Buscar en el registro

Miner was wearing a welding helmet, walked under a steel structure and hit his head. Resulting in staples to the head. No lost time.

the miner operating a Genie S-85 manlift. While he was moving it from one location to another the front wheel fell into a washout in the roadway. Which caused him to fall in the basket injuring his left shin.

While cutting the head of a bolt with a grinder, when the bolt caught and was sent flying into his face/tooth

While operating loader, he came across some drill bits that he moved by hand, while moving them he felt a pain in his left hip.

Employee was welding, building a chute for the crusher when the metal started to get away from him, in his attempt to save it he pulled a muscle in his lower abdomen.

Employee was dragging a length of 2" sch40 steel pipe into the DOT shop to be welded. While employee was dragging the pipe into the shop he lost his footing and fell backwards. While falling backwards he put his right hand out to catch himself and sprained his wrist.

Employee states he was holding onto a piece of steel while another employee was welding it into place and although he turned his head, he reports "flash burns" to both eyes.

Euclid driver opened radiator cap at coffee break to check radiator fluid.

Mechanic was cutting with torch and accidentally brushed forearm on hot steel.

Mechanic was repairing door window when it fell down in its track and pinched his left hand middle finger.

EE alleged while he was picking up cable & placing them on back of pickup truck he hurt his lower back.

Allegedly injured his back while working on primary crusher. (carrying oxygen cylinder) Note: Employee did not report this accident until 2-6-06.

While placing a drill pipe through a drill table hole, right ring finger got caught between the drill & the pipe, crushed right ring finger.

The ee allegedly bumped his leg on his own trailor hitch, while walking behind his own truck, resulting in a bruise on his leg.

ROLLING CONVEYOR BELT WITH PRY BAR ON RIGHT KNEE LIFTING PRY BAR.

EE WAS HELPING MECHANIC ASSEMBLE GYRO DISC 66 CRUSHER. EE WAS PINCHED BETWEEN CRUSHER HEAD AND CRUSHER BOLT WHILE THE HEAD WAS BEING SWUNG INTO PLACE (VIA CRANE).

CLIMBING ON SIDE OF BODY TO INSPECT BOX LOST FOOTING & FELL

WHILE UNLOADING SONO TUBE FIBER FORMS FROM TRUCK, STRAINED RIGHT ARM.

WHILE EXITING MACHINE SLIPPED ON CATWALK AND FELL MUD ON SHOES.

EE WAS HOISTING UP A COUNTER WEIGHT WHEN HIS RIGHT HAND LITTLE FINGER GOT CAUGHT BETWEEN THE CHAIN.

EE WAS TIGHTENING A BOLT ON THE CRUSHER CHUTE, THE RATCHET SLIPPED AND HIT HIM ON THE FOREHEAD, CUTTING HIM AND REQUIRING 11 STITCHES.

WITNESS WAS CUTTING IN SHAKER WHILE INJURED WAS WIRE BRUCHING SIDE PLATES OUT SDIE OF SHAKER. A SPARK FLEW INTO INJURED'S LEFT.

SHOVELING CRUSHED MATERIAL FROM PLATFORM. FELT PAIN IN CENTER BACK.

WHILE CHANGIN OIL FILTER ON BUCKET LOADER, SHARP EDGE OF OIL FILTER CAUSED CUT.

WHILE UNDOING LATCH ON LOADER DOOR, LATCH BROKE CAUSING CUTS ON FINGERS.

EE WAS CHANGING A CONVEYOR BELT ON THE PLANT THE HELP OF A CRANE BETWEEN THE CABLES OF THE CRANE WHERE WAS A SPREADER. WHILE MOVING HE BELT THE SPREADER CAME OUT FROM BETWEEN THE CABLES FALLIN G C HITTING HIS RIGHT HAND.

WHILE GRINDING SHOVEL BOOM IN PREPARATION FOR WELDING GRINDER WAS TURNED OFF & SLIPPED FROM HIS HAND - WHEEL WAS STILL COASTING & MADE CONTACT WITH SHOVEL BOOM CAUSING IT TO REBOUND WHICH RESU LTED IN CUT ON RIGHT HAND.

WHILE LIFTING SCRAP PIECES OF METAL, HURT BACK AGGRAVATING AN EXISTING CONDITION.

EMPLOYEE CAME INTO OFFICE AND SAID HE FELT UNWELL- SAID HE FELT FUNNY FEELING IN CHEST AND DECIDED TO GO HOME. APPROX. 1 WEEK LATER HIS WIFE NOTIFIED US THAT HE WAS DIAGNOSED AS HAVING A POSSI BLE HEART ATTACK WITH SOME FURTHER DIAGNOSIS FORHTCOMING.

EMPLOYEE WAS GRINDING ON AN OVERHEAD STRUCTURAL MEMBER WHEN AN AIRBORN PARTICLE FLEW UNDER HIS GRINDING SHIELD & BECAME LODGED IN HIS LEFT EYE. GRINDING SHIELD & SAFETY GLASSES WERE BEING USED AT THE TIME OF THE ACCIDENT.

WHILE PUTTING WIRE ROPE INTO SOCKET END JUMPED OUT HITTING FINGER & BENDING IT TO CAUSE FRACTURE.

WHILE REMOVING NUT WITH BREAKER BAR, WRENCH SLIPPED AND FINGER IMPACTED FRAME OF TRUCK.

WE WERE IN THE PROCESS OFF BOTTOM LOADING THE SHOT. THE DRIVER GOT IN THE TRUCK AND BACKED THE TRUCK TO THE NEXT HOLE. THE MOTION OF BACKING THE TRUCK UP CAUSED THE CHUTE/HOSE ATTACHMENT TO SW ING BACK AND FORTH AND CAUSING IT TO JUMP LOOSE AND FALL TO THE GROUND, STRIKING I.NAME, WHO WAS STANDING BY TRUCK. AFTER STRIKING I.NAME HE FELL TO THE GROUND AND THE CHUTE/HOSE FELL ON HIS

CLIMBING ON TANK STEP OF TRUCK IN ORDER TO ENTEROPER CAB SLIPPED AND FELL TO GROUND CAUSING INJ TO RIB.

HE WAS PUTTING ANIT-FREEZE IN COOLING SYSTEM OF A FRONTEND LOADER & SLIPPED ON THE TIRE OF THE LAODER HITTING HIS ELBOW ON THE FRAME OF THE MACHINE

WHILE WALKING C9ANE UP RAMP, FOR REASONS UNKNOWN CRANE BEGAN TO ROLL BACKWARDS EMP JUMPED OFF FOR FEAR THAT CRANE MIGHT BREAK THRU PROTECTIVE BERM- CRANE CAME TO STOP AT PROTECTIVE BERM