WAS PRESENT. AS HE WAS RETURNING TO CAB, HE SIMPLY MISPLACED OR MISJU DGED HIS STEP AND FELL TO THE GROUND.

WHIOLE WALKING UP EMBANKMENT TO PULL WINCH CABLE, EMPLOYEE SLIPPED AND FELL CAUSING INJURY TO HIS LOWER BACK.

WHILE EE WAS KNEELING ON TRACK REPLACING WATER PUMP, HIS RIGHT KNEE ROLLED ONTO PAD BOLT.

WHILE EE WAS USING A CUTTING TORCH TO REMOVE A PIN FROM DOZER BLADE PUSH ARM, SPARK FLEW INTO RIGHT EAR.

WHILE EE WAS WALKING TO ROCK TRUCK, HE SLIPPED ON ICE AND FELL TO GROUND CAUSING INJURY TO RIGHT LOWER BACK AND HIP.

WHILE EE WAS BRUSHING CORROSION OFF BATTERY TERMINAL OF FIAT 945, PARTICLE OF CORRISION FLEWINOT HIS LEFT EYE CAUSING IRRITATION

SLIPPED WHILE CLIMBING ON SCRAPER TO CHANGE OIL, INJURING HIS LEFT KNEE.

WHILE WALKING TO SERVICE TRUCK, EMPLOYEE SLIPPED ON A ROCK AND TWISTED RIGHT KNEE.

WHILE MAKING REPAIRS UDNER COAL TRUCK, RUST FELL OFF THE BOTTO OF THE HYDRAULIC TANK FALLING INTO THE LEFT EYE AND CAUSING AN IRRATATION.

WHILE ASSISTING MECHANIC FIND AN OIL LEAK AT THEFRONT END OF THE DOZER, THE EE WAS CLIMBING UP TO GET IN THE DOZER TO START IT. HIS FOOT SLIPPEDCAUSING HIM TO FALL AND HIT HIS BACK ON THE PITC H BRACE.

WHILE WORKING ON THE DIFFERENTIAL OF THE FORD TRUCK, A PIECE OF DIRT FLEW IN HIS RIGHT EYE.

WHILE STEPPING DOWN FROM THE DOZER TRACK TO THE PUSH ARM, THE EMPLOYEE'S FOOT SLIPPED ON THE MUDDY PUSH ARM AND HE FELL AGAINST THE TRACK CAUSING A BRUISE WITH SWELLING, MIDPOINT, TO EMPLOYEE' S LEFT FOREARM.

WHILE WORKING ON BULLDOZER, EE DROPPED AIR GUN ON TOP OF LEFT BEHIND STEEL TOE OF SHOE CAUSING BRUISED FOOT.

WHILE INSTALLING A HOSE ON A D9H CATERPILLAR BULLDOZER, WRENCH SLIPPED CAUSING HAD TO SLIP AND HIT ANOTHER HOSE SPRAINING THE RIGHT WRIST.

WHILE HOLDING TRACK PIN IN PLACE TO BE INSTALLEDBY A TRACK PRESS ON D9L CATERPILLAR BULLDOZER, PIN JUMPED AND JAMMED RIGHT HAND, WRIST AND ELBOW.

WHILE STEPPING DOWN OFF SERVICE TRUCK, EMPLOYEE'S FOOT SLIPPED AND LEFT ANKLE TWISTED WITH IMPACT WITH GROUND.

WHILE HELPING MECHANIC DO SERVICE WORK ON 637 CAT SCRAPER, EMPLOYEE SLIPPED AND CUT AND BRUISED SHIN ON LEFT LEG. RAINY WEATHER CONTRIBUTED TO SLIPPERY CONDITIONS.

WHILE LIFTING CYLINDER HEADS & TWISTING ON UNEVEN GROUND TO HAND THEM TO A CO-WORKER HE TWISTED LEFT KNEE

WHILE REPAIRIGN DOZER, HE BUMPED HIS KNEE CAP.