Buscar en el registro

Employee slipped & lost his footing; fell at same level.

Employee was standing on excavator steps while fueling excavator. One foot slipped from excavator step; employee pitched forward and stopped fall with one hand by placing same on excavator deck. The impact stress of stopping his fall resulted in rotator cuff injury.

Employees were fabricating stacker/ conveyer sections. EE was uncoupling attachment from stacker eye. EE slipped.

EE climbed on top of truck to assist with placement of pipe in dump bed. Wind speed was around 14 mph. Surface not intended working surface. He fell off truck.

CUTTING PLASTIC TIES FROM GREASE LINE TO RELOCATE IT. USING POCKET KNIFE BECAUSE OF THE POSITIONOF HIS LEFT ARM,KNIFE CAME IN CONTACT WITH HIS ARM CAUSING A LACERATION

CHANGING BOLTS IN ROCKBOX OVER JAW. HOOKED UP THE OVERHEAD HOIST TO ROCKBOX ON ORDER TO LINE UP BOLT HOLES. THE HOIST WAS HOOKED UP INPROPERLY CAUSING IT TO SLIP AND HIT INJURED IN THE MOUTH, RESULTING IN AN ACCIDENT.

EMPLOYEE HAD DISMOUNTED MACHINE AND TAKEN PERSONAL BELONGING TO THE SHOP. HE NOTICED A BROKE MIRROW, GOT SOME TAPE AND WENT BACK TO THE TRUCK TOTAPE THE MIRROW SO IT COULD MAKE IT THROUGHT THE DAY. AS HE WAS CLIMBING THE LASDDER, HIS FOOT SLIPPED. AFRAID HIS FOOT WOULD GET CAUGHT IN THE LADDER, HE PUSHED HIMSELF BACK AND TURNED LOOSE, FALLING APPROXIMATELY 6' HITTING THE GROUND W/

PLACED DRAIN PAN UNDER DIFFERENTIAL. PLACE 3/4" DRIVE RATCHET IN PLUG. APPLIED FORCE TO HANDLE. THE PLUG WAS TIGHT CAUSING EMPLOYEE TO USE GREATER FORCE. THE PLUG BROKE LOOSE CAUSING EMPLOYEE 'S HAND TO TRAVEL DOWN FAST PINCHING FINGER BETWEEN RATCHET HANDLE AND PAN.

EMP FELL TO GEOUND LEVEL WHILE TRYING TO DISMOUNT THE DOZER FROM THE REAR LEFT HAND SIDE. MISSED THE LADDER WHILE MAKING THE TRANSITION FROM THE STEPS TO THE LADDER. SAYS HE GRABBED FOR THE HA NDLE AND MISSED WHEN HE REALIZED HE MISSED THE SEP. FELL APPROX 3', LANDING HEAD FIRST.

EMPLOYEE WAS SITTING IN THE SEAT OF THE HAUL TRUCK BEING LOADED BY THE EX1100 SHOVEL. AS THE SHOVEL SWUNG AROUND TO DUMP IN THE TRUCK BOX, IT WAS NOT QUITE HIGH ENOUGH AND THE BUCKET OF THE SH OVEL STRUCK THE TOP LEFT REAR CORNER OF THE TRUCK BOX.

INJURED & 3 CO-WORKERS WERE REPLACING V-BELTS ON$2 CONVEYOR AFTER THEY WERE THROWN OFF. WE HAD ALL THE BELTS ON & ONE OF THEM WAS TWISTED SO WE TURNED MOTOR SHEAVE WITH 24" PIPE WRENCH TO GET IN UNTWISTED IN DOING SO THE BACKSTOP RELEASED AND THE PIPE WRENCH FLEW OFF HITTING EE IN THE HEAD. HE WAS STANDING BY AFTER TRIMING A GUARD THAT WAS GETTING IN V-BELTS THROWING THEM OFF.

EE WAS HELPING OTHER CHANGE A PIECE OF SKIRTBOARD RUBBER ON C-16. AFTER REPLACING ONE PIECE, EE BEGAN CUTTING SLOTS FOR THE BOLTS ON THE SECOND PIECE, USING A UTILITY RAZOR KNIFE. WHILE CUTTIN G, HE PULLED THE BLADE TOWARD HIMSELF AND THE BLADE CAME THROUGH THE RUBBER AND ENTERED HIS RIGHT THIGHT.

TRYING TO REMOVE A LEFT CLAM CYLINDER OFF THE HITACHI EX1100. TEMOVED THE TOP PIN GNA TRIED TO LET ROD BACK DOWN IN BARRELL, WHEN IT CAUGHT. COWORKER PUT A 4' PRY BAR THROUGH THE SIDE OF SHOVE L TO KEEP CYLINDER STRAIGHT WHILE USING HYDRAULICS TO LET ROD DOWN. ROD CAUGHT BAR IN PIN HOLE OF ROD, BREAKING END OF BAR, CAUSING BAR TO FLY OUT STRIKING INJURED IN LEG.

EMPLOYEE WAS GATHERING SAMPLES [LIFTING BAGS OF ROCK FROM #7 CONVEYOR] HANDING THEM TO OTHER EMPLOYEES. IN THE PROCESS OF LIFTING A BAG & TURNING TO HAND IT TO ANOTHER EMPLOYEE. SHE INJURED HE R BACK.

GARY DUTY WAS CHECKING AND STARTING THE HAUL TRUCKS FOR THE DAYS OPERATION. WHILE WALKING IN FRONT OF THE TRUCK, HE SLIPPED ON LOOSE ROCK AND FELL. WHEN DOING SO HE GRABBED THE HAND RAIL ON THE FRONT OF THE TRUCK WITH HIS RIGHT HAND, BUT CONTINUED TO SLIDE PULLING HARD ON HIS RIGHT ARM AND SHOULDER, CAUSING INJURY TO SH0ULDER.

WHILE TRYING TO POSITION BRAKE ASSEMBLY IN EQUIPMENT, IT MOVED AND PINCHED THE RIGHT INDEX FINGER, CAUSING IMMEDIATE DISCOLORATION AND SWELLING.

HOME MADE PULLERS WERE BEING USED TO PULL FLY WHEEL ALONG WITH A HYDRAULIC JACK. THE PULLER BROKE STRIKING THE EMPLOYEE ON THE RIGHT CHEEK BONE.

HOLE POURED INTO CONCRETE FOR THE 5 1/4' STD HEAD TO BE SET IN WAS UNCOVERED SO THAT THE HEAD ASSEMBLY COULD BE SET DOWN. INJURED STEPPED INTO HOLE BRUSING HIS RIGHT THIGH.

WHILE TIGHTENING BOTLS ON A TRACK ROLLER, HE PULLED ON A WRENCH. HE FELT A TUG IN HIS BACK.

WHILE INJURED WAS MOVING SCREEN CLOTH, IT MOVED AN UNEXPECTED WAY AND HE DROPPED IT ABOUT 12 INCHES ONTO HIS FOOT.

VEE BELTS ON THE JAW CRUSHER WERE LOOSE;WHEN THIS WAS DISCOVERED THE JAW WAS SHUT DOWN TO CORRECT PROBLEM.THE INJUREDS HAND WAS CAUGHT BETWEEN THE VEE BELT AND MOTOR SHEAVE.

A ROCK, APPROXIMATELY 2 1/2" DIA. FELL STRIKING EMPLOYEE IN THE BACK OF THE HEAD BELOW THE HARD HAT.

EMPLOYEE WAS CLEANING OUT BUCKET ON LOADER WITH SLEDGE HAMMER AND TWISTED HIS BACK

EMPLOYEE HELPING MECHANIC PLACE HYDRAULIC CYLINDER ON DOZER. EMPLOYEE CAUGHT RIGHT HAND, MIDDLE FINGER BETWEEN CYLINDER AND DOZER FRAME.

EMPLOYEE CLEANING AROUND CONVEYOR BELT. ROCK FELL FROM BELT AND STRUCK EMPLOYEE IN LOWER PART OF BACK.