Buscar en el registro

Standing at the back of the miner machine the EE started the miner raised the ripper head and the machine tilted, then the back bumper sat down on the left toe of boot and broke three toes.

Trammed miner against himself, pinning against rib.

Riding in scoop bucket hurt chest and shoulder area.

EE PLACED THE S & S SCOOP LOADED WITH ROOF BOLTS CLOSE TO HIS ROOF BOLTER AND WAS STANDING BETWEEN THE SCOOP AND BOLTER.

PULLING A BOX OF RESIN ACROSS THE TOP OF A FLETCHER DOUBLE HEAD ROOF BOLTER IN LOW HEIGHT.

HE WAS HELPING TO HANG A CABLE TO A ROOF BOLT PLATE AND DISLODGED A PIECE OF ROCK FROM THE ROOFBOLT AND COAL RIB.

EMPLOYEE AS HOOKING METAL CABLE TO A TREE TO PULL THE TREE DOWN A SLOPE AND CUT HIS FINGER ON A LOOSE STRAND OF CABLE, REQUIRING STITCHES.

THE OPERATOR OF A SHUTTLE CAR REACHED HIS LEFT HAND OUT TO HOLD UP A CABLE AS HIS CAR WENT AROUND A CORNER AND HE STRUCK THE CAR FRAME WITH THE BACK OF HIS LEFT HAND.

TRYING TO LINE A STAB JACK UP ON JOY MINER TO BEABLE TO WELD ON IT AND IT SLID OFF CRIB BLOCK ONTO SHOULDER

EE WAS OPERATING HIS SHUTTLE CAR WHEN A PIECE OF ROCK FELL & STRUCK HIS HARD HAT/SHOULDER & FOREARM

IT APPEARED TO BE A FAULT IN THE ROOF KNOWA AS A HORSEBACK IT APPEARED SLICK AND SHINED ON TOP AND SIDES.

LAMINATED ROOF HAD A COAL SEAM ABOVE ANCHOR POINT OF RESIN BOLTS, LOCATED ABOUT 25 CROSS CUTS OUTBY FACE AREA.

SLIPPED ON TRACK WHILE UNLOADING 6" BRATTICE BLOCKS AND FELL. HE STRUCK HIS LOWER BACK LEFT HIP ON THE TRACK.

BUMPED LEFT KNEE CAP ON ENTRANCE TO MANTRIP CAR NO DEFECT IN CAR.

THE INDIVIDUAL WAS HELPING TO REPLACE A HYDRAULIC HOSE ON HIS ROOF BOLTER MACHINE. A PIECE OF SLATE TYPE ROCK FELL FROM OVER HEAD CAUSING HIM TO DODGE HIS HEAD SIDEWAYS AND HE STRUCK THE CORN ER OF A SIDE LIGHT ONT HE MACHINE WITH HIS RIGHT CHEECK OF HIS FACE. RESUTLING IN A CUT APPROX 1/2 INCH LONG.

ICE AND SNOW COVERED STEPPED.

ABNORMAL FAULT IN ROOF LAYERED LAMINATED SLATE & ROCK DISLODGED FROM TOP & FELL

HANDLE ON THE STEERING WHEEL OF A 3 WHEEL PERSONNEL CARRIER STRUCK HIS RIGHT HAND. PROBABLE BROKEN BONES.

CRAWLING IN LOW COAL WITHOUT HIS KNEE PADS.

SANDY SHELL TOP STARTED WORKING & HAD TO QUIT SECTION FOR REJECT PUROPSES OVER A MONTH AGO. NOTICE FALL ON THE WEEKLY INSPECTIONS OF RETURN.

USING A POCKET KNIFE TO OPEN THE LID TO A BUCKET OF MINER BITS. HE CUT THROUGHT THE LID & CUT HIS LEFT INDEX FINGER.

BLET JACK BROKE PC SWUNG ON JACK CAUGHT INJ PUSHED IN SCOOP

PUSHING ON RED DEVIL WITH FOOT HURT KNEE

GETTING UP FROM SITTING POSITION TO CRAWLING POSITION CAUSING HIS KNEE TO HURT.THIS INFORMATOIOP NOON OF 04-17-92.

PREPARING TO INSTALL ROOF SUPPORT DRAWROCK FELL STRIKING ON BACK

REMVOING ROCK FROM DUMPING PAOIN OF BELT LINE AND A PIECE OF RAOCK CAUGHT AND CUT HIS RIGHT HAND AND FINGERS.

MOVING LOOSE ROCK AWY FROM BELT LINE AND DROPPED A PIECE AGAINST HIS LEFT HAND, CUTTING HIS RING FINGER.

WHILE HELPING TO ERECT A METAL CANOPY OVER THE BELT PRTAL, HE BUMPED HIS BACK AGAINST ONE SIDE OF THE CANOPY AND RECEIVED BRUISES AND SCRATCHES ON THE LOWER BACK AND SHOULDER.

I.NAME THE MINE9 MACHINE OP WAS INSTALLING CUTTING BITS ON THE MINER WHEN A PIECE OF SLATE FELL FROM BETWEEN THE ROOF BOLTS & STRUCK HIM ON HIS SHOULDER & UPPER BACK. HE COMPLAINED OF PAIN IN HIS SHOULDE9 & DECIDED TO GOT TOT HE HOSPITAL FOR X-RAYS.

WHILE IN THE PR2CESS OF DISLODGING A PIEE OF ROCK FROM THE FEEDER CONVEYOR THE WORKER SLIPPED AND SAID HE STRAINED HIS BACK.

WHILE IN THE P9OCESS OF MINING THROUGH A ROCK ROLL I NAME ROOF BOLTER OPERATOR WAS BOLTING TOP IN THE #3 HEADING WHEN DRILL DISLODGED A PIECE OF ROCK MEASURING 9X11X2 TO A FEATHERED EDGE, S STRUCK HIM ON L9FT SHOULDER AND NECK CAUSING MUSCLE STRAIN OF THE NECK AND SOME SMALL SCRATCHES