Buscar en el registro

Shed area accessible by plants, animals, bugs.

Employee was assisting with the movement of machinery, with hook, clevis and chain attached to a track hoe. Clevis did not fit, so they were changing it out with another hook and clevis located in the track hoe. Track hoe operator tossed the hook from the excavator to the ground. EE tossed the clevis moments later, but employee reached for hook, and then clevis hit EE's hand.

Employee was cutting 2x4 lumber to make crates for finished stone. The lumber "kicked" from the circular table saw, hitting the left thumb.

Left foot to shin got stuck in mud as employee was assisting in the mobilization of quarry saw track. The track moved but employee could not and track hit the knee.

Employee was walking down road area to work area and loose rock caused EE to lose footing and fall to the ground.

Employee left EE's work station to shut off a piece of equipment. Slipped on a spot of oil on floor and fell.

Employee was working to remove slabs from a Hilmer Gang Saw machine. While using a crow bar to separate the slab material, the crow bar slipped causing the employee to strain their back. Employee continued working until job was completed.

Employee working on airline trying to tighten rusted fitting to prevent leaking. Fitting blew out of housing on main plant air feed line injuring hands. Employee has impact burns and small fragments of shrapnel in hands.

Employee operating stationary belt saw when belt jammed in rock. Tried to wedge and pry rock apart. While hitting wedge, chunk of rock/marble broke loose and struck employee in shin. Required 5 stitches.

Employee working on crusher repairs coming down ladder at end of shift slipped on second to last rung of ladder, stumbled and hit/fell into air compressor tongue resulting in bruised left flank.

Employee slipped on wet/muddy marble and caught himself before he landed on the ground, pulled himself up quickly. Complained of lower back pain whether moving or not.

Employee was removing first slab from a block cut on belt using a crane and pry bar. The pry bar slipped causing employee to loose balance and fall against another block behind him. A slabs sharp edge came in contact with arm causing a laceration.

Employee was attempting to move bar saw track with a pry bar. The pry bar slipped, causing employee to lose his balance and fall forward, hitting right knee on the track.

EE removing rusty bolts from piece of eq. by means of drilling. He used punch to indent bolt. He struck punch it fragmented and struck left earlobe. Small piece of metal removed from ear and rec. tetanus shot.

Employee operating stationary belt saw and completing a cut on a block of marble. Standing on platform at control panel, noticed movement to his left. Saw a slab tilting outward, reached to left to very edge of slab. At same time, a 4" x 6" x 5' timber used to hold slabs in place came loose toward employee, came in contact with tip of finger on left hand.

Employee taking slab off polishing line with jib crane/grabs to place on A frame. Slab was leaning and not stabilized. She tried to reposition the grabs but the slab cut her left leg and the weight of the slab or the impact caused her heel to fracture.

Employee were trying to lift up a slab of marble and a piece broke free. The employee tried to move out of the way but the material hit him in the leg causing a deep laceration that required stitches.

Continuous twisting while lifting marble on the tile line. EE complained of lower back pain. Diagnosis-bilateral muscle stain of lower back.

EE working on gang saw trying to work a slab loose that was stuck in blades. When the slab broke free, the EE lost his balance and noticed his knee bleeding after the job was completed, with no pain.

EE fell. EE was measuring a slab located on A-frame. Right foot got stuck on the A-frame and without EE realizing it EE fell when he went to move.

EE was operating an automated polishing line. The hose which supplies water to it came off. He cut off all electrical, then went to back of machine to cut off water source where he slipped and knee buckled causing fall.

No conditions contributing to accident. Tripped while stepping up to platform. Became unbalanced and fell on right leg, then both knees.

Marble material on saw bed, in slab form, used jib crane to adjust slab on bed. Began to lift with suction device and released off slab, causing crane stabilizing bar to move up and hit his chin.

EE operating a Cope saw marble was cut & being taken off table. Cut piece broke while lifting cutting EE's hand.

Employee was lifting, pulling water lines in quarry when a lower back strain was felt.

EE WAS USING A CELL PHONE & STANDING NEXT TO PROPANE HEATER. HER CLOTHING IGNITED, FIRE SPREAD ON THERMAL CLOTHING UNDERNEATH.

OFC. FURNITURE WAS BEING MOVED IN EE'S OFC. EE WAS WATCHING & DIRECTING BUT NOT MOVING ANYTHING. A MARBLE TOP WAS LAID ON FLOR BUT LEANING AGAINST A DESK. OTHER EE BUMPED DESK ACCIDENTALLY CAU SING TOP TO MOVE. EE TRIED TO PREVENT MARBLE FROM FALLING BY REACHING OUT FOR IT.

EMPLOYEE WAS MAKING A CRATE FRO MARBLE USING NAIL GUN. ON 4TH EJECTION OF NAIL, IT SPLIT THE WOOD AT EDGE CAUSING NAIL TO GO THROUGH WOOD, THEN DEFLECTED ON A METAL SQUARE MAKING NAIL HIT FING ER IN RIGHT HAND.

EE WAS OPERATING A STATIONARY AUTOMATIC SHAPING MACHINE. HE FELT SOMETHING IN EYE. FLUSH WAS APPLIED AND HE FELT OK. LATER AT HOME EYE BECAME RED & IRRITATED REQUIRING EXAMINATION.

EMPLOYEE WAS ADJUSTING A RUBBER CUSHION ON A PUSHER BAR THAT ALIGNS TILE INTO THE BLADES FOR CUTTING. WHILE ADJUSTING THE RUBBER INTO THE SLOTTED BAR, THE RUBBER SLIPPED, THE FINGER GOT CAUGHT IN SLOT AND LACERATED RIGHT INDEX FINGER.

EMPLOYEE WAS USING CARBIDE GRINDER WITH GRINDING WHEEL ON MARBLE. THE WHEEL BROKE APART COMPLETELY, WHEEL LACERATED PINKY FINGER AND BURNED MIDDLE FINGER.

EMPLOYEE WAS USING AIR CHISEL, CUTTING VENT HOLE, A PART OF THE MARBLE FELL, THE EMPLOYEE WAS TRYING TO CATCH THE MARBLE WHEN IT CUT HIS RIGHT HAND, THUMB.

EE WAS ALIGNING MARBLE SLAB INTO SAWS BY HAND. SLABS RUN INTO SAWS BY CONVEYOR. THE EDGE OF THE SLAB WAS ROUGH AND SHARP. WHEN SLAB MOVED THE FINGER GOT JAMMED BETWEEN MARBLE AND CONVEYOR ROLL ER CAUSING LACERATION.

EE WAS WORKING ON AN AUTOMATED LOADING MACHINE THAT PICKS UP MARBLE SLABS BY SUCTIONED THE SLABS STUCK TOGETHER. EE TRIED PRYING THEM APART BY HAND CAUSING STRAIN.