Buscar en el registro

EE was using Metabo Grinder in an inverted position and cutting against the direction of the blades rotation. the blade kick backed, causing laceration to the left index finger.

EE looking in Gang Tool Box and the lid unexpectedly closed due to broken shocks and struck EE in the face impacting safety glasses and nose.

EE slipped on a face shield while exiting building.

hand caught between pipe being raised and structure

Injured employee was using a grinder to remove bolts in a unit. The grinder handle was preventing EE's reach from bolt and EE decided to remove the handle. Without a strong securement handle, the grinder kicked back and made contact with the employee's left middle finger, cutting through a glove. This resulted in a laceration requiring 3 stitches.

Operating light vehicle and struck a bollard resulting in a broken right radius.

Injured employee alleges knee pain when stepping on to grating that was on the ground in a laydown yard. The grating was placed on the ground to prevent slip hazard in muddy conditions.

Operator used air pressure to clean a line and opened valve before bleeding pressure. Air pressure burst a catch trap and oxalic acid with debris hit operator's face knocking safety glasses off.

EE was stepping over a small containment wall. They stepped over with left foot and stepped on a grading that was to large for the hole it was covering. It caused the grading to flip and the EE fell into the hole and ripped their pants and cut their right upper knee on the grading.

Slip and fall on ice.

fell down a set of stairs

Slip and fall leading to twisted ankle, possible fracture

Working foreman moving an agitator fell backwards after stepping onto a pallet and struck their neck on a metal I beam

wrench slipped, left hand suffered laceration on thumb.

ratchet slip while tightening hand railing on haul truck. 3 stitches to left thumb.

WSP employee entered a porta-potty supplied by the Mine site that was not secured or staked. After entering the porta-potty it tipped over causing the employee to be trapped and sprain ankle.

Docking lift gate level pulled in right index finger of EE into roller. Amputation of right index finger at 2nd knuckle.

Employee was walking in 6-8" of mud on a slope; EE slipped in the mud and EE's knee hit some concrete.

Broken rib resulting from slip and fall onto horizontal scaffolding bar. Thought it was just back pain and reported late.

Hearing shift. EE has loud hobbies and prior hearing problems but audiologist did not confirm not work related. EE works in various areas of the plant.

Sprain on right shoulder occurred when pulling on a strap to a sling bag and strap broke.

Employee had foreign material blow into their eye

Employee attempted to relocate a rattlesnake when the employee was bitten on the finger.

Employee was working with porta-power when reservoir failed causing debris to hit them in the arm.

Employee slipped on material that was dropped on the floor.

Worker slipped on an icy surface while conducting a walk around of equipment prior to starting work.

Miner slipped on an icy surface.

Miner slipped on an icy surface.

Employee walking across a rocky parking lot.

Miner tried to open a lid on a tote, lid was on too tight and would not come off.

Grating failed while walking across

Pushing plate on press

Employee was walking downstairs and rolled their ankle. Stairs and boots were checked and all were in good order.

Chemical insult to left eye.

Employee was opening their toolbox at time of incident.

Employee was filling up haul trucks and had to walk over a separations berm. As they were walking over the berm they slipped and caught themself before hitting the ground and stained their shoulder

Employee was pulling on a hose that was stuck and the hose broke free. When the hose broke free the employee fell backwards and hit the back of their head on a handrail causing a laceration.

Employee entered a sump that had what they believed to be only water to install a pump. The sump had residual caustic in the water. The employee did not put on their chemical resistant boots and water topped their boots causing chemical burns to their feet.

Removing bolts from a differential using a Hytorc and wrench. The wrench slipped off the bolt and struck the worker in the safety glasses. The safety glasses broke and caused a laceration to the right eyebrow. Worker received 10 sutures.

Employee was walking through area and slipped on material that had been spilt on floor. Employee fell and hit head.

Employee slipped on wet floor while stepping out of a sump falling and injuring back.

IW was cleaning preheater tubes using a hydroblaster flex lance. As they pulled the flex lance out of the tube, they mistakenly held pressure on the bypass (foot pedal), causing the lance to continue spraying. The whip hit them in the bicep, resulting in an injury.

While traveling downhill operator lost control of UTV on gravel causing the UTV to roll over.

Employee received stitches while removing a pump.

Maintenance worker walking through the mill pad with contractor. Contractor's pants caught on valve opening the valve and getting caustic in eyes

Employee was climbing down a scissor lift without gloves, when EE caught middle finger on a metal loops attached to the railing of the scissor lift.

Contributing conditions are unknown at the time. Employee could not pinpoint when accident took place and reported late.

Operator was lifting a heavy object and injured EE's right shoulder

Employee stepped on uneven ground causing EE to fall to the ground and sprain EE's ankle.

Employee was moving pallets and a pallet caught and twisted EE's hand resulting in wrist injury