Buscar en el registro

PICKING UP IMPACT WRENCH (15#), TURNED TOWARD LINE WITH IT AND FELT MUSCLE PULL.

THE EMPLOYEE WAS ON HIS HANDS AND KNEES CUTTING A PATCH FOR A HEAVY GUAGE PLASTIC LINER (60 MI). THE UTILITY KNIFE SLIPPED FROM THE MATERIAL AND CUT HIS LOWER RIGHT THIGH. THE LACERATION REQUI RED STITCHES. THIS CUTTING PROCEDURE HAS BEEN PERFORMED MANY TIMES WITHOUT AN INCIDENT.

A 12 INCH DRISCO PIPE GOT HUNG ON AN ELBOW. WHEN IT CAME LOOSE IT FLEW PAST EMPLOYEE AND HIT HIM AS IT RECOILED. THE MINE OPERATOR BECAME AWARE ON 3-1-95 THAT THE INJURY CAUSED RESTRICTED WORK ACTIVITY ON 2-14-95.

REMOVING A HOSE FROM A TRAILER--THE JACK BROKE AND TRAILER FELL ON FOOT.

EE HAD BEEN WASHING GREASE FROM LARGE METAL SWING CASE COVER AND WAS WASHING HIS BOOTS BEFORE GOING TO BREAK. HE APPARENTLY PLACED THE END OF THE WAND TO CLOSE TO HIS RUBBER BOOTS AND THE COMB INATION OF PRESSURE AND HEAT TORE THRU THE BOOT ALLOWING HOT WATER AND STEAM TO BURN HIS RIGHT ANKLE.

PICKING UP TRUNION PIN TO PUT IN THE 2550, MASHED FINGER.

FOLLOWING COMPLETION OF TRANSFERRING MATERIAL FROM THE STORAGE DOME, INJURED APPARENTLY ENTERED THE DOME ALONE. HIS BODY WAS LATER DISCOVERED IN THE DOME. HE HAD APPARENTLY BEEN BURIED BY TH E MATERIAL STORED IN THE DOME.

EMPLOYEE WAS HOLDING SPUD WRENCH ON THE HEAD OF A BOLT THAT WAS HOLDING TWO PIPE FLANGES TOGETHER AS COWORKER WAS TIGHTENING OUT ON THE BOLT WITH AIR POWERED IMPACT WRENCH THE SPUD WRENCH SLIP PED OF THE BOLT AS IT WAS BEING TURNED BY IMPACT WRENCH CAUSING SPUD WRENCH TO FLIP BACK HITTING EMPLOYEE

EMPLOYEE WAS USING A 2 1/2" IMPACT WRENCH TO REMOVE BOLTS FROM HOIST CABLE ON DRAGLINE. SOCKET WAS ATTACHED TO IMPACT WRENCH WITH A PIECE OF THREADED ROD AND A NUT ON EACH END. SOCKET SLIPP ED OFF OF BOLT AND THE END OF THE THREADED ROD CUT EMPLOYEES ARM. LACERATION REQUIRED FOUR STITCHES. EMPLOYEE RETURNED TO THE SAME JOB WITHOUT ANY LOST TIME.

HIT TRACK PAD WITH A HAMMER & A PIECE OF MET AL CAME OFF & HIT RT LEG

CLEANING WHEEL ON MILL - MILL WAS JACK UP SO THAT WHEEL COULD BE TURNED TO CLEAN. JACK SLIPED CRUSHING RIGHT INDEX FINGER. HE WAS TOLD NOT TO PUT HIS HAND OR FINGERS UNDER IT.

LEFT HAND WAS IN DOOR JAM WENT ACROSS A RUT & DOOR SHUT ON FINGERS

WORKING TO UNPLUG HOT CYCLONE. HOT ROCK CAM EOUT MANWAY.

CHECKING GENERATORS IN E HOUSE METER SLIPPED & THERE WAS A FLASH OF FIRE

USING SPUD WRENCH.

EMPLOYEE WAS DISCONNECTING COMBINATION HOSE FROM SULFURIC ACID TANK EAR WHEN AIR PRESSURE FORCED AND TO EXCAPE IN MUST FORM WHICH WENT UPUNDER HIS ACID SAFETY LOAD AND BURNED HIS FALL AROUND H IS EYES NOSE, FOREHEAD, AND EYE LIDS.

INJURED BENT OVER TO PICK UP A CARBURETOR FROM THE SHOP FLOOR. HE GOT A CATCH IN THE LOWER BACK AS HE STRAINTENED UP.

FEED PLANT CLEANS PLANT EQUIP IN MILL. LOAD TRUCK.

EE WAS SHOVELING HOT ROCK OUT OF CALCINER. HE WAS APPARENTLY STANDING ON HOT FRAGMEWNTS AND WHEN HE REALIZED HIS BOOTS WERE HOT HE WENT OUTSIDE AND FLUSHED THEM WITH WATER. HE DID NOT REPROT H IS FEET BEING BURNED UNTIL 1-13-94. WHEN ASKED WHY HE DID NOT REDPORT INJURY ON 1-5-94, HE SAID HE DID NOT KNOW HIS FEET WERE BURNED AT THAT TIME.

CLOSING FEED GATES. HAD TO STRAIN TO LOCK GATES.

STANDING IN A VESSEL THAT HAD BEEN PAINTED 20-30 MINUTES PRIOR. SECOND EMPLOYEE BEGAN TO GRIND AND SPARK CAUSED PAINT VAPORS TO IGNITE.

DISCONNECTING ROLLER USIGN PRYBAR. PRYED ROLLER UP AND WHEN ROLELR RELEASED THE PRY BAR CAME DOWN AND CRUSHED FINGE RBETWEEN METAL BEMA. JERKED HAND OUT.

PUTTING BELT GUARD ON, GUARD SLIPPED STRIKING EMPLOYEE.

EE STEPPED OFF OF THE TRACKMOBILE ONTO A RISE IN THE BLACKTOP AND TWISTED HIS RIGHT ANKLE.

BENT DOWN TO MOVE GUARD - HIT HEAD & SHOULDER ON VALVE.

ANOTHER EE WAS USING A 3/4 IMPACT WRENCH. THE IMPACT MALFUNCTIONED AND SPUN THE NUT OFF CAUSING IT TO FLY OFF.

PROPREL RIVIM ROLLED & TRAPED LEFT FOOT NEXT TO PROPREL WALL BREAKING EMPLOYEE'S ANKLE.

PICKED UP A 3 INCH SHAFT AND SET IT DOWN. EMPLOYEE IN A SQUATTING POSITION TO PUT BOLTS ON. WENT TO STAND UP AND FELT SEVERE PAIN IN BACK.

WORKING IN MILL-FLOTATION AREA EYES BEGAN TO BURN AND WATER.

WORKING IN MILL AREA- EYES BEGAN TO BURN AND WATER.

WORKING IN MILL AREA AND EYES BEGAN TO BURN AND WATER BY THE END OF SHIFT UNABLE TO WORK.

WORKING IN MILL AREA EYES BEGAN TO BURN AND WATER.

WHEN COMING OUT OF THE HOLE AND BREAKING DRILL PIPE LOOSE, CABLE BROKE ON TONGLINE, HITTING HIM IN UPPER CHEST AND KNOCKING HIM DOWN.

CLIMBING UP ON CONEX, SLIPPED ON GRATING AND HIT LEFT KNEE. LACERATION TO LEFT KNEE.

MOVING RAILS USING RAIL CLAMP AND BACKHOE. WHEN LIFTED RAIL UP WITH BACKHOE, RAIL WAS CAUGHT AT ONE END AND IT SNAPPED BACK AND STRUCK WORKER WHO WAS STANDING APPROXIMATELY 10 FEET AWAY.

BENT DOWN TO INVESTIGATE A NOISE. HARD HAT FELL OFF. HIT HEAD ON SHARP EDGE.

EXCESSIVE WORK PAST 3 WEEKS, HAD A BACK ACHE. WOKE UP 3/30 WITH PAIN IN LEFT HIP.

PULLING CABLE, LOST FOOTING IN LOOSE SAND AND FELL INTO CABLE.

CHANGING SCALPING SCREEN AND MASHING LEFT MIDDLE FINGER RESULTING IN A FRACTURE.

USING IMPACT WRENCH, SAND BLEW IN FACE.

CUTTING METAL OVER HEAD PIECE OF SLAG FELL INTO LEFT EYE.

EE WAS HELPING LIFT THE DRILL POWER CABLE. THIS CABLE MUST BE LIFTED ABOVE YOUR HEAD IN ORDER TO ANCHOR IT TO THE MINE ROOF.

KNOCKING A BUCKET WHEEL TRACK PIN OUT WITH A 2" X 5" BAR. PIN CAME OUT AND HIT FINGER. AREA HEALED BUT BEGAN TO HAVE PROBLEMS 4/5/93. REFERRED TO DR. FOR REMOVAL OF CYST.

STANDING BY WATER VALVE, WENT TO TURN OFF TWISTED R KNEE

HOOKING TRACTOR TO DISK,FINGER CAUGHT BETWEEN CENTER ARM AND DISK.

TIGHTENIGN A PLUG ON D11 ML 3/4 RACHET BROKE. RIGHT THUMB HIT BETWEENR ACHET AND BLADE ARM.

CUTTING DUMP CABLE.HOT CABLE CAME BACK AND STRUCK LEFT ARM BURNING IT.

STANDING NEXT TO BELT LINE. ANOTHER EMPLOYEE WAS BACKING UP IN A TRUCK. HIT HIM IN KNEE AND CHEST.

BAGGING PRODUCT FAN BLEW MATERIAL OFF TABLE IN EYE

CHANGING OUT PULLEY ON BUCKETWHEEL CLIMBED SCAFFOLDING MUD ON BOOTS SLIPPED & FELL APPROX 8FT 2-3 MINUTES LOSS OF CONSCIOUSNESS