Buscar en el registro

Miner was grinding on metal at the Wash Plant. A piece of metal got in employee's eye. Employee was wearing safety glasses at the time.

Employee was splicing a belt at dryer plant. Turned and hit left elbow on the belt guard, cutting elbow. Needed 5 stitches. All power was off at the plant during time of repair.

Flywheel struck employee in the chest causing him to strain his abdomen muscle. First ER visit showed no injuries from accident. A second visit to a Dr. showed a pulled muscles in the abdomen.

In shop fabricating a step. Moving a piece of expanded metal with hands cut left pointer finger.

Employee was walking down the steps, lost footing and fell

EE was walking down stairs. He buckled his left knee.

Working on conveyor belt. He stepped off the belt onto the guard on the floor. The guard moved & turned his ankle.

EE stepped down out of a hauler onto a 2X4 on the ground hurting his left foot.

EE was changing a screen in the plant. The crowbar he was using slipped, smashing the end of his right pinky finger.

Employee slipped coming down step ladder.

EE tripped while climbing into mill at washplant other EE caught him by his left arm. This put a strain on his shoulder.

Metal in (R) eye while welding.

Employee was lifting a propane tank to put in the back of a truck. He injured his lower back when lifting the tank.

Grinding on a pole, rust flew into right eye.

Employee was working in Ball Mill #1, removing Mill liner with a hammer. A piece of the liner struck him in the left eye, was wearing safety glasses.

Employee was unbolting at the crusher plant, the bolt head had become sharp over time. While unbolting the bolt head spun and cut middle left finger of employee. Required 5 stitches.

Using utility knife to open a box, knife slipped and lacerated left wrist/arm of employee.

Employee was helping replace a mill liner at the washplant. He was using a prybar to loosen a bolt when the bar slipped and struck him in the head causing a cut to his forehead that required 7 stitches.

EE was on top of sand silo doing electrical work. He slipped, grabbed a bar above his head, trying not to fall, injured right shoulder.

Employee was climbing down ladder of 988G loader and a sliver of metal from ladder rail entered his hand.

Employee was cleaning under Rod Mill and slipped on a pipe injuring lower left leg by pulling muscles.

Employee fell 7 feet while climbing down ladder at the ball mill (#4). He landed on both of his feet injuring his heels.

Ee was using air hose to blew off a pallet of breaks. A piece of debris hit his in the eye. He was wearing protective glasses. The debris want under glasses.

Employee mashed left foot on bag machine palletizer. A machine part fell on his foot (left).

Employee injured left hand while pushing rods into rod mill.

Employee was washing the floor, pulling a hose around. He hurt his back in the process.

Employee stepped off forklift, turned over left ankle.

EMPLOYEE WAS LEAVING TUNNEL, HE STEPPED ON A HOSE THAT WAS ON THE GROUND. HE TURNED HIS RIGHT ANKLE OVER.

Employee was putting a liner in the mill. A pin that holds the liner broke and liner fell on his left hand's ring finger. Weight of liner mashed his finger.

EE WAS PUTTING LINERS IN THE ROD MILL AND GOT SAND INTO EYES. INJURY WAS NOT REPORTED BY EE UNTIL 02/16/05. EE DID NOT START MISSING TIME UNTIL 03/01/05. EE WENT TO DOCTOR AND DOCTOR FOUND OBJECT IN EYE

WHILE EMPLOYEE WAS USING DINGY TO REMOVE SPILLAGE OF SAND AT THE SILOS AND SHOVELING SAND, HE MOVED A WATER HOSE AND INJURED HIS LOWER BACK.

EMPLOYEE WAS SHOVELING SAND AND PULLED HIP. EE NOTIFIED COMPANY OF ACCIDENT ON 4/01/04.

EMPLOYEE WAS BUSTING LINER OUT OF BALL MILL WITH A SLEDGE HAMMER & PART OF LINER CAME LOOSE AND FELL ON HIM.

WHILE INSTALLING AN ELBOW, PULLED MUSCLE IN GROIN AREA.

EE CRAWLED UNDER SCALPING SCREEN TO TIGHTEN BELTWHEN HE DID THIS HE FELT A STING IN HIS BACK

THE EE BENT OVER, PICKING UP BOXES FILLED WITH BAGS THAT HAD TURNED OVER. INJURED BACK WHILE BENT OVER PICKING UP THE BOXES.

WORKING ON BAG WRAPPER, BENT DOWN TO FLOOR AND WHEN HE GOT UP RIGHT KNEE WENT OUT.

FIXING A BELT FOR BELT LINE WITH A HAMMER AND HIT SECONDE DIGIT ON LEFT HAND.

EMPLOYEE WAS INSERTING GLASS PIPETTE INTO PIPETTE PUMP AND IT SHATTERED CUTTING FINGER.

WHILE OPERATING A CUT OFF MACHINE AT THE SHOP A PIECE OF METAL FLEW INTO EYE.

HE WAS GRINDING A PIECE OF METAL WITH GRINDING MACHINE. A PIECE OF METAL FEW UP UNDER SAFETY GLASSES INTO LEFT EYE.

HE WAS HOLDING AN IMPACT WRENCH WHILE ANOTHER EE WAS HITTING A PIECE OF METAL. THEY WERE TRYING TO GET A BEARING BACK INTO PLACE. THE SLEDGE HAMMER TOP FELL OFF & HIT HIM IN THE HAND.

HE WAS WORKING ON GUARDS FOR THE END OF THE MILL. CLEANING SCRAPING GREASE AND OLD PAIN OFF OF THEM WITH SCRAPER. A PIECE OF SOMETHING WENT IN HIS LEFT EYE.

LOADING A PLATE OF STEEL INTO RACK USING HANDS TO GUIDE THE STEEL. FORKLIFT HIT ANOTHER PLATE AND IT BOUNCED ON HIS HAND.

EMPLOYEE WAS CUTTING INTO SILICONE SEALANT AND CUT AROUND CABLE WITH A POCKET KNIFE, AND CUT HISRIGHT HAND ABOVE THE FORE FINGER.

WAS WELDING ON THE HOPPER FOR THE DRYER & BURNEDBOTH EYES. IT WAS RAINING & WATER GOT ON FRONT OF SHIELD & REFLECTED AGAINST IT & BURNED BOTH EYES

WORKING AT CRUSHER ON A SCREEN AND CUTTING A BELT WITH A UTILITY KNIFE. KNIFE SLIPPED AND CUT HIS LEG.

HE WAS USING A FIRE HOSE TO CLEAN UNDER THE JAW CRUSHED HE RAISED UP AND HIT HIS BACK ON GUARD ULLEY FOR A BELT.

HPICKED UP PUMP MOTRO BASE AND HURT HIS BACK.

HE STEPPED OUT OF DRILL MACHINE ONTO TRACK, SLIPED BETWEEN MACHINE AND TRACK AND HURT KNEE.