Buscar en el registro

The employee was moving toward the roof bolter when his knees buckled causing a sprain/strain of lower lumbar region.

The fall occured in return inby section in number 6 entry. It was a horse back that was above anchorage. 6'x4' bolts used, glue 5/8' full grouted. No roadway or airway affected. Timbered off.

Employee was loading supplies, bent over and picked up some half headers injuring lower back.

Employee was helping miner man move miner. While pulling cable, the employee bent over to grab a pull rope. Resting his right hand on top of the miner, the miner began to tram causing the employee's right hand to be pinned against the top.

Employee was operating the Mac 8 mantrip when it stopped tramming. When he was checking the batteries one of the battery covers popped off & got battery acid in his eyes.

Closed tool box lid on his left hand.

Employee was hanging curtain standing on an oil can. It tipped over causing him to strain/pull a muscle in his back.

Employee strained lower back while lifting a roll of welding cable.

Pulling cable off of reel and stained lower lumbar region.

Running shuttle car toward face, hit hole and strained his back.

Employee stumbled against a pallet of rockdust injuring his tailbone area.

Employee was sitting in mantrip when the brakes malfunctioned and smashed employee's finger between the seat and batteries.

Manbus was leaving the surface when the brakes malfunctioned and the box containing the SCSRS fell striking employee in the right arm.

Employee was putting the uni-hauler on charge when a piece of rock fell and struck him in the head and back of neck.

CHANGING BITS ON MINER & STRUCK FINGER WITH HAMMER.

Put scoop on charge and the scoop rolled over the employee's foot.

In the #6 entry in the face, Employee was pulling on or pull rope attached to the miner cable, straining back.

The roof fall was 15' wide, 40' long and 6' thick. It was bolted with 4' fully grouted resin bolts. This fall is 1 break inby spad #1242 in #6 entry. This fall has been timbered off and will not be cleaned up. The fall is 4000' from the working section.

SLATE TOP 4' BLUE BOLTS. FALL INTERSECTION WILL NOT CLEAN UP, TIMBER FALL OFF. 1 BREAK OUTBY #4 WEST BELT HEAD IN INTAKE

Hanging miner cable; pulled muscle in back.

EMPLOYEE WAS MAKING UP A BOLT FOR THE NEXT HOLE NEAR THE CENTER OF THE ROOF BOLTER WHEN A PIECE OF ROCK FELL FROM BETWEEN ROOF BOLTS & HIT HIM ON THE HEAD, RIGHT SHOULDER & RIGHT LEG.

THIS FALL FELL IN INTERSECTION 12 BRK. OUTBY SECTION. AT SPAD # 1388, #6 ENTRY, WEST SECTION. TIMBER OFF, WE ARE NOT GOING TO CLEAN UP. APPROX. 4'THICK X 20'WIDE X 20'LONG. 4'RESIN WAS USED.

Employee was operating a Mac-8 mantrip when he lost the wheel and it slipped from his hand injuring his wrist.

The ee was cutting a piece of his knee pad when he cut his thumb requiring stitches.

UNLOADING ROOF BOLTS OFF BOLTER. OFF-LOADING ROOF BOLTS - LEG GOT CAUGHT IN MATERIAL, TWISTING RIGHT KNEE.

Fall in the no. 4 entry sometime between Jan. 20 & Jan. 21, 2005. The main power was off and all the men were knocked off. Fall approximately 60' long, 5' high. Bolted with 4' glue bolts; grade 60; 19' wide. Single crack on left rib, slate top. Miner was in #4 when power knocked. Rock on the miner and the retriever was used to pull miner out Saturday.

A piece of rock fell striking the employee's right hand.

Shoveling belt 3 head & 2b belt. Employee hurt back picking up rocks and putting them in the breakthrough.

HE WAS MAKING A BELT SPLICE AND CUT HIS RIGHT THUMB.

Employee was working on a piece of equipment when wrench slipped and ee struck his right hand causing a knot to surface.

PIECE OF RUB RAIL FROM CONTINUOUS MINER STRUCK EMPLOYEE IN FOOT.

Piece of rock fell and hit employee on shoulder.

MOVING MINER CABLE; HANGING CABLE AGAINST RIB.

HANGING LINE CURTAIN, FELL FROM LADDER INJURING LOWER BACK.

CHANGING CONVEYOR MOTOR WITH SLATE BAR & MOTOR SLIPPED DOWN PINCHING THUMB AGAINST THE FRAME WHICH ALSO CAUSED HIM TO PULL A LOWER BACK MUSCLE.

LIFTING ON MINER CABLE, PULLED LOWER BACK MUSCLE.

USING SLEDGE HAMMER TO HELP REPLACE TORQUE SHAFT.

PIECE OF ROCK FELL BETWEEN BOLTS INJURING EE'S LEG.

Piece of rock fell from top hitting employee's hand.

Driver Said truck jumped out of grear going down bottom steep truck would not stop. asked about braces owner said they had put new brakes on recently.

LAPPING BELT ONTO SCOOP; SLIPPED & FELL OFF SCOOP BUCKET FRACTURING HIS ARM.

Strain tendonitis in left elbow.

Rock fell from roof 12' high, struck ee in head and shoulder forcing him to the ground, he has cuts on his face and forehead and complaining about shoulder hurting.

WHILE CLIMBING ON LOADER, THE EE SLIPPED ON OIL SPOT, HIT HIS HEAD & FELL TO THE GROUND ON HIS RT. SIDE. THERE WAS KNOT ON THE RT. EYEBROW, HE ALSO COMPLAINED ABOUT HIS RT. SHOULDER & ARM.

OFFICER GOT OUT OF HIS VEHICLE TO RELEAVE HIMSELF. FEET SLIPPED ON ICE/SNOW COVERED ROAD & HE FELL. HE INJURED HIS HIP WHEN HE FELL.

Rub rail off side fell off side of miner on right foot.

OVERTURNED FRONT END LOADER; JUMPING OFF THE SIDE OF IT.

INJURY WAS COMP DOWN STEP OFF LOADER AND SLIP AND HIT ON HIS BACK.

GETTING ROOF BOLT TO BE PUT IN TOP.

WAS LIFTING A BOX OF RESIN TO PUT ON ROOF BOLT MACH.