Buscar en el registro

Employee was operating a haul truck. Employee complained of headache & light-headedness. Employee was taken to ER and later diagnosed with a sinus infection & BP issues. Employee was placed off-work until Monday, July 26.

Employee states that EE stepped across water line into some loose material and turned EE's ankle.

Employee was replacing skirt board on stacker belt. Wrench slipped and impacted finger. First aid completed. Employee reported Jan 20 finger was infected and went to clinic. Clinic provided antibiotic/meds; employee released to return on Jan 25.

Miner was changing parts on belt weight scale. Dropped a part and it impacted their right pinky finger.

Excavator operator was repositioning. Swung machine to operator's blind side and bucket impacted side of truck, bending mirror bracket and hand rail.

Employee was exiting water truck when employee spotted a snake in the area. Employee hurried to get back into the truck and sprained ankle while entering.

Miner was helping move/set a wooden form in preparation for a concrete pour. EE got finger caught under the form as it was placed on the ground.

Employee was exiting cab of service truck. Turned knee when foot contacted the ground.

Miner was in the shop using a hand-held grinder to prep a metal surface. EE moved to another section and felt pain in lower back. EE was taken to a medical clinic, examined, given anti-inflammatory meds and released to light duty work. On June 19th EE returned to the clinic and was released to return to full duty work.

Using impact air wrench to remove bolt to replace gravel screen. Placed hand on nut head and wrench spun nut head, cutting finger.

Picked up five (5) gallon bucket out of company truck - pulled back muscle.

EE was training a new haul truck driver. EE was sitting in the jump seat next to door. Haul truck encountered a rough road condition and the EE bumped his shoulder against door of truck.

Employee stood up after kneeling, experienced knee pain (popped). Incident reported 8/25/14. Visit to Dr on 9/2/14, with light duty work.

Operator adjusted fan & cut finger on fan housing. Initial treatment first aid only. Soreness led to doctor visit on 9/20/13, with cleaning and medicine only. No lost time.

Lifting out scrubber roller, roller shifted to caught finger.

Working/walking near sand pump/pipe. Hit leg on lifting eye. Required 4 stitches.

Employee closed door to dredge control room on finger

Employee set grinder down before wheel stopped. Grinder kicked back & hit finger (L index). Stitches required. Guard in place. Eye/face protection worn.

EE Chipping slag off weld, got something in eye. Did not report until questioned by foreman 6/5/12. Sent to doctor for check, Received meds and returned to work. Not regular mine Employee

Leaned on pipe that had just been welded & burned spot on left lower forearm. First aid completed. Failed to inform anyone that he went to ER on 4/20/12.

Employee was removing a tire from the rim using a tire tool. When tire broke loose from the rim the tire tool hit employee on the left cheek, approximately 2" below the eye. The result was a contusion and laceration on his cheek.

Miner using a socket wrench to adjust belt. Tool slipped and miner struck elbow on frame. Miner did not want to go to the doctor on date of incident. Elbow soreness continued & he went to the doctor on March 3, 2011. Medication prescribed. No lost time or restriction.

Employee was assisting in changing out a 4" check valve in the water piping to a log washer. A rope was used to aid in lowering the valve to the work platform. While lowering the valve it came loose from the rope, falling and hitting the employee on the left fore foot causing a contusion and bruising of the foot,

EE was trimming belt wiper. Knife slipped and cut his left thigh.

EE was lifting plate to begin repair felt pull in his back.

Employee fell exiting the excavator.

Employee put left hand on cable to remove slack. He was holding control in right hand. Employee pressed incorrect button & finger was pulled in sheave. Returned to work (light duty) on 11/9/09.

Assisting in replacement of hydraultc cyinder holding cylinder to prevent movement.

Moving cutting edge in storage area. Paint caused two (2) new edges to stick together & lifted both - straining shoulder.

Counterweight was being removed with power purge. Piece broke off counterweight to struck foreman in back.

Employee climbed over framework (I-beam) between frame and belt to repair belt clamp. After repair, employee bruised rib area while exiting.

Used pocket knife to cut cable tie. When knife passed through cable tie, he stabbed left hand.

Cleaning material chute with punch bar. Hit finger on side of chute.

EE was shoveling material under tunnel belt, strained shoulder. Reported injury to foreman on 3/29/07 in the PM. Doctor vistit on 4/2/07.

Backing dozer in stripping area, backed over a pile & jarred his back on the landing; aggravated an old back injury.

EE was assisting his foreman remove a damaged spray baiz when the pipe wrench being used to remove the pipe fell and hit employee above his upper lip on the left side of his mouth causing laceration just above his lip.

Gravel chute clogged. Pushing chute lever with left hand, chute cleared, lever shifted pinching finger on metal bracket.

LIFTING BUCKET TO ADD WATER TO RADIATOR ON GENERATOR. USED BOTH HANDS. BROKE BONE IN LEFT HAND.

WORKER WAS DESCENDING STAIRWAY FROM CONTROL HOUSE OFFICE TO GROUND LEVEL. HIS FOOT SLIPPED FROM THE STAIR TREAD. WORKER FELL BACKWARDS ONTO CONCRETE SLAB DISLOCATING HIS RIGHT SHOULDER

HE WAS HELPING SET A MUD PUMP INTO THE POND AND THE CHAIN LINK BROKE. THE BROKEN LINK FLEW ABOUT 20' AND HIT HIM IN THE FACE.

USING A WRENCH TO TIGHTEN A BOLT ON THE SAND PUMP.

USING A SHOVEL TO DIG MUG FROM A DRAIN PIPE.

USING PRY BAR TO ALIGN BOLT HOLES STRAINED RIGHT SHOULDER.

HE WAS CUTTING A PIECE OF BELT WHEN THE KNIFE HE WAS USING SLIPPED AND CUT HIS LEG.

EE WAS WORKING TO ASSEMBLE/SETUP CRUSHER SCREENING UNIT. HE FELL/STEPPED INTO A HOLE, BRUISING ELBOW.

REMOVING SANDROCK FROM GRIZZLY. DROPPED ROCK ON RIGHT HAND.

REPLACING TEETH ON EXCAVATOR BUCKET. HAMMER WAS USED TO UNWEDGE TEETH. METAL SLIVER CAME OFF TEETH STRIKING EE IN STOMACH.

REMOVING HYDRAULIC PUMP, STRAINED SHOULDER (L) WHILE MOVING PUMP.

EMPLOYEE WAS EXITING AN OFF-ROAD TRUCK. HE WAS CLIMBING DOWN THE LADDER AND HE MISSED A STEP, TWISTING HIS RIGHT ANKLE.

CLEANING AIR CANNON WHEN COMPRESSOR WAS TURNED OFF. STORED ENERGY EXPELLED, BLOWING SAND/DEBRIS INTO FACE AND HANDS.