Buscar en el registro

HE HIT A POT HOLE WHILE DRIVING A FUEL TRUCK. HIS TRUCK HIT THE INSIDE OF THE CAB ROOF PUSHING DOWN ON HIS NECK.

EE BROKE THROUGH A PALLET WHILELOADING IT AND FELL TO THE GROUND HURTING HIS RIBS. WOODEN PALLET DECK BOARD WAS DEFECTIVE (WET AND UNSEASONED HARDWOOD). DEFECT COULD NOT BE DETECTED BY OPERATO R THROUGH NORMAL VISUAL INSPECTION.

EE SLIPPED ON A ROCK WHILE CHECKING FEEDERS IN THE TUNNEL. FROZEN ROCK HAD DISLODGED ONTO TUNNEL FLOOR. LIGHTING WAS INADEQUATE FOR OPERATOR TO SEE ROCK.

AS EE REACHED TO TURN VALVE OFF AFTER USING AIR HOSE, FLEXIBLE END OF HOSE HIT HIM IN RIGHT EYE.

EE WAS HOOKING UP 2 WAY RADIO BATTERY TO BATTERY TERMINAL IN CAB OF A CAT 988A FRONT END LOADER 1972 WORKING IN CONFINED AREA BATTERY EXPLODED IN HIS FACE AND CAUSED EYE INJURY.

WHILE LOADING A TRUCK EMPLOYEE REACHED TO REPOSITION A BAG WHICH WAS FALLING OFF THE PALLET THIS CAUSED A BREAK IN H IS ROUTINE & HE WAS NOT IN THE RIGHT POSITION TO RECEIVE THE NEXT BAG OFF T HE CONVEYOR

WHEN KNIFE WAS RETURNED TO POUCH, LOCK HIT AN OBJECT AND BLADE WAS RELEASED. KNIFE WAS PLACED IN POUCH UPSIDE DOWN. EMPLOYEE REACHED ACROSS POUCH AND WHEN ARM WAS BROUGHT BACK, EMPLOYEE'S RIGH T THUMB CAUGHT ON THE BLADE. THUMB WAS CUT OPEN EMPLOYEE REQUIRED FIVE STITCHES.

WASHING DOWN ENTRANCE TO PLANT WHEN OBJECT FLEW INTO LEFT EYE.

PIECE OF SLAG/METAL RICOCHETED OFF INSIDE OF SHIELD INTO RIGHT EYE.

EE WAS PULLING CARDBOARD OFF A CARTON OF PAPER BAGS. A PIECE OF CARDBOARD HIT HIS LEFT EYE WHICH CAUSED A SCRATCH ON THE EYE WITH BLURRED VISION.

EMPLOYEE SLIPPED ON A ICY SPOT, HIT RIB CAGE ON THE SIDE OF A WELD TRUCK.

WHILE CUTTING CHUTE OUT OF STONE ELEVATOR WITH DIRT & RUST IN IT EMPL EXPERIENCED SLAG IN EYE.

BURNING SHAFT AT METAL DUMP SPARKS FLEW IN EYE

WHILE MOVING CARTON OF PAPER BOX SHIFTED IN TRYING TO KEEP BOX FROM DROPPING EMPL GRABBED IT & TWISTED WRIST.

WHILE WELDING ON THE GRIZZLY SEPERATOR IN A CONFINED AREA,EMPLOEYE RECEIVED A WELDERS FLASH.

WIND BLEW PIECE OF SAND INTO LEFT EYE OF EE.

EMPLOYEE SLIPPED WHILE CLIMBING ONTO TRUCK SPRAINED RT KNEE REQUIRING SPLINT

EMPLOYEE WAS COVERING A TRAILER AND STEPPED BACK INTO A HOLE IN THE TRAILER.

WHILE CHIPPING SAG OFF JAW CRUSHER, PIECE OF SLAG FLEW INTO RIGHT EYE.

EMPLOYEE TRIED TO UNJAM SCREW. WHEN FREED, THE SCREW TURNED AND CAUGHT EMPLOYEE'S THUMB.

EMPLOYEE JUMPED UP ON SCREW BOX AND HIT HEAD ON DUST COLLECTOR.

EXPERIENCED PAIN IN BACK WHILE PLACING A BAG ON A PALLET.

TURNED WRONG WHILE LOADING TRUCK AND HURT BACK.

EMPL WAS CLEANING OUT SPILL SCREW AT #3 STATION TURNED HOSE FROM HI VAC & HAD PAIN IN BACK.

WHILE GRABBING PALLET OFF OF STACK OF PALLETS ON TRUCK HE SWUNG PALLET AROUND THUS HURTING HIS BACK

EE CLIMBED THRU THE WINDOW TO UNLOCK DOOR TO WELD SHOP. SLIPPED ON WELDING TABLE AND HIT WINDOW WITH RIGHT ELBOW.

I.NAME LIFTING OAK BLOCKS FROM UNDER MACHINE AND STACKING THEM,INJURED GROIN.

LOADING TRUCKS

WHILE CUTTING STRAPS OFF A BUNDLE OF BAGS, CUT INDEX FINGER ON RIGHT HAND.

I.NAME CAME DOWN STEPS BY PRIMARY CRUSHER BOTTOM DOOR & FELL ON ICY PAVEMENT.

WHILE PUTTING BOLT IN #335 SCREW, I.NAME PLACED HIS FINGER IN THE BOLT HOLE TO SEE IF IT WAS LINED UP.

WHILE SHOVELING UNDER BELT, HE TURNED THE WRONG WAY AND SPRAINED HIS BACK.

I NAME WAS CLOSING A SLIDE ON #3 CC CHUTE WITH A BAR THE BAR SLIPPED OFF OF THE SLIDE & HIS HAND WAS CUT ON A BEAM

EE WAS THROWING EMPTY BAGS UP ON A RACK, HIS HAND SLIPPED AND WAS PINCHED BETWEEN BAGS AND A TRAY.

MOVING PALLETS ON TRUCK LIFTING BAGS

EMPLOYEE STRAINED RIGHT WRIST WHILE LOADING BAGS OF STONE ONTO PALLETS.

EMPLOYEE , WHEN GETTING OUT OF TRUCK, STEPED ON SCALE BEAM. HIS FOOT SLIPPED, HE FELL, HITTING HIS KNEE ON THE BEAM. (IT WAS RAINING AT THE TIME OF THE ACCIDENT.)

WHILE WALKING IN PACKING STATION EMPL TRIPPED & FELL ON UTILITY KNIFE HANGING ON PANEL BOX.

WHILE TRYING TO PUT ROCK THROUG JAW CRUSHER EMP FINGER WAS CAUGHT IN CHAIN JIOST.

WHEN PULLING WIRES FROM CONTROL PANEL, WIRE SLIPPED, CAUSING CONTACT WITH SHARP EDGE OF BOX.

ON HIS FIRST DAY OF WORK,(NAME)WAS LOADING BAGS OF STONE ON PALLETS ON THE BACK OF A TRUCK.YHE TRUCK WAS RUNNING WHILE BEING LOADED.HE WAS WORKING CLOSE TO THE TRUCK EXHAUST AND PASSED OUT.

EMPL. WAS LOADING PALLETS ON TRUCK, TRUCK DRIVER, NOT AN EMPLOYEE, WAS HOLDING PALLET JACK HANDLE OUT OF WAY. DRIVER RELEASED PALLET JACK HANDLE TO CATCH A FALLING BAG. HANDLE STRUCK EMPL O N THE BACK.

EMP WAS ENTERIN1 #1A PACKING MACHINE AND AT TOP OF THE STAIRWELL HE HIT HIS HELMT ON A BEAM. AS HE MADE CONTACT IT KNOCKED HIS HAT OFF AND HE RAISED UP TO CATCH HIS BALANCE AND STRUCK HIS HEAD AND NOSE 3

WHILE DISMANTLI3G THE SECONDARY CRUSHER, HE WAS HITTING A SLUGGING WRENCH WITH A SLEDGE HAMMER AND THE WRENCH BOUNCED UP OFF THE NUT AND HIT HIM ON THE FOREHEAD

WHILE REPAIRING3BODY ON TEREX TRUCK, I,NAME HIT STEEL PLATE WITH HAMMER AND A CHIP CAME OFF OF THE PLATE OR HAMMER AND WENT INTO HIS NECK.

FELL DOWN STEPS3BY #3 QUARRY SILO.

I.NAME & I.NAME3WERE ATTEMPTING TO STRAIGHTEN OUT FLEX CONVEYOR BY LIFTING PORTION WHERE BEND WAS IN BELT & AS THEY MOVED BELT THE LOWER PORTION OF T HE BELT WHICH HAS THE MOTOR & WIRE B OX HIT I.NAMES 8HIN & CUT SKIN. RT LEG & SKIN COVERING TIBIA WAS CUT.

WHILE USING A 334 TON RATCHET BLOCK TO BEND SHEET METAL FOR A BELT CONVEYOR GUARD THE HOOK SLIPPED OFF THE EDGE OF THE WORK BENCH

WHILE CLEANING 6P AROUNG #4 ELEVATOR HE AND ANOTHER WORKER USING LD5P LOADER TO TAKE AWAY STONE THAT HAS BEEN PILED UP.MACHINE WAS LEFT RUNNING WHILE ATTENDED AND WHEELS NOT BLOCKED.

EE WAS HAMMERIN1 SCREEN TENSIONING WEDGE ON 1 SCREEN WHEN THE HAMMER DEFLECTED OFF AND HIT HIS FINGER THE SCREEN S LOWER DECK IS VERY DIFFICULT TO HIT THE WEDGES SQUARELY BECAUSE THE HOPPER I