Buscar en el registro

Employee was opening up the entrance gates to the quarry, slipped on the ice and fell, hitting his head causing a laceration.

Employee was using a cable type come-along. Employee got his finger caught between the cable and the frame of the conveyor that he was working on.

Employee took the radiator cap off of the machine while it was still under pressure. To escape the spray he jumped backwards, hitting his arm and back on the machine carriage.

Employee was replacing the battery in a Euclid rock truck. Employee suffered back strain lifting the battery in and out of the truck.

Employee was cutting a piece of belting with a utility knife and cut his leg with the knife.

Employee was backing a loaded haul truck on a downhill grade in the underground mine. He lost control of the truck and ran backwards into a pillar.

Employee was dragging a water hose, he slipped and fell, injuring his shoulder.

Employee was loading replacement screens into a skidsteer bucket. He got his finger in between the screens and smashed it, fracturing his finger.

Employee was climbing into his truck at the beginning of his shift. He had only one hand on the ladder. When he stepped up he lost his balance and was hanging on with the one arm causing a sprain/strain to his shoulder.

Employee was climbing down, off of the machine, when he stepped down his foot slipped and he fell against the catwalk of the machine.

Employee was removing a chute liner plate. When he removed the plate, the door of the chute came down and hit his arm

Employee is a mechanic, he was trying to line up two holes in a scaler boom to insert a roller, he got his pinkie finger caught in a pinch point causing a laceration.

Operator got out of his machine and picked up a broken shank and tip. He hoisted the broken piece onto the catwalk of the machine. Employee stated he felt pain in his groin at this time.

Employee stated that he was sitting in his truck waiting to load. He got up out of his seat to stretch and felt a pain in his stomach.

One employee handed a piece of steel plate to another employee. The 2nd employee did not have a good grip on it and it fell to the ground with his finger underneath of it.

It was snowing with slippery conditions; the employee fell and strained his groin.

Employee was helping move an air compressor and got his finger caught in a pinch point, causing a laceration that required stitches.

The contract employee was helping to install a counterweight on Gradall XL5110 Scaler. As the weight was lifted into place, one of the connector links of the chain used for lifting broke, causing one end of the weight to strike the ground. This in turn broke the other end, which allowed the weight to strike the employee as it fell.

Loose material became dislodged from the roof. The employee was struck by the falling material, causing blunt force trauma to his lower back.

Employee was riding in a truck. When he went to step down out of the truck he missed the grab rail with his right hand, but was able to catch himself with his left hand. When he caught himself he thinks he pulled a muscle or something.

Employee was picking up material from the ground, there was a snake underneath the material, which bit him on the finger.

The employee (a blaster trainee) was assisting the licensed PA blaster in setting off a shot. After the shot went off (approximately 8-10 seconds) the employee went into the line of the shot and was struck in the shin by a piece of flying debris, requiring him to get 6 stitches in his leg.

Employee was helping to assemble framework for a new conveyor. He was attempting to align a bolt into it's corresponding hole, he got his finger caught between the threads of the bolt and the framework.

Employee was shoveling material from under the belt, he stepped backwards and twisted his ankle.

Employee reports recurrence of symptoms from a previous incident dated 8/16/04 in which he missed 39 work days. His chiropractor documented that the employee could have a potential of flare ups with work activities.

Employee reported that he hurt his back climbing into his machine at the beginning of the shift. the chiropractor said the ee has a sprain.

EMPLOYEE STATED THAT HE HURT HIS BACK HELPING TO LIFT SCREEN PANELS THAT WERE BEING INSTALLED IN THE SCREEN DECK. EMPLOYEE DID NOT REPORT PROBLEM TO MANAGEMENT UNTIL 5/3/04.

Employee was operating the salt spreader truck. He got out of the vehicle and later was having symptoms of a heart attack. The ambulance took him to the hospital and he was diagnosed with carbon monoxide poisoning. It was later determined that the truck had a faulty exhaust system and fumes were entering the cab.

THE EE AND THE FOREMAN WERE REMOVING A BROKEN DRILL STEEL FROM THE HOLE THAT WAS DRILLED, THE BROKEN STEEL SLIPPED FROM THE EE'S HANDS AND CAUGHT HIS LEFT THUMB BETWEEN THE DRILL STEEL AND THE SASH ON THE DRILL.

EE WAS ATTEMPTING TO REMOVE AN OBSTRUCTION IN THE TRANSFER BIN TO THE CONVEYOR. WHILE DOING THIS TASK, HE ENTERED THE BIN WHEN HE EXITED THE BIN HE SLIPPED AND FELL 10 TI 11 FT. TO THE GROU ND BELOW. THIS AREA HAD LOOSE SHOT ROCK (10"MINUS) ON THE GROUND WHICH HELPED INFLICT HIS INJURIES.

TO CORRECT THE HAZARD OVER THE PORTAL AREA OF MINE #2 AT COOLSPRING QUARRY: FIRST AS ACCESS ROAD WILL BE CONSTRUCTED FROM THE PRESENT BACK FILLED AREA TO OBTAIN ACCESS TO BENCH AREA "A". THEN ONCE SAFE ACCESS IS OBTAINED BY USE OF A DOZER & EXCAVATOR, A MINIMUM OF 50 TO 100 FEET WIDTH WILL BE CLEARED OF THE MATERIAL THAT HAS FAILED. WE WILL LEAVE MATERIAL AGAINST BACK WALL FOR SUPP

EE WAS STEAM CLEANING HIS MACHINE. EE CLAIMS HE DID NOT REALIZE HE WAS INJURED UNTIL HE CLIMBED BACK INTO HIS MACHINE. HE SPECUALTES THAT HE CUT HIMSELF ON EITHER THE HANDLE OR HOSE OF THE STE AM JENNY. EE SUFFERED A LACERATION TO HIS RIGHT HAND, REQUIRING STITCHES.

THE STEP ON BULLDOZER BROKE UNDER WEIGHT OF THE EMPLOYEE.

EE WAS EXITING VEHICLE, HE PUT HIS FOOT ON THE FUEL TANK FROM WHICH THE TREADPLATE WAS MISSING, HE SLIPPED & HE LANDED ON HIS ANKLE, CAUSING AN ANKLE SPRAIN. TREADPLATE HAS SINCE BEEN REPLACED .

EE WAS REPAIRING MACHINE, RE-INSTALLING CHAIN. FINGER GOT CAUGHT BETWEEN THE CHAIN AND THE SPROCKET. EE LACERATED HIS FINGER REQUIRING SUTURES.

EE WAS WORKING REPAIRING CONVEYOR BELT. EE STATED THAT WHEN HE JUMPED TO THE GROUND HE EXPERIENCED PAIN IN HIS BACK AND LEG.

EMPLOYEE WAS UNLOADING CONVEYOR ROLLERS; HE TRIPPED OVER A ROLLED UP TARP, TWISTING HIS KNEE AS HE DID.

EE WAS SWINGING A SLEDGEHAMMER SLEDGEHAMMER HEADBOUNCED OFF OF A METAL CHEEK PLATE CAUSING THE HANDLE TO STRIK EE IN LEFT SHIN

EE WAS ATTEMPTING TO CLEAR FROZEN MATERIAL THAT WAS ADHERING TO IDLER PULLEY AT GRAVEITY TAKE UP ON THE DOWNHILL CONVEYOR. THE EE'S LEFT HAND WAS PINCHED BETWEEN THE BOARD AND CABLE OF CONVEYO R STRUCTURE.

EE WAS DRILLING FACE, DRILL JAMMED AND EE GRABBED HOLD OF THE HOT DRILL WITH HIS BARE HAND, BURNING HIS LEFT HAND.

WHILE EXITING THE VEHICLE, EE'S FOOT SLIPPED OFF OF THE FUEL TANK WHILE SIMULTANEOUSLY HOLDING ONTO THE HAND RAIL. ALL OF THE EE'S WEIGHT WAS BEING SUPPORTED BY HIS ARM, RESULTING IN A CONTUSI ON OF THE PECTORAL MUSCLE AREA.

EE GOT OFF OF MACHINE TO MOVE A ROCK THAT WAS BEHIND HIS TIRE. EE PUSEHD THE ROCK OUT OF THE WAYWHEN HE STRAIGHTENED UP HE NOTICED A BULGE IN HIS ABDOMINAL AREA. HE THEN WENT TO THE HOSPITAL TO BE CHECKED OUT

EE WAS PUTTING ANFO HOSE ON POWDER TRUCK. A ROCK FELL FROM ROOF HITTING HIM ON SHOULDER. NOTE: ROCK WAS ABOUT 6" IN DIAMETER.

EE WAS LOADING KEG OF GREASE ON TO LUBE TRUCK WHEN HE STRAINED LOWER BACK.

HAD COMPLETED PULLING GROUND WIRE INTO CABLE TROUGH & MADE GROUND WIRE CONNECTION GETTING READY TO PUT TROUGH COVER ON, WHEN A FLASH TO OUR LEFT OCCURED IN TROUGH.

HAD COMPLETED PULLING GROUND WIRE INTO CABLE TROUGH AND MADE GROUND WIRE CONNECTION GETTNG READY TOPUT TROUGH COVER ON, WHEN A FLASH TO OURLEFT OCCURRED IN TROUGH.

EE WAS STANDING AT PRIMARY JAW IN AREA OF LUBE PUMP. HE REACHED TO CHANGE VEE BELT OF PUMP HE AND IN SO DOING STRAINED AND PULLED MUSCLE ON LEFT SIDE OF CHEST AREA.

EMPLOYEE PARKED DRILL NEAR WIND ROW OF ROCKS ONTO INTERSECTION. HE EXITED THE DRILL AND ATTEMPTED TO REMOVE ROCK NEAR TIRE OF MACHINE BY HAND. IN DOING SO HE MOVED THAT ROCK CAUSIGN ONE ABOV E TO ROLL DOWN STRIKING HIM ON TARSUS AREA OF HIS RIGHT FOOT. HEIGHT OF WINDROW WAS APPROX 3'. THE RESULT WAS BROKEN BONE IN FOOT AREA BEHIND STEEL TOE OF BOOT.

EMPLOYEE PICKED UP SCREEN PANEL AND STRAINED LOWER BACK.

WHILE TIGHTENING NUT ON JAW CRUSHER, SOCKET SLIPPED OFF OF NUT CAUSING RATCHET TO DROP SMASHING FINGER BETWEEN RATCHET AND BASE OF JAW CRUSHER. RATCHET SMASHED TIP OF MIDDLE FINGER OF RIGHT HA ND AGAINST METAL BASE.