Buscar en el registro

He was helping in the work on a bearing on a 275C loader when a piece of metal flew off striking him in the right forearm.

EMPLOYEE WAS HELPING TO PUT PINS IN DOZER, USING HEAVY JACKS & HE HURT HIS LOWER BACK.

He was stepping off curb to go to his truck and he twisted his left knee.

USING TORCH AND WRENCH TO STRAIGHTEN STEP ON #915 LOADER AND WRENCH SLIPPED, HE FELL ON RIGHT KNEE ON CONCRETE.

HE WAS DISASSEMBLING THE CONVEYOR USING A HAMMER& PUNCH WHEN THE PIN CAME LOOSE. THE CONVEYOR SHIFTED & CAUGHT HIS LEFT INDEX FINGER BETWEEN THEPUNCH & CATWALK.

HE WAS CHANGING A DRILL BIT, IN DOING SO HE WAS LIFTING UP ON A TWELVE FOOT PIECE OF DRILL STEEL AND HE FELT A SHARP PAIN IN THE LOWER PART OF HIS BACK GOING DOWN INTO HIS RIGHT LEG.

HE WAS GREASING THE PLANT. WENT TO CHECK THE SCALPING SCREEN. HIS HARD HAT FELL OFF. HE RAISED UP AND HIT THE TIP OF HIS HEAD ON A STRIP OF ANGLE IRON.

HE WAS CLEANING THE ROCK BINS, HE WENT TO SHUT THE DOOR IT BOUNCED OVER AND CAUGHT HIS RIGHT THUMB BETWEEN THE DOOR AND THE IRON POST ON THE BIN, FRACTURING IT.

THE CRUSHER OPERTOR AND LABORER WERE PERFORMING MAINTENANCE ON A BENDING ROLLER OF THE D-610 BELT WHILE THE ROLLER AND THE BELT WERE IN MOTION. THE LABORER WAS CAUGHT AND INJURED.

HE WAS EXITING THE ELECTRIC HOUSE TRAILER, WHEN CLOSING THE DOOR THE WIND BLEW IT SHUT, PINCHING HIS MIDDLE FINGER ON THE RT HAND AGAINST THE DOOR JAMB, FRACTURING IT.

HE WAS UNLOADING STEEL FFOM THE BUCKET OF THE BACK HOE A PIECE OF THE STEEL SLIPPED, HE WENT TO CATCH IT AND THE STEEL CAUGHT HIS HAND BETWEEN IT AND THE GROUND, BREAKING IT.

HE WAS USING A HAMMER TRYING TO BREAK A ROCK THAT WAS CAUGHT IN THE CRUSHER AND WHEN IT CAME LOOSE THE ROCKS FELL KNOCKING THE HAMMER FROM HIS RIGHT HAND AND CUTTING IT BETWEEN HIS THUMB AND I NDEX FINGER.

HE WAS RUNNING THE CRUSHER CONTROL HOUSE, STANDING ON THE BOTTOM RUNG OF A STOOL, HIS FOOT SLIPPED, HE TRIED TO CATCH HIMSELF AND RAN HIS LEFT HAND THROUGH A PLATE GLASS WINDOW.

HE WAS HELPING TO HANG SHEET METAL ON THE NEW LANT, MOVING IT WITH A SLING OFF OF THE CRANE. THE METAL SHIFTED AND EE GRABBED IT AND CUT THE MIDDLE AND RING FINGERS ON HIS LEFT HAND.

HE WAS HELPING IN THE SETTING UP OF NEW PLANT, WATCHING EE, WHO WAS USING THE CRANE, TO LACE A PIECE OF H BEAM STEEL INTO PLACE, TH ESTEEL SLIPPED AND CAUGHT EE ON THE LEFT WRIST.

HE WAS USING HIS POCKET KNIFE TO SCRAPE ALIMITE FITTINGS ON THE LOADER SO HE COULD GREASE IT. THE KNIFE SLIPPED AND CUT HIS RIGHT THIGH.

HE WAS TAKING THE BATTERY CABLES LOOSE ON A EUCLID R35 THE BATTERY BLEW UP CAUSING ACID TO SPRAY IN THE EYES

HE WAS GRINDING A PIECE OF METAL ON A STATIONARYGRINDER WHEN THE GRINDER GRABBED THE METAL PULLING IT AND HIS LEFT THUMB INTO THE GRINDING WHEEL.

HE WAS TRYING TO LOOSEN A BOLT ON OUR CONE CRUSHER BY HITTING A WRENCH WITH A HAMMER. HE MISSED THE WRENCH AND HIT HIS LEFT THUMB FRACTURING IT.

HE WAS FILLING THE 175C LOADER WITH OIL. WHEN HE PARKED THE LOADER BESIDE THE OIL TANK HE STEPPED DOWN ONTO A THREE FOOT RETAINER WALL AND AS HE STEPPED DOWN FROM THE WALL WITH HIS RIGHT FOOT FIRST HIS LEFT KNEE STRUCK THE TOP OF THE WALL.

HE WAS RUNNING THE LOADER STOPPED TO CHECK THE TIRES ONE HAD A KNOT ON IT WHEN HE BENT TO EXAMINE KNOT IT BLEW KNOCKED HIM BACKWARDS HE COMPLAINED WITH HIS EYES & A HEADACHE

HE WAS ASSISTING IN POURING A WING WALL BESIDE A JAW CRUSHER,AS THE CONCRETE WAS BEING POURED INTO THE CONCRETE FORMS IT SPATTERED INTO HIS LEFT EYE.

HE WAS SERVICING THE ROCK SCREEN, HE SLIPPED AND FELL ON THE SCREEN CUTTING THE BACK OF HIS HEAD, HURTING HIS LEFT SHOULDER, AND CUTTING HIS RIGHT LOWER BACK.

HE WAS USING SHOVEL TO MOVE ROCK UNDER THE CONVEYOR BELT. THE SHOVEL GOT CAUGHT IN CONVEYOR BELT AND KICKED BACK HITTING AND BREAKING THIS RIGHT THUMB.

HE WAS HELPING WELD METAL ON THE SCREEN HOUSE, WHEN A PIECE OF METAL SLAG FLEW IN HIS RIGHT EYE AND SOME RUST GOT IN HIS LEFT EYE.

HE WAS HELPING THE WELDER WELD ON THE CONVEYOR AND RECEIVED FLASH BURNS TO BOTH EYES.

PUTTING CABLES ON BATTERY ON FRONT END LOADER, DRIVER STARTED IT, ENGINE BACKFIRED, CUTS BURNS TO THE R SIDE OF FACE TEMP LOSS OF HEARING R EAR

HE WAS WORKING IN THE SHOP AND HE WAS BRUSHING SLAG OFF OF SOME WELDED METAL WITH A WIRE BRUSHE, SOME OF THE SLAG FLEW INTO HIS RIGHT EYE.

HE WAS HELPING SOME OF THE MEN GET A ROCK UNJAMMED FROM THE ROCK CRUSHER & THE ROCK THEY WERE PRYING LOOSE SLIPPED & FELL ON H IS RT FOOT CAUSING BRUISING & PULLED LIGAMENTS TO THE FOOT

HE WAS PULLING LEVERS ON THE ROCK BIN AND PULLED MUSCLES IN HIS LOWER BACK.

WAS SHOVELING ROCK DUST FORM UNDER JAW CRUSHER AND WHEN HE TURNED AROUND HE HIT HEAD ON PC.. OF ANGLE IRON METAL CAUSING CUT ABO VE R. EYE.

HE WAS WORKING 7ON THE BOBCAT WHEN HIS RING FINGER ON THE RIGHT HAND GOT CAUGHT CUTTING THE FINGER.

HE WAS STEPPING3FROM THE LOADER TO THE EUCLID WHEN HE SLIPPED AND FELL HITTING HIS BACK ON THE LOADER LADDER AND HIS FOREHEAD ON A ROCK CAUSING BRUISED RIBS AND 14 STITCHES TO THE FOREHEAD.

HE WAS SERVICIN1 AN EUCLID, WHEN HE CLIMBED DOWN OFF THE EUCLID HIS RING ON HIS LEFT RING FINGER GOT CAUGHT IN THE EUCLID STEPS CUTTING HIS FINGER.

HE WAS LOADING 5 TRUCK WITH ROCK FROM THE ROCK BIN TO TAKE TO THE STOCK PILE, WHEN HE LOOKED UP A SMALL ROCK FELL IN HIS LEFT EYE.

HE WAS USING A 4RENCH AND HAMMER TO LOOSEN BOLTS ON MACHINERY, THE WRENCH SLIPPED AND HE HIT THE INDEX FINGER ON HIS LEFT HAND.

HE WAS PUTTING A HOE ON THE BLACTOP PAVER AND SOMEONE TURNED THE MACHINE ON AND CAUGHT HIS LEFT HAND IN THE MACHINE.

STEPPING OFF LOADER AND HURT HIS BACK.

HE WAS CHANGING THE TIRE ON THE TRUCK WHENHE STRAINED A MUSCLE IN HIS BACK LIFTING THE TIRE

HE WAS RIDING A LOADER WHEN HE HIT A HOLE AND PULLED A MUSCLE IN HIS BACK.

HE WAS CUTTING WEEDS ON THE SIDE OF BANK, WHEN HE SLIPPED ON SOME ROCK AND TWISTED HIS RIGHT KNEE.

HE WAS DRIVING A PIN OUT OF T HE LOADER BUCKET WITH A SLEDGE HAMMER WHEN THE HAMMER GLANCED OFF THE PIN AND HIT HIM ON THE LEFT HAND