Buscar en el registro

EMPLOYEE WAS CLEANING UNDER PLANT. WEDGE FELL OUT OF CRUSHER ABOVE HIM FELL AND HIT HIS HEAD.

EMPLOYEE WAS CLIMBING UP ON A CONVEYOR TO REPAIR A TORN BELT. HE PULLED AGAINST A GUARD, LOST HIS BALANCE AND FELL, INJURING HIS HEAD.

EMPLOYEE WAS CUTTING BELTING- KNIFE SLIPPED (STITCHES)

WASCLEANING SURGE TUNNEL, PICKED UP A ROCK AND INJURED BACK.

INJURED WAS INSTALLING A SEAL IN CYLINDER USING A SCREWDRIVER AS A PRY TOOL IT SLIPPED AND HE PUNCTURED HIS HAND INFECTION DEVELOPED HOSPTILIZED.

EE CLIMBED UP ON R-35 BUMPER TO CHECK HIS ENGINE SLIPPED AND FELL.

EMPLOYEE WAS TURNING CONE CRUSHER BY HAND TO MOVE FINGERS BEFORE THEY WERE PINCHED IN V-BELT GROOVE.

EMPLOYEE HAD INSTALLED BRASS LINER BUSHING IN A CONE CRUSHER. SLIPPED AND FELL. JAMMED KNEE.

EMPLOYEE WAS CLEANING UNDER PALNT SLIPPED AND FELL-AS HE FELL HE STRUCK HIS HEAD ON A PIECE OF METAL ON A PLANT SUPPORT.

EMPL CHANGING GREASE FITTING ON SCREEN-ECCENTRIC COUNTERWEIGHT ROLLED AND CUT EMPL FOOT.

EMPLOYEE WAS CHAINGING PLANT SCREEN BEARING. HIT WITH HAMMER. PIECE BROKE OFF-END STRUCK EMPLOYEE.

WA S WORKING IN GRAVEL BIN-FELT SICK

WAS INSTALLING A SPRING ON A R-35 EUCLID TRUCK USING A CHAIN HOIST-CHAIN BROKE LETTINGA FRAME FALL ON EMPLOYEE GLANCING BLOW.

EMPL HAD CLIMBED UP ON ROLL CRUSHER TO CHECK TAKEUP PULLEY AS HE CLIMBED DOWN HE LOST BALANCE & APPARENTLY JUMPED ABOUT 12'.

USING DRY BAR TO ALIGN CHUTE-BAR SLIPPED AND RIGHT INDEX FINGER STUCK PIECE OF STEEL PLATING.

END DUMP DRIVER DUMPED A LOAD OF ROCK INTO FEED HOPPER. A ROCK BOUNCED THROUGH THE OPERATOR'S CONTROL HOUSE AND STRUCK THE OPERATOR.

BOULDER HUNG IN CRUSHER EMPLOYEE USING A LOADER TOOTH TO WEDGE AGAINST BOULDER TOOTH SHATTERED PIECES STRUCK INJURED EMPLOYEE.

CUTTING CONVEYOR WIPER BELT KNIFE SLIPPED CUT HAND.

EMPLOYEE BURTN ARM ON CONVEYOR BELT ROLLER. TREATED FIRST AID CASE. INFECTION DEVELOPED NOW REQUIRES A SKIN GRAFT.

PICKED UP ROCK INJ BACK

EMPL WAS STANDING ON PLATFORM CHECKING WATER IN RADIATOR AS HE STEPPED FROM PLATFORM TO LOADER HE SLIPPED AND FELL

EMPL WAS WORKING ON TRUCK IN SHOP. AS HE GOT UP OFF OF CREEPER HE TWISTED KNEE. CONTINUOUSLY GOTWORSE HAD TO HAVE SURGERY 11/27/89.

EMPLOYEE <WHILE OPERATING A DRAGLINE| REACHED & MOVED A TOOL BOX BEGAN LOSING TIME 101089

EMPLOYEE WAS GREASING HEAD PULLEY SLIPPED ON ROCKS ON CATWALK SKINNED KNEE.

EMPLOYEE REPORTED ON 8-18-89 THAT HE HAD PULLED A MUSCLE SHOVELING AROUND 8-13-89, WORKED THROUGH 8-21-89, TOOK OFF.

EE ALLOWED END LOADER TO FREE WHEEL LOADER STRUCK BEAM AND SHOOK UP EE.

EMPLOYEE LIFTED A PIECE OF ANGLE IRON.

EE WAS STANDING IN LOADER BUCKET CHANGING ROLLER ON CONVEYOR OPERATOR ALLOWED LOADER TO MOVE FORWARD MASHING EE AGAINST LOADER BUCKET.

CHANGING HAMMERS ON IMPACT CRUSHER CUT ARM ON SHIM

HELPING INSTALL A CONVEYOR BELT, PULLED MUSCLE IN BACK.

WAS WORKING ON CEDAR RAPIDS SCREEN PUT HAND IN SIDE OPENING TO REMOVE CABLE HOIST HOOK ECCENTRIC SHAFT ROLLED BACK & CAUGHT HIS HAND BRUISING IT.

QUARRY FLOODED.PUMP HOSE WAS STUCK IN MUD.EMPL TRIED TO FREE HOSE FROM MUD,PULLED MUSCLE IN BACK.

BUILDING CATWALK ON PORTABLE CRUSHER MASHED FINGER BETWEEN CHAIN AND CATWALK.

EMPL PLACING CABLE AROUND BOULDER IN PRIMARY CRUSHER CABLE PULLED AGAINST HAND CUTTING LITTLE FINGER.

;MACHINE SLID IN MUD OPER OPENED DOOR DOOR SLAMMED ON THUMB.

WHILE RAW MATERIALS WERE BEING DUMPED INTO GRIZZLY, A ROCK SPLIT AND A PORTION FELL OFF PLANT AND STRUCK EMPLOYEE ON HEAD.

EMPLOYEE WAS PLACING A CABLE AROUND SOME PUMP PARTS WHEN THEY FELL & STRUCK HAND & WRIST BLOCKS TOOK IMPACT OF FALLING MATERIALS

INSTALLING TRACKS ON DRAGLINE USING 3/4" EYE BOLT TO PULL TRACKS ON MACHINE-BOLT BROKE AND STRUCK HAND.

EMPL LOWERED PROTECTIVE PUMP COVER AMD FAILED TO REMOVE HIS HAND.

WORKING ON WATER PUMP BENT OVER BUMPED FACE ON IRON BAR.

CUTTING CONVEYOR BELT WITH POCKET KNIFE-IT SLIPPED AND CUT PALM OF LEFT HAND.

EMPLOYEE WAS HELPING PATCH A CONVEYOR BELT AND CUT HAND WTH DRILL BIT.

EMPLOYEE WAS BACKING DOWN LADDER FROM JAW PLATFORM AND HIS FEET SLIPPED OFF A RUNG AND HE FELL ABOUT 8 FT.

EMPLOYEE WAS PUSHING POSTIONS OUT OF A DIESAL ENGINGE, USING A HAMMER HANDLE, HANDLE SLIPPED OFF CONNECTOR ROD END STRUCK FINGER, MASHING IT AGAINST BLOCK.

EMPLOYEE WAS CUTTING HOLES IN BELT LAGGING, KNIFE BLADE BROKE, KNIFE SLIPPED, CUTTING EMPLOYEEHS HAND.

HE WAS CHANGING BARREL OF GREASE ON GREASE TRUCK WHEN LID SLIPPED OUT OF HIS HAND.

EMPLOYEE WAS TIGHTENING BOLTS ON TRACK ON D-8 DOZER, WRENCH SLIPPED AND HE STRUCK HIS HAND AGAINST THE DOZER FRAME.

FELL OFF LADDER (MISSED STEP) WHILE WORKING ON CONVEYOR GEAR BOX.

CHANGING SCREENS ON PLANT.

EMPLOYEE WAS PULLING ON V-BELT PULLED FINGER INTO PULLEY.