Buscar en el registro

Massive rainfall in short period of time and pit pumps lost power from the storm causing water not to be able to be pumped out of the pit.

The employee was attempting to hook up a diesel fuel trailer to a diesel ride. While lining up the trailer hitch to the bumper of the ride the wooden prop that the trailer was resting on slipped, mashing EE's middle left finger between the hitch and the bumper causing a fracture and sutures

The employee was changing bits on a continuous miner. The employee struck the tip of left little finger with a hammer causing a fracture to the tip end.

The employee attempted to step off of a spare belt tailpiece when EE put EE's foot on the ground, EE twisted EE's right knee. The incident occurred 10/14/2019 but did not start missing time until 02/03/2020

The employee bent over to pick up a concrete block and felt pain in lower back. The employee did not start missing time until 9/26/19.

the employee was behind the bolter reaching for a piece of tie wire with right hand, had left hand on top of the operators deck canopy the bolter slightly moved, it hit a high spot on the bottom, causing it to raise up mashing left index finger between the canopy and the top causing a fracture.

Employee was opening the forks on the #3 lo trac. They lost grip on the forks causing the left ring and middle finger to get pinched.

Operator reeled up bolter cable while tramming, EE was standing on the wrong side the cable when the cable was torn down from the roof striking EE in the jaw. EE was shoved against the rib causing EE to strike head causing a laceration to head resulting in 3 staples.

An unplanned roof fall occurred at X-cut 17+00 outby #2 unit in primary escapeway, 2nd main south entry #7

The employee was raising the drill pot to the roof EE was attempting to put the drill steel in the pot, the steel got caught on the chuck, when it went into the chuck it had too much up pressure the steel caught EE's glove and struck EE's hand. The employee did not start missing work until 8-3-2019.

The employee was cutting a metal band that was around a pad of concrete blocks, the band broke loose cutting the employee in their right arm, resulting in to receive sutures.

The employee was cutting a piece of belt with a utility knife, the knife slipped and cut their upper right leg and they required sutures

The employee was pulling the miner water hose through the belt regulator when EE became tangled in the hose then EE felt a pop in EE's right knee

The employee was hooking up a cathead to a generator, employee was getting up off of the ground, their hand was on the edge of the hitch, their hand slipped on the side of the hitch it slid over a sharp burr causing a cut resulting in sutures

EE was picking up a 6"X20' section of waterline when EE felt a sharp pain in EE's lower back. EE was released to work on 03/12/2019, EE didn't begin losing time until 04/05/2018.

The contract employee had finished loading supplies on a man-trip when the employee bent down to lift lunch box. When employee lifted lunch box employee felt a pain in their back. The following were not a factor: rules, regulations, mining systems or equipment, training, protective clothing or devices. Attitude may have been a factor. Did not start to lose time until 3/2/2019.

EE was servicing man trips for the start of third shift, EE had just finished one and parked it in front of the bath house, when EE got out of the man trip and stepped on the gravel parking lot and twisted lower back. EE didn't start losing time until 03/18/2019.

The miner was riding on the 14 man Damacus man trip, the man trip ran over a skid located in the rides path. The ride came to an abrupt stop causing the miner to strike knee on the back of the seat in front of EE. The miner went to the ER and was released, the miner didn't start losing time until 01-04-2019.

EE was loading 5'resin in ee scoop bucket when ee felt a pain in left shoulder. EE had already loaded 20 bundles of glue before the incident.

The employee was bolting, had a bottom steel hung in the roof. The employee had 1' wrench in the drill pot and was raising it up to connect it with the steel, and caught left hand between the two, causing a laceration requiring sutures

The employee was operating the unit scoop. EE got out of the scoop for some unknown reason, the scoop started to roll. While trying to get back in the scoop, EE's right foot was caught between the coal rib and the scoop deck, resulting in a partial amputation of EE's right foot.

Our mantrip was coming off #5 road and was turning on to #4 road the mantrip did not make the turn, the operator slowed down to re adjust the turn, another mantrip came from behind and hit the back of our mantrip. The employee did not start missing work until 10/08/2018

Employee put too much pressure on the pinner steel causing it to bend, when the steel was rotated the steel hit the operator in the left eye. The employee was fully released to duty, and didn't start losing time until 9-24-2018. The employee suffered a hand injury at home after the eye injury and was off from 09-17-2018 until 9-21-2018.

There was an unplanned roof fall in the 1st east panel #1 on the #1 unit in the #1 entry at spad # 2+00

A battery scoop was being extracted from the 8-r crosscut with a battery ramcar. The employee was standing in the intersection and had turned to walk away and was struck with the ramcar, knocking the employee down. The employee did not start losing time until 8/31/2018

The employee was using a utility knife to cut some belt, when EE lost EE's balance and cut EE's leg

The employee was holding up a miner cable and waterline. The employee untied the waterline and it hit EE above the eye.

The employee was getting out of the ram car and felt some pain in left knee.

Pinner Steel was stuck in the pinner chuck, EE was trying to remove it when EE accidently bumped the rotation lever and the steel spun and hit EE's wrist

The miner cut left arm with a belt knife while cutting open a bulk bag of rock dust. The miner received 3 stitches to the left forearm.

Rock fall at spad 1700 1B supply road Approximately 70' by 20' by 8'.

The miner was loading the roof bolter when miner felt a sharp pain in right shoulder.

The miner received 1st and 2nd degree burns when ee removed a battery lift jack after the bottom pin was cut out with a cutting torch. The miner placed the jack on the mine floor and the hot oil sprayed on the miners hand. The miner was wearing gloves at the time of the accident.

While Roof bolting employee swung the boom with the canopy pressurized to the roof causing a rock to be dislodged and striking the operator in the left cheek (face). Resulting in 8 sutures to the affected area.

Was moving forks on lo-trac broke tip end of left ring finger and received 8 sutures

The employee smashed finger, received 7 sutures

Employee strained EE's back while operating a roof bolter