Buscar en el registro

Persistent Standard Threshold Shift identified during annual audiometric testing. Noise dosimetry data consistent with exposure below action and permissible exposure limits.

Employee performing hot work, finished, lifted shield before leaving work area, slag bubble popped, debris abraded left eye requiring evaluation and treatment.

While walking to enter forepersons pickup truck, miner was watching footing and not looking ahead. Miner struck forehead on corner of pickup truck forcing hard hat up and off of head and causing laceration to forehead. 8 stitches required; employee released to full duty same day.

Mechanic removed cutting edge from loader bucket. Following removal and placement of old cutting edge inside bucket, they pushed the cutting edge out of the way. In doing so, the edge lacerated glove through to left index fingertip. 4 stitches required.

While cleaning ground below and adjacent to a troughing belt, a 4 inch diameter stone fell from a height of 11 feet and struck the employee on the right shoulder. Contusion to right shoulder resulted.

The employee retrieved overalls and was walking away from personal vehicle when they stepped on a patch of ice. Employee lost footing, slipped and fell landing on left shoulder.

EE using bottle jack to remove plate from crusher. Plate came free and threaded rod struck employees left hand. .25" skin avulsion on hand.

While walking on cat walk preparing to clear it off, employee stepped on a golf size stone and fell against the steel top rail causing injury to EE's ribs and abdomen

While cleaning off cat walk next to 6x16 screen on secondary a rock popped out and hit employee on the right shoulder

While attempting to lift a 200 lb roll of belting with another employee injured employee strained back

While cutting rubber roll "nose rubber" with utility knife, the knife slipped and cut employee's left hand (palm)

Employee while greasing loader tripped on grease house and strained employee's right knee

Failure to follow company SOP. Failure to complete JHA. Incorrect tool used. Freezing temperatures. Injury - pinch point, struck by - Laceration to finger requiring stitches.

Employee was clearing snow and ice from loader, was overreaching and pulled a muscle in back

While using a push scraper to clean up he unexpectedly hit the edge of a metal plate. The scraper kicked back and the handle hit his left cheek causing a left bottom tooth to break and need removal.

Employee was using a rake to clear the buildup of dust under a conveyor and strained his back muscle

While lifting a head pulley guard to reattach he felt a pull on the right side of his back.

While operating a haul truck debris came out of heater vent and imbedded in eye.

Employee exited catwalk and climbed down ladder. He hit his right knee on a hook that used to hold a hanging ladder. The hanging ladder had been removed from service but the hook wasn't. The hook fell between the rungs of the ladder the employee was using. The hook had a sharp edge that lacerated employees knee.

Employee states he had pain in shoulder for past 7-8 months and didn't report it. He couldn't stand it anymore and went to the doctor on 9/17/12. Doctor diagnosed bursitis from repetitive overhead motion at work.

Employee was using punch on belting, he let go of punch after he had it seated and then hit it with a hammer. The punch came back up and hit him in the left cheek causing a laceration requiring 5 stitches

Employee had lifted hard hat to wipe sweat from brow. Stone came off of catwalk went behind his safety glasses and hit lower lid of left eye causing a contusion that required a prescription

Employee was using hammer to hit a chisel, head of hammer came free. Head then hit side of concave ring, deflected off ring hitting employees leg. Employee states he received a small scrape. He didn't initially report incident. Date of initial injury is unknown date filed is approx. The scrape became infected and employee then notified his supervisor on 2/8/2012

Windy

WHILE CUTTING BELTING WITH A UTILITY KNIFE THE KNIFE SLIPPED AND HE CUT HIS WRIST

While cleaning snow out of a rock box EE turned and slipped hitting his right side and ribs on the steel edge of the box.

Hearing test showed recordable standard threshold shift.

Hearing test shows recordable hearing loss per standard.

Employee cleaning loader slipped and fell, fractured right wrist.

While repairing conveyor belt, employee was reaching for tools by standing on his tip toes when he felt his knee pop.

While changing out a screen, employee hit his hand on a dust cover that came loose. He attempted to grab it and instead, he caught his finger between it and the screen, causing a laceration.

EMPLOYEE WAS USING A WRENCH TO LOOSEN A BOLT. THE WRENCH SLIPPED AND HE HIT THE PALM OF HIS LEFT HAND ON THE EDGE OF A PIECE OF STEEL CAUSING A LACERATION. HE WASN'T WEARING GLOVES

The employee decided to use a different piece of equipment to do the task other than what had been discussed with the supervisor. The equipment he chose wasn't capable of supporting the load he was handling.

While drilling, the bit stopped causing the drill motor to spin unexpectedly in his hand, fracturing EE's finger.

EE was cutting holes for bolts, when a piece of slag dropped on his forearm, causing 2nd degree burns.

While operating a skidsteer, EE reached out to adjust a guard and skidsteer moved, causing him to catch his finger in the guard.

Employee was helping to remove a return idler from a conveyor, when the idler fell down and cut his finger.

Employee states he was climbing fixed ladder located on water tank when he hit his head on the cage causing him to fall backwards.

Sprain, strain lower back. Staging. 50lb bags of anfo.

Employee states while lifting a bag of wet rags off the conveyor he twisted his back.

Employee states while driving haul truck he hit a pothole, seat bottomed out, and his back was strained.

Employee was using a chain fall during the changing of a toggle plate on the jaw crusher. A link broke causing the chain to kick back and hit the employee in the forehead

While cutting rubber with a knife the knife slipped cutting left hand.

Employee was handing a hose to another employee when he stepped over the handrail, slipped and fell.

Eployee states he twisted left knee while throwing debris in dumpster.

Employee claims he strained back from riding in the haul truck.

While carrying a hole cover (2' by 3' rubber mat) tripped and fell to the ground.

Claims he unbuckled seatbelt ,while haul truck was being loaded with shot rock, to get a water bottle. The force of the rock being loaded caused him to be bounced out of the seat and he hit his head on the top of the cab. Strained neck muscles. Also claims he hit his head earlier on a piece of conduit he forgot to duck.

Employee lost grip on manhole cover while moving it causing it to drop on his toe. Broken toe on right foot (big toe).

WHILE APPLYING BELT DRESSING EE STATES HE PLACED HIS HAND ON BELT JUST BEFORE IT WAS STARTED UP. BELT STARTED, PULLED HIS FINGERS AND CAUGHT THEM BETWEEN BELT DRIVE AND SHEAVE. RECEIVED RX, FRACTURED TIP OF FINGER.