Buscar en el registro

Setting water pump and hurt back.

Cleaning scraper and stacker belt off, shovel got caught between scraper and belt line.

Was cutting small trees, slipped and cut himself with saw.

Riding into work face. When they came to low top, he didn't get down into mantrip like he should have. Hard hat got into roof, hurting forehead and back of his head.

Cutting tape with a belt knife, it slipped and cut his left upper leg.

Bolter pot came down on right leg.

Rider seam came closer to the mining seam.

Area is in old works.

Draw rock fell hitting him in neck and back. He was in the return. Please note *Returned to work same evening and finished shift.

Bolting top and drawrock fell hitting his hand.

Between #1 entry into 2 left. Hill seam dropped out.

The fall is located 20' inby survey station #218 in the #3 entry 4 crosscuts outby the section loading point of the 001 MMU. The fall is approx 120' wide X 20' wide X 4'-5' in thickness.

Roof fall - 14 breaks inside at #6 entry #2 intake seal.

Fire started in cab of loader. No one around it.

Underground intersection at break 13 above #4 head drive about 3 1/2 ft. high, about 19 ft. wide, approx. 50 ft. long.

Roof fall occurred starting 1800 ft inby no. 2 portal on the 1st belt line, Ranging 4 to 6 ft highh approx 14 ft wide and 30 to 40 ft long in between the blocks of break 17 and 18.

Roof fall occurred starting 1,200' inby #3 portal on the intake entry. The fall was approx 20' wide X 150-200' long X 10-20' high in between the coal block and through 2 intersections.

Turning into #3 entry from #2 cut too close, caught arm between rib & buggie.

Changing a foot shaft and twisted knee.

Backing up mantrip to pick up employees - ran into water tank bursting it then ricocheting into pump house causing injury to right pinky finger.

Peice of draw rock fell hitting left side of head, left shoulder and back.

Bent over to get dust box sealed, drawrock fell hitting him in the lower back.

A non-injury foof fall has occurred in the intersection measuring about 18 foot wide and 22 foot in length from 2 to 7 foot in height.

Pulled shuttle car up behind miner loading coal. a rock came over sideboards hitting him in nose and right arm.

Roof fall occurred starting 1,200 ft inby #2 portal belt entry. The fall was approx 20 ft wide, 40 ft long, 7 ft high in between the coal blocks.

Glove caught on steel and twisted mashing hand in top.

Cutting belt for skirt on tail piece, box knife slipped cutting left thumb.

Repairing battery on rubber tired man trip, battery blew up and struck him in the eye.

WORKING ON MINER, SITTING AROUND ON GROUND USING LEGS TO PUT CAP ON. DRAW ROCK FELL FROM BETWEEN BOLTS & STRUCK HIM BETWEEN HIS SHOULDER BLADES BELOW NAP OF NECK.

EE WAS AT THE POWER BOX WHEN A ROCK FELL FROM THE TOP, HITTING HIM ON THE ARM (LACERATION TO LEFT FOREARM).

Cutting open a box of glue-box cutter slipped cutting r-thumb.

EE WAS CUTTING A PIECE OF SKIRT RUBBER. KNIFE SLIPPED AND CUT HIS KNEE. (NO STITCHES; KNEE BRACE & CRUTCHES.)

Cutting belt in preparation to make belt splice hand slipped and utility knife struck him on wrist.

Making a splice in cable cut left leg.

Shoveling and got a pain in left shoulder.

Working on miner-hit right thumb with hammer mashing it.

Shoveling belt, turned and felt pain in lower back.

ON THE ROOF BOLTER, EMPLOYEE SWUNG POT OUT ON BOLTER HITTING HIS RT. KNEE.

PUTTING BELT IN FOR BELT MOVE, CABLE CAUGHT IN SHEAVE, WHEEL CAUGHT BAR AS HE HELD ROPE, ROPE STRUCK HIM IN THE STOMACH.

Cleaning up belt line with scoop, got too close to rib rock rolled out and hit him.

A piece of sandstone rock fell hitting him on his hard hat.

SERVICING THE MINER WHEN DRAWROCK FELL HITTING EE ON THE EAR

SPOTTING UP A MATCH FOR THE NEXT ROW OF BOLTS WHEN A ROCK FELL OUT FROM THE RIB & BOLTS, AT LEAST FOUR ROWS OF BOLTS FROM THE FACE.

3RD LEFT MAIN FALL IN #3 FACE ABOUT 40'L, 6'HIGH, 20' WIDE FALL ON RETURN ON #3 BELT IN #1 ENTRY ON LEFT 5'HIGH, 10' WIDE 45'LONG SPAD NO 491.

Cutting a hole in hydraulic oil can, poured oil in bolter, went to throw can and cut left hand.

FOUR ROOF FALLS HAVE OCCURED AT R DIFFERENT LOCATIONS ON THE 001-DMMU. THE ROOF FALLS ARE ABOVE THE ROOF BOLT ANCHORAGE ZONE. THE ROOF FALLS ARE APPROX 20' X 30' X 6' HIGH. THE ROOF FALLS IN THE #3 ENTRY IS IN THE INTERSECTION, THE FALL IN #5 ENTRY IS IN INTERSECTION. THE FALL IN #6 AND #7 ENTRIES ARE IN THE MAIN ENTRY

Making a splice, when he cut cable, knife slipped cutting his left hand.

He said several things: A belt clamp came loose, hitting him in the nose, he jerked backwards and hurt his back. He was lifting on a feeder motor and hurt his back. Then wrecked a mantrip and hurt his back.

Cleaning dust box, piece of draw rock fell hitting on right arm and right side. It scraped him.

Stepped off roof bolter into hole and twisted leg.