Buscar en el registro

Employee was loading dirt out of a stockpile, the overhang material fell and buried the front of the loader, breaking the windshield out and buried the employees legs in the loader

Employee was helping to set up plant, was lining up chute to be attached, when chute swung around and caught left hand of employee between chute and plant.

Employee had his annual hearing test, results were received at our office on July 11, 2008, in which was stated the employees left ear had a standard threshold shift.

Employee was helping take the cage off of the jaw crusher. He was standing on a ladder, the ladder slipped and he fell approximately 3' to the ground.

EE WAS TURNING THE JAW AT THE WASH PLANT WITH A PIPE WRENCH. JAW WAS HARD TO TURN. IT FINALLY GAVE AND EE'S MIDDLE FINGER WAS CAUGHT IN BETWEEN PULLEY AND PIPE WRENCH. WASH PLANT WAS SHUT DOWN AT THE TIME.

EMPLOYEE WAS STANDING IN A LOADER BUCKET APPRXO 12' H, MOVING WIRES OFF OF A CONVEYOR. EMPLOYEE FELL APPRXO 12' TO THE GROUND, POSSIBLE ELECTRICAL SHOCK. EMPLOYEE LANDED ON SHOULDER, NECK NEC K AND HEAD.

EMPLOYEE WAS EMPTYING THE HOPPER, AT THE WASHPLANT. HIS HAND WAS ON THE LEVER AND TH ETHIRD FINGE ROF HIS RIGHT HAND WAS CAUGHT BETWEEN THE LEVER AND THE TRUCK, WHICH CAUSED A BREAK IN THE TI P OF HIS THIRD FINGER.

EE WAS BACKING TRACTOR UP TO CONVEYOR TO MOVE IT. FOOT SLIPPED OFF CLUTCH AND HE BACKED UP MORE WENT UNDER CONVEYOR. PUSHED HIM FORWARD. HE BROKE STEERING WHEEL WITH FORCE. IN HOSPITAL OVERNIG HT HAS SEVERELY BRUISED BACK.

EE WAS PUTTING A V-BELT ON A PULLEY AT THE WASH PLANT. BELT WENT AROUND AND CAUGHT EE'S FINGER BETWEEN PULLEY AND BELT. FINGER WAS CUT AT THE TIP OF THE FINGER.

EMPLOYEE WAS WELDING HAND RAIL ON WASH PLANT, HE THEN STEPPED DOWN. WHEN HE STEPPED BACK UP TO WHERE HAND RAIL WAS, HE GRABBED HAND RAIL WHERE HE HAD WELDED, HE THEN RELEASED RAIL QUICKLY AND FELL 2' TO 3' TO THE GROUND. EMPLOYEE LANDED ON HIS FEET.

HE WAS WORKING AT THE CMI PLANT. WHEN HE BENT OVER AND PICKED UP A PLANK, HE EXPERIENCED LOW BACK STRAIN. HE DID NOT REPORT THE INJURY TO HIS SUPERVISOR UNTIL 12-27-92.

EE WAS KNEELING DOWN TO DO MAINTENANCE ON CONVEYOR. WHEN HE GOT UP, HE EXPEREINCED A SHARP PAIN IN HIS KNEE.

EE WAS CLIMBING DOWN LADDER AFTER CHANGING SCREENS AT WASH PLANT. HE STEPPED OFF LADDER AND SPRAINED HIS ANKLE.

I.NAME LEANING OVER THE EDGE OF A CONVEYOR TO GREASE A BEARING.SLIPPED AND FELL 8'.

THE EMPLOYEE WAS LEANING OVER AND CLEANING ROCKS OUT OF THE CONE AT THE WASH PLANT AND THE OVERHEAD CONVEYOR WAS TURNED ON.ROCK STRUCK HIS SHOULDER AND BACK.

EMPL PUSHING ROCK OFF CONVEYOR STEPPED ON ROCK AND SPRAINED ANKLE.

EE WAS CUTTING A BEARING ON A SHAFT ON A CONVEYOR AND A SMALL PIECE OF STEEL WENT INTO HIS EYE.

HAD BEEN LOADING TRUCK WAS EXITING THE LOADER SLIPPED AND FELL.

WAS RUNNING HOT MIX PLANT, DOOR WAS OPEN ON SHCACK AND AS HE WAS TRYING TO SHUT IT THE WIND CAUGHT THE DOOR AND SLAM THE DOOR SHUT. THE EMPLOYEE THUMB WAS IN THE DOOR JAM.

WAS WALKING FROM MIXER TOWARD CONTROL SHACK, SLIPPED ON 2" PIECE OF HARD ASPHALT AND DISLOCATED VERTABRAE.

CLEANING FEED CONVEYOR SCREEN OFF,HAMMER HIT IRON AND RICOCHTED AND HIT FINGER.

GRINDING ROUGH EDGES OF STEEL ON TRAP & SMALL PIECE OF STEEL FLEW INTO EYE.

WIND BLEW PARTICLE IN EYE.

TIGHTENING BOLTS ON CONE CRUSHER PULLED ON WRENCH & SPRAINED BACK.

LIFTING ELECTRIC MOTOR AT WASH PLANT.

LIFTED ROCK OFF BELT IN CONFINED AREA AND TURNEDDISLOCATED VERTABRAE.

REMOVING LODGED ROCK FROM TAIL PULLEY,RIGHT ARM UPPER MUSCLES AND CHEST MUSCLES INJURED.

EMPLOYEE WAS HE5PING TURN A WHEEL ON A PORTABLE CONVEYOR. HE SLIPPED ON THE ICE AND BROKE HIS ANKLE.