Buscar en el registro

EMP STATES HE W5S WALKING NEAR THE UNLOADING TOWER WHEN HE STUMBLED AND TURNED HIS ANKLE

EMP STATES HE W5S MOVING A SCAFFOLD ON THE KILN FLOOR WHEN A BOARD FELL ON HIS FOOT

EE WAS REMOVING3COVERS FROM #5 COAL SCREW. THE EE LOST HIS BALANCE & FELL 10'-12'. THE EE WAS NOT WEARING A SAFETY BELT. A LACERATION TO HIS HEAD & A BROKEN THUMB WERE SUSTAINED.

EMP WAS INJURED3WHEN HE DROVE A TRUCK INTO THE QUARRY PORTAL WHEN THE DUMP BODY WAS LEFT UP

EMP STATES HE W5S WWELDING WHEN A PIECE OF HOT SLAG FLEW UP INTO THE CORNER OF HIS EYE

EMP STATES HE W5S WORKING IN THE COMPRESSOR HOUSE WHEN A COUPLING CAME LOOSE WHICH HE CAUGHT TO PROTECT HIS FOOT

EMP STATES HE W5S TRYING TO STABILIZE A BARREL OF BALLS WHEN A SECOND BARREL FELL ON HIS RIGHT LEG

EMPLOYEE STATES3SHE WAS WELDING A PLATE WHEN IT FELL OFF A TABLE ON TO HER RIGHT FOOT.

EMPLOYEE STATES3HE HOPPED DOWN OFF A CONVEYOR BELT AND TURNED HIS LEFT FOOT.

EMPLOYEE STATES3HE TWISTED HIS ANKLE WHILE CARRYING A METAL PLATE ALONG #1 BELT.

EMPLOYEE STATES3HE BURNNED HIS HAND WHEN HEPLACED IT ON A PIECE OF HOT METAL UNDER A TRUCK.

EMPLOYEE WAS ST5NDING ON A BEAM WELDING, THE POSITION WAS AWKWARD AND HE WAS WEARING A SAFETY BELT, WHEN THE JOB WAS FINISHED, HE REMARKED TO THE MAN HE WAS WORKING WITH, HIS BACK HURTS. THAT WAS THE END OF3THE REPORT UNTIL 2-10-86 WHEN EMPLOYEE ENTERED THE HOSPITAL.

EMPLOYEE STATES3HE WAS OPENING SILO GATE #8 WHEN THE RATCHET SLIPPED HITTING HIM ON THE HEAD AT THE HAIR LINE.

EMPLOYEE STATES3SHE WAS USING A LOADED WHEELBARRON WHEN IT TIPPED OVER ON HER KNEE.

EMPLOYEE WAS REPLACING HEADLINERS IN #1 FINISH MILL. WHILE MANEUVERING A HEADLINER INTO POSITION, EMPLOYEE TWISTED HIS KNEE, FEELING A STRAIN.

EMPLOYEE STATES3SHE PINCHED HER RIGHT HAND WHEN A SAND DOOR SLAMMED DOWN ON HER .

EMPLOYEE STATES3HE WAS WORKING IN #2 COOLER WHEN SOMETHING GOT IN HIS EYE.

EMPLOYEE STATES3HE HURT HIS KNEE WHEN HE JUMPED DOWN OUT OF THE REED DRILL.

EMPLOYEE STATES3SHE GOT SOMETHING IN HER EYE WHILE DOING SOME GRINDING.

EMPLOYEE WAS REPLACING A FLAP GATE IN THE F-K PUMP WHEN I T FELL ON HIS LEFT RING FINGER.

EMPLOYEE STATES3HE HURT HIS BACK WHILE CUTTING AND LIFTING A PIECE OF IRON PLATE.

EMPLOYEE WAS ATTEMPTING TO ALIGN HOIST CYLINDER ON HAUL TRUCK. HE BRACED HIS HEAD AGAINST THE T RUCK BED AND TRIED TO MUSCLE HTE SYLINDER UPRIGHT-HURTING HIS NECK.

EMPLOYEE WAS USING A 51/2\RATCHET TO CLOSE A FEEDER GATE IN #9 SILO WHEN THE BOLT HE WAS TURNING BRAKE OFF AND HE FELL BACKWARD TO THE FLOOR.

EMPLOYEE STATES3HE STRAINED HIS BACK WHILE LIFTING A HYDRAULIC CYLINDER ON A TRUCK.

EMP WAS CLEANING AN AREA ON THE 2ND FLOOR OF THE MILL BUILDING NEAR THE #1 FINISH MILL REJECT SCREW HE AND ANOTHER EMP WERE RAISING DUMPSTER THROUGH THE CRANE HATCH TO REMOVE THE SPILL THE INJURED EMPLOYEE WAS USING THE HOIST CABLE AS A GUIDE WHEN THE 2ND DIGIT OF THE RIGHT HAND CAUGHT IN THE PULLEY

EMP STATES HE C6T HIS FINGER WHILE TAKING A H OSE LOOSE FROM A TRUCK

WHILE GOING DOW3 SPIRAL STAIR I NAME BUMPED HIS HEAD ON THE STEPS ABOVE JAMMING HIS NECK I NAME HAD SURGERY ON 1 2 86 HE WORKED DURING THE INTERIM

EMPLOYEE STATES3HE WAS DRIVING A HAUL TRUCK WHEN THE THROTTLE STUCK AND HE HIT THE TUNNEL WALL AS HE ATTEMPTED TO BRING THE TRUCK TO A STOP.

THE EMPLOYEE WAS IN THE PROCESS OF REPLACING A BEARING ON THE IMPACTOR WHEN THE BEARING SLIPPED AND FELL ON HIS RIGHT IDEX FINGER.

THE EMPLOYEE BEGAN HIS REGULAR SCHEDULED SHIFT 8-4 PM PERFORMING ROUTINE UTILITY OPERATOR WORK WHILE WORKING IN THE COAL TUNNEL THE EMPLOYEE OVER HEATED DURING HIS BREAK AT 1000 AM, THE EMPLOY EE FAINTED IN THE BREAK ROOM.

EMPLOYEE WAS IN THE PROCESS OF INSTALLING A C-60 COMPRESSOR WHEN HE PINCHED HIS HAND ON A LIFTING BAR CHAIN WHEN THE CHAIN SLIPPED HIS HAND WAS PINCHED BETWEEN THE BAR AND AN EYE BOLT.

EMPLOYEE WAS SHOVELING MATERIAL FROM BENEATH THE TAIL PULLEY OF NOUMBER 11 BELT. THE SHOVEL STRUCK THE TAIL PULLEY, CAUSING THE HANDLE TO STRIKE HIM IN THE FACE.

EMPLOYEE STATES3HE WAS WELDING WHEN HE RECEIVED FLASHBURN.

EMPLOYEE STATES3HE WAS PUMPING CEMENT WHEN THE SILO FLUSHED & CEMENT DUST FLEW INTO HIS EYES

EMPLOYEE STATES3HE PULLED A GROIN MUSCLE WHILE TEARING DOWN A PUMP & MOVING SOME PARTS IN OLD SILOS

EMPLOYEE WAS TA5ING A SAMPLE FROM #1 FINISH MILL WSHEN DUST BLEW INTO EYES

EMPLOYEE WAS WORKING ONA GAS VALVE LEADING INTO THE MILL BUILDING. THE VALVE WAS STUCK AND HARD TO TURN. THE EMPLOYEE WAS BENT OVER TRYING TO TRURN THE VALVE WHEN EMPLOYEE FELT A PAIN IN THE L OWER BACK.

EMPLOYEE STAES 2E RT ELBOW POLPPED WHEN HE WAS PUTTING AN 0 RING ON THE BASXE OF AN OIL FILTER

EMPLOYEE STATES3HE HURT HIS SHOULDER WHEN HE WAS CLIMBING JOUT OF THE REED DRILL

EMPLOYEE STATES3HE STEPPED DOWN FROM THE LOCOMOTIVE & HURT HIS FOOT

EMPLOYEE STATES3HE WAS WORKING IN THE SILOS SHOVELING MATERIAL WHEN DUST BLEW IN HIS EYES

EMPLOYEE WAS INSTALLING A SPROCKETR ON WOBBLER FEEDER-HE WAS BUMPING SPROCKET WITH A SLEDGE HAMMER TO ALIGN THE KEY WAY - WHILE STRIKING THE SPROCKET A SLIVER OF METAL FLEW OFF AND ENTERED IN TO HIS RIGHT FOREARM.

EMPLOYEE WAS CH5NGING BLANKS IN THE SILOS WHEN HE STATES HE PULLED A BACK MUSCLE

EMPLOYEE WAS DESCENDING FROM A DOZER WHEN HE TWISTED HIS ANKLE.

EMPLOYEE STATES3HE WAS STRUCK IN THE FACE BY A WINCH HANDLE AT THE BARGE LOADING DOCK

EMPLOYEE WAS INSTALLING FABRICATED SHEET METAL I LINERS IN THE #1 BAGHOUSE FAN COMPARETMENT. THE 7\X301/2"X3/8" FABRICATED SHEET METAL PLATE SLIPPED, STRIKING THE EMPLOYEE IN THE GROIN AREA.

EMPLOYEE WAS WELDING ON 1 COAL MILL PIPE WITHOUT A WELDING HERO. THE EMPLOYEE WAS WEARING WELDING GOGGLES WITHOUT ANY FACE PROTECTION AND RECIEVED FLASH BURNS TO HIS FACE.

EMPLOYEE CUT HI8 LEFT KNUCKLE WHILE PUTTING STUDS ON A WHEEL WHEN WRENCH SLIPPED

EMPLOYEE WAS ST9PPING OFF A DOZER WHEN HE CUT HIS FINGER ON THE HINGE OF A TOOL BOX

EMPLOYEE WAS SH2VELING HEAVY WET MATERIAL AT THE CRUSHER WHEN HIS BACK STARTED TO HURT HIM