Buscar en el registro

EMPLOYEE WAS OPENING 1 1/2IN H OPPER DOOR ON PLANT HAND SLIPED & WEIGHT OF DOOR SHIFTED ENTIRELY ONTO RT.ARM & SHOULDER

HE WAS PICKING UP A SMALL SHAFT AND PULL MUSCLE ON RIGHT SHOULDER AND NECK.

EMPLOYEE WAS WASHING FRONT END LOADER WHEN WALKING FROM ONE SIDE TO THE OTHER HE SLIPPED AND FELL ON HIS RT SIDE

HE WA> HELPING PUT A HYDRAULIC CYLINGER ON A TRUCK HE MOVED BAK HIT HIS HEAD ON THE BED OF THE TRUCK.

EMP HIT HEAD ON SA(D SCREW ON PLANT WAS WALKING UNDER SAND AUGER, TURNED AROUND AND BYMPED FOREHEAD CAUSING HEAD TO BEND BACK ASND NECK TO MAKING A POPPING SOUND

EMPL HAULING FROM UNDER HOPPER -HAD GOTTEN OUT OF TRUCK-DIDNT LATCH GOOD AND SWUNG OPEN AND HIT HIM IN MOUTH LOOSENING 2 BOTTOM FRONT TEETH AND CUTTING LIP.

EMPLOYEE PARKED HAUL TRUCK NEREAR PLANT SITE;TRUCK BEGAN TO ROLL (ENGINE NOT RUNNING)EMPLOYEE GRABBED FOR THE DOOR TO GET IN AND STOP TRUCK-MOVEMENT OF TRUCK JERKED AT HIS ARM.

EMPLOYEES MAKING PLANT REPAIRS--GREASING ROLLERS ON BELT--GRAVEL ON BELTS--SLIPPED WHILE WALKING/STANDING UPHILL--PULLED RIGHT LEG.

HE WENT BACK OF TEREX REAR DUMP TO PICK UP SOME LIMBS OUT OF FEEDER WHEN ROCK FLEW OUT OF CRUSHER & HIT HIM ON LEFT SIDE OF HIS RIB.

EMPLOYEE HAD BEEN CLEANING RAMP ON PLANT SLIPPED & FELL ON STEPS

EMPLOYEES WERE 4AKING PLANT REPAIRS - INJURED CAUGHT LEFT HAND BETWEEN ROLLER AND BELT AND SMASHED IT

WORKING ON PLAN7 REPAIRS--HITTING A CHISEL WITH HAMMER--PIECE OF CHISEL BROKE OFF AND LODGED IN LEFT HAND,5TH OR LITTLE FINGER.

EE HELPING TO 3NSTALL BRAKES ON A TRUCK.

PIPE STAND FELL3AND A PIECE OF TWO BY FOUR HIT HIM ON HIS RIGHT SHOULDER. HE HAD A BRUISED RIGHT SHOULDER

A PIECE OF WELD3NG SLAG PIP OFF AND ENTERED HIS LEFT EYE AS HE WAS TIGHTENING A BOLT ON A SHAKER SCREEN

OPERATOR WAS SE7TING ON A STOOL IN FRONT OF GRINDER SHARPENING SOME DRILL BITS HE HEARD A NOISE BEHIND HIM AND TURNED AROUND TO SE WHAT IT WAS AND HIS RT KNEE WENT INTO GRINDER

EMP WAS OPENING3HOPPER DOOR ON PLANT HE WAS PULLING LEVER SLIPPED AND FLL BACKWARDS TWISTING BACK

CHNGING OFF THE ROAD TIRE 1600-25 WAS REMOVING WHEEL FROM MACHINE TO REPAIR.

LOST HIE FOOTING & SLID DOWN A HILL ABOUT 8FT & TURNED HIS ANKLE (LEFT)

OPERATING FRONT END LOADER - PULLED CONTROLS ON MACHINE AND PAIN CAUGHT IN SHOULDER.

REPAIRING ON PLANT WORKING ON CRUSHER-HAD COME-ALONG ON PULLEY-CHAIN BROKE AND HIT HIM IN FACE AND HAND

EMPL FAILED TO TAKE PROPER PRECAUTIONS IN PROTECTING HIMSELF-DIDNT GET UNDER AIR COMPRESSOR -TO PREVENT FALLING ROCKS FROM HITTING HIM.

REPAIRING ON D-7 CAT EMPL WAS UNDER MACHINE AND WRENCH SLIPPED HITTING HIM IN MOUTH AND CHIPPING TOOTH.

PUTTING OFF A SHOT EXXPLOSIVES WAS USING A 631 SCRAPER FOR PROTECTION. A FLYING ROCK HIT BETWEEN THE GOOSE NECK & FENDER ON T HE SCRAPER & BOUNCED UP & HIT I.NAME IN THE LWOER BACK.

PUTTING OFF SHOT OF EXPLOSIVE,USING 631 SCRAPER FOR PROTECTION.FLYING ROCK HIT BETWEEN GOOSE-NECK AND FENDER ON SCRAPER AND BOUNCED UP AND HIT I.NAME ON LEFT SHOULDER.

CHANGING CABLE TO BOOM ON AMERICAN DRAGLINE, CABLE CAUGHT ON WHEEL AND WOULDN\T MOVE; EMPLOYEE HAD HAND ON SPOOL AND WHEN CABLE LOSE AND TURNED, IT CAUGHT HIS, THE INJURED EMPLOYEE, FINGER IN THE CABLE.

EES WERE LOOSENING CRUSAHER ON PLANT, HAD CABLE WRAPPED AROUND CRUSHER, LOADER WAS PULLING ON CABLE TO LOOSEN CRUSHER, CABLE TIGHTENED ACROSS INJURED PERSONS LEFT RING FINGER.

EMP WAS MAKING REPAIRS ON 80D DRAGLINE WAS ON TOP OF MACHINE AND WAS LETTING THE COME ALONG TO THE GROUND WHEN IT DROPPED THE HOOK END OF THE COMEALONG CAUGHT IN HIS GLOVE AND JERKED HIM OFF THE DRAGLINE TO THE GROUND APPROX 13 FOOT FALL

STACKING MATERIAL ON THE MODEL 6 DRAGLINE AND THE WIND WAS GUSTING 15-20 M.P.H.