An unplanned roof fall occurred on 8/11/2026 at approx. 8:55pm. The fall measured 16' wide by 58' long by 7' high. The fall occurred on Mainline 10 Track at 10-47 crosscut, in the track entry. This fall is a continuation of the previous fall at 10-47 that occurred on 8/04/2026. The area was posted on all sides, dangered off, and will be cleaned up and bolted.
En todo el registro
- Incidentes totales
- 740,335
- De los cuales mortales
- 3,118
- Años en el registro
- 1983–2026
- Clasificaciones
- 20
Notifícame sobre esta búsqueda
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
864 registros en total
Mostrando 50 de 864Employee was checking the torque on the miner bolter when the employee pushed on the torque wrench and felt pain on the left side of the abdomen. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
An unplanned roof fall occurred on 8/11/2026 at approx. 12:14pm. The fall measured 16' wide by 20' long by 10' high. The fall occurred on Mainline 2 Track at 2-28 crosscut, in the intake on Connors Run Side. The area was posted on all sides, dangered off, and will not be cleaned up.
An unplanned roof fall occurred on 8/10/2026 at approx. 9:55am. The fall measured 16' wide by 50' long by 8' high. The fall occurred on Mainline 2 Track at 2-11 crosscut, track to belt. The area was posted on all sides, dangered off, and will not be cleaned up.
Employee was in the beltline hanging belt structure chain when a piece of rock fell from between the roof screen striking the employee in the bridge of the nose. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
IE was hanging pumpable crib bags and was struck by a falling rock in the right forearm. Injury was not the result of a training or compliance issue.
An unplanned roof fall occurred on 8/04/2026 at approx. 5:02am. The fall measured 16' wide by 65' long by 8' high. The fall occurred on Mainline 10 Track at 10-47 crosscut, in the track entry. The area was posted on all sides, dangered off, and will be cleaned up.
Employee was hosing around the tail roller of surface belt when employee tripped on a piece of grading injuring right knee. Employee continued to work until 08/11/2026 then sought treatment. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was walking back to the Miner when employee slipped and reached to stop from falling and caught small finger on rib strap. Mining systems was not a factor, compliance with rules and regulations was not a factor. PPE was a factor.
An unplanned roof fall occurred on 8/01/2026 at approx. 2:25pm. The fall measured 16' wide by 12' long by 8' high. The fall occurred in 6 North 4 East at 10 crosscut, track entry. The area was posted on all sides, dangered off, and will not be cleaned up.
Employee was standing on the back of the miner getting a roof strap when the operator lowered the boom of the miner down on top of the employees foot. The miner operator did not see the employee prior to lowering the boom. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was repairing airlock doors when the top beam fell, striking employee in the right forearm. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was repairing airlock doors when the top beam fell, striking employee in the left wrist and hand. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
An unplanned roof fall occurred on 7/27/2026 at 2:35pm. The fall measured 16' wide by 85' long by 8' high. The fall occurred in 5 North Mains #4 Entry at 69 to 70xc. The area was posted on all sides, dangered off, and will not be cleaned up.
Employee was mounting a dust box on CM Bolter station when dust box dropped and landed on employees finger. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was standing on the back of miner getting a roof strap when the operator did not see the employee and lowered the boom of the miner down on top of the employee's foot. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee injured right biceps while moving a piece of large rock. They worked unrestricted until 8/2/26, began missing work 8/3/26. This incident did not involve any aspect of compliance with rules and regulations; mine equipment or mining system; job skills and miner proficiency, training and attitude; or protective items relating to clothing, or protective devices on equipment.
An unplanned roof fall occurred on 7/21/2026 at 1:40am. The fall measured 16' wide by 25' long by 10' high. The fall occurred on Mainline 13 Track at 13-41 crosscut, track to belt. The area was posted on all sides, dangered off, and will not be cleaned up.
Employee was bolting off the miner when reached up to grab a roof strap and struck right elbow on the bolting station. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
IE was taking a break on tight side of belt to drink water. A rock fell and hit IE in the left knee. Injury was not the result of a training or compliance issue.
Employee was driving a mantrip when received a call on the radio. Employee looked down to answer radio when they struck their head on a low hanging bolt. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
An unplanned roof fall occurred on 7/16/2026 at 2:25pm. The fall measured 16' wide by 40' long by 8' high. The fall occurred on Mainline 3 Track at 3-11 crosscut, track to belt. The area was posted on all sides, dangered off, and will be cleaned up.
An unplanned roof fall occurred on 7/15/2026 at 4:10am. The fall measured 16' wide by 30' long by 8' high. The fall occurred on Mainline 5 Track at 5-45 crosscut, track to belt. The area was posted on all sides, dangered off, and will be cleaned up.
An unplanned roof fall occurred on 7/14/2026 at 4:50pm. the fall measured 16' wide by 25' long by 10' high. The fall occurred om Mainline 14 Track at 14-24 crosscut, track to neutral. The area was posted on all sides and dangered off.
Employee was rib pinning when a rock fell from the top, hitting the vent tubes then the rock and vent tubes knocked the employee to the ground. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was rib pinning when a rock fell from the top and struck employee in the hard hat and left arm. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
An unplanned roof fall occurred on 7/07/2026 at 12:48pm. The fall measured 16' wide by 40' long by 10' high. The fall occurred on Mainline 10 Track at 10-21 crosscut, track to neutral. The area was posted on all sides, dangered off, and will be cleaned up.
An unplanned roof fall occurred on 7/05/2026 at 8:51am. The fall measured 16' wide by 50' long and 8' high. The fall occurred on Mainline 3 Track at 3-06 crosscut. The area was posted on all sides, dangered off, and will be cleaned up.
An unplanned roof fall occurred on 7/02/2026 at 5:55pm. The fall measured 16' wide by 45' long and 10' high. The fall occurred on Mainline 16 Track at 16-31 crosscut. The area was posted on all sides, dangered off, and will be cleaned up.
Employee was welding when the welder stopped working, employee raised hood and received flash burns when welder suddenly arc. Mining systems was not a factor, compliance with rules and regulations was not a factor, PPE was a factor.
Employee was using jack hammer when the jack hammer tip slipped off rock and landed on top of employee's right foot. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was loading vent tubes and while turning to load another vent tube, employee felt pain in the middle of EE's back. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was building a wall and came into contact with J-Tech pumpable crib material. Employee continued to work until 07/10/2026 and then sought treatment. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
An unplanned roof fall occurred on 6/29/2026 at 7:15pm. The fall measured 16' wide by 40' long and 8' high. The fall occurred on Mainline 3 Belt at 3-32 crosscut. The area was posted on all sides, dangered off and will be cleaned up.
Employee was pushing bolt into bolt hole when employee felt pinch and pain in left shoulder. Employee continued to work until 07/07/2026 then sought treatment. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was shoveling the 9 Belt Take-up when right hand contacted the Take-up rail resulting in a cut to EE's hand. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was rib pinning when a rock fell from the top and struck the employee in the hard hat and on both shoulders. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was placing tubes over the bologna skin when EE felt pain in lower back. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was center bolting when rock fell from the top and struck employee in top of hard hat. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was pushing roof bolt to the top when the roof bolt bent and pinched EE's finger between bolt plate and strap jack. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was exiting a Loader and slipped and landed on the Loader injuring their groin area. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor. The employee continued to work unrestricted until 7-22-26 then sought treatment.
Employee was installing the door back on the Scoop kitchen when the door slipped from its hinges and pinched the employee's finger. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was pulling old cable from the beltline when a rock fell from the top and struck employee on the hard hat. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was placing a tire back onto the scoop when the come-along chain being used to assist with the installation broke, causing the tire to fall onto the employee's legs. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was placing the tire back onto the scoop when the tire slipped off the axle and landed on the employee's foot and ankle. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was stepping off the bumper of the miner when EE stepped onto a large piece of coal, causing EE's ankle to roll.
Employee was Z-Drilling when dropping steels, the steels came apart and fell on employees finger. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
IE was helping the crew supply the miner. EE slipped on a channel plate while standing on the bumper of the miner and cut EE's hand trying to catch EE's balance. Injury was not the result of a training or compliance issue.
Employee was shoveling on the beltline, when felt pain in shoulder. PPE was not a factor, mining systems was not a factor, compliance with rules and regulations was not a factor.
Employee was changing out draw bar on motor when EE pinched EE's finger. Mining systems was not a factor, compliance with rules and regulations was not a factor. PPE was a factor.