Buscar en el registro

WHILE IN THE PROCESS OF HANGING PLASTIC 3" WATER LINE, HE INJURED HIS LEFT THIGH.

VICTIM WAS REMOVING BROKEN TORQUE SHAFT. REMOVED CAP THAT HOLDS TORQUE SHAFT IN PLACE. HOT COAL SHOT OUT AND STRUCK VICTIM IN CHIN AND NECK AREA.

AS HE WAS INSTALLING A BOOM JACK HIS LEFT INDEX FINGER AND THUMB WAS PINCHED BETWEEN THE JACK AND THE BOOM ON THE CONTINUOUS MINING MACHINE.

AS EE WAS LEAVING THE SECTION (AT END OF SHIFT) HE FELL WHILE CROSSING THE BELT AND INJURED HIS RIB CAGE AREA.

EE STEPED ON HALF HEADER AND TURNED HIS ANKLE.

HE WAS USING A RATCHET TOOL, IT SLIPPED OFF THE NUT , WHICH LED TO HIM INJURING HIS LEFT HAND.

AS EE WAS LOOSENING THE LOCK VALVE HYDRAULIC PRESSURE BLEW OUT CATCHING HIS HAND BETWEEN THE RATCHET AND THE MINER.

AFTER HAVING LOADED HIS SCHUTTLE CAR; EE HAD STARTED TOWARD THE FEEDER WHEN HE RAN INTO A TIMBER, HE WAS CAUGHT BETWEEN THE NILL-POKED TIMBER AND THE OPERATORS COMPARTMENT OF THE SHUTTLE CAR.

AS EE WAS DRILLING A HOLE INTO THE TOP, A PIECE OF SLATE DISLODGED AND STRUCK HIM ON HIS RIGHT FOOT, JUST ABOVE THE METAL TARSAL PROTECTOR OF HIS BOOT.

WHILE HE WAS REMOVING A CRIB WHICH WAS SET ALONG THE MAIN ROADWAY, A CRIB FELL AND STRUCK HIM ON THE RIGHT FOOT.

AS HE WAS PULLING THE ROPES TIGHT ON #4 BELT LINE USING A SET OF COME-ALONGS, HE HURT HIS BACK WHILE EXERTING HIS STRENGTH.

AS INJURED WAS LIFTING A CRIB BLOCK HIGH OVER HIS HEAD HE INJURED HIS LOWER BACK REGION.

INJURED WAS GOING THROUGH A MANDOOR, HE SLIPPED AND FELL WITH THE FULL IMPACT ON HIS RIGHT KNEE.

WHILE INJURED WAS SUPPLYING THE BOLTER AND AS THE BOLTER MOVED FORWARD A TIRE RAN OVER HIS LEFT FOOT.

THE EMPLOYEE HAD JUST SET THE INISIDE BOLT OF THE FOURTH ROW, AFTER HE PUSHED THE BOLT UP TIGHT; TO SET IT, HE LEFT THE CONTROLS AND WALKED OUT FROM UNDER THE CANOPY TO MARK THE FIFTH ROW OUTS IDE BOLT. THIS AREA IS UNSUPPORTED TOP.

PUTTING UP ROOF BOLTS BACK STRUCK HIM ON BACK HIP AND ANLKE

SETTING TIMBERS ROCK FEL STRUCK ON BACK

WHILE LIFTING MINER SHIELDS BACK UP INTO POSITION ON THE MINER RHINE CLAIMS TO HAVE INJURED HIS BACK.

AS WORKER WAS LIFTING ON MINER CABLE HE INJ BACK.

THE MAN WAS UNPLUGGING THE CAT-HEAD TO THE 3-WHEELER CHARGER BUT FORGOT TO KNOCK THE BREAKER FIRST HE SUFFERED A BURN TO HIS HAND

USING JACK PUSHED HANDLE DOWN THE BAR CAME UP HIT IN MOUTH

UNINTENTIONAL ROOF FALL FACE NO. 3 OLD MAINS SECTION 20X20X5 AT SPAD NO. 71. NO MEN, MACHINES OR VENT AFFECTED. WILL NOT CLEAN UP.

UNINTENTIONAL ROOF FALL IN NO 2 FACE OF OLD MAINS SECTION 20X30X6 1/2 AT SPAD NO 72. NO MEN MACHINES OR VENT AFFECTED. WILL NO BE CLEANED UP.

THE WORKER DOES NOT KNOW HOW OR WHEN HE INJURED HIS EYE.A C0-WORKER MENTIONED TO INJURED THAT HIS EYE LOOKED RED.UP UNTIL THAT TIME INJURED WAS UNAWARE OF ANY PAIN OR DISCOMFORT AROUND HIS EYE .

AT THE VICTIM ATTEMPTED TO BEGIN DRILLING A HOLE FOR A PIN A PIECE OF SLATE FELL STRIKING HIS ARM

WHILE INSTALLING A ROOF BOLT THE VICTIMS HEAD WAS PINNED BETWEEN THE DRILL CANOPY & BOOM ON ROOF BOLTER RESULTING IN AN INJURED JAW BONE

RIGHT HAND CAUGHT IN MOVING PART OF THE ROOF BOLTER HEAD.

EE REPORTED THE INJURY 4-22-91. HE STATED WHILE THROWING ROCK DUST HIS WRIST BEGAN HURTING. THE PAIN IN HIS WRIST WAS GETTING WORSE AND AFTER WORKING HIS SHIFT, HE WENT TO THE DR. HIS WRIST WA S SPRAINED.

WHILE PULLING ON A CABLE THE VICTIM LOST HIS FOOTING & FELL ON HIS HAND

WHILE VICTIM WAS ATTEMPTING TO REMOVE A STUCK J-BOLT FROM A PIECE OF STRUCTURE WITH A CRESENT WSRENCH HE STRAINED HIS BACK

WHILE PREPARING TO INTALL A ROOF BOLT, A PIECE OF ROCK FELL, PINNING VICTIMS HAND BETWEEN SAID ROCK AND PINNER HEAD.

AS VICTIM WAS REMOVING A WATER-LINE FILTER TO CHECK FOR LOW WATER PRESSURE IN LINE; THE FILTER HOUSING BLEW OFF WITH FORCE AND STRUCK THE VICTIM IN THE FACE AREA RESULTING IN A BROKEN NOSE AND BROKEN CHEEK.

1ST FALL WAS ONE X-CUT INBY SPAD #656 IN LEFT PICK-UP ENTRY- O-48" THICK, 18' WIDE, 25' LONG. WAS 85' OUTBY FACE IN #1 ENTRY. 2ND FALL WAS ONE X-CUT OUTBY SPAD #654 IN X-CUT BETWEEN #3 & #4 EN RIES. 0-48" THICK X 18' WIDE X 75' LONG AND WAS APPROX. 225' FROM FACE AREA.

FALL LOCATED INTERSECTION 1-X-CUT INBY SPAD 640 AND WAS 20'LONG X 20'WIDE X 8'THICK.

CLEANING ON BELT LINE & HURT BACK.

ROOF FALL WAS ONE XCUT OUTBY SPAD #652 IN BLET ENTRY APPROX 150' FROM FACE . FALL MEASURED 0-48" THICK 11' WIDE & 75' LONG. FALL HAPPENED ON IDLE SHIFT & WAS FOUND BY FIREBOS.

PULLING ON HANDLE OF COME-A-LONG, HANDLE SLIPPED, HIT LEFT EAR.

INSTALLING RF BOLTS, CAUGHT HAND BETWEEN RF AND DRILL POT OF MACHINE

MOVING MINER CABLE AND PULLED MUSCLE IN CHEST AND SHOULDER.

EMPLOYEE WAS MOVING MINER CABLE AND PULLED MUSCLE IN BACK.

ROOF FALL WAS APPROX. 20' X 25' X 4'. OCCURRED BETWEEN 12:00 MIDNIGHT AND 6:00 AM. AT INTERSECTION OF SPAD NO. 159 IN THE NO. 2 ENTRY.

LOACATION THE ROOF FALL WAS X-CUT INBY ABOVE SPAD #78 IN X-CUT BETWEEN #4 AND #5 ENTRY. FALL WAS APPROX. 4 FEET THICK, 20 FEET WIDE, 25 FEET LONG.

ROOF FALL FELL ABOVE 4' RESIN BOLT ANCHORAGE.

ROOF FALL IN #2 ENTRY 7 X-CUTS OUTBY FACE AREA.ROOF FALL 20'LONG X 14'WIDE X 6-10'THICK.

WAS PUTTING BREAKER IN AND THERE WAS A FLASH FROM THE BREAKER \AND HIS ARM WAS BURNED

CUTTING MACHINE OPERATOR WAS TIGHTENING BITS ON CUTTER BAR & STRAINED BACK.

LOCATION OF ROOF FALL AT INTERSECTION SPAD 33 IN NO.4 ENTRY.3-4'THICK X 20'LONG X 20'WIDE.

20' X 30' ROOF FALL OCCURRED.FALL WAS 20'WIDE X 30'LONG X 5-6' THICK.LOCATION WAS SPAD #23 IN #1 ENTRY.

20' X 30'. ROOF FALL OCCURRED PRIOR TO 6 AM ON 2-6-89. THE FALL WAS 20' WIDE, 30' LONG AND 4-7' THICK IN THE INTERSECTION 40' INBY SPAD NO. 22 IN NO. 2 ENTRY OF THE 001-0 MAINS SECTION.

EMPL WAS ALIGNING BELT LINE RAISED UP BELT STAND TO LEVEL BELT PULL MUSCLE IN BACK.