Buscar en el registro

EE was using a utility knife, removing strips of belting that was wrapped around a tail pulley. They put a new blade in the knife, and they didn't think it would go through as easy as it did. When the knife passed through the belting, it punctured their left forearm, resulting in them receiving 7 sutures.

The EE has suffered a standard threshold shift in hearing compared to their baseline. EE has been retrained on the proper use of hearing protection and has also went over the hearing conservation plan with a safety team member.

EE has suffered a standard threshold shift in hearing compared to their baseline. EE has been retrained on the proper use of hearing protection and has also went over the hearing conservation plan with a safety team member.

EE has suffered a standard threshold shift in hearing compared to EE's baseline. EE has been retrained on the proper use of hearing protection and has also went over the hearing conservation plan with a safety team member.

Employee was repairing a waste pump. While lifting a shaft employee hurt right shoulder

Employee slipped while walking down steps. Employee fractured right ankle.

The employee was removeing a piece of steel from the magnet area in the plant and injured a hand while doing so.

Employee was sitting in haul truck and another employee backed into the truck.

Employee had rock fall onto left foot.

EE was closing the gate at the enrance of the mine. EE cut hand on the Latch of the gate.

A piece of metal flew off of a generator and hit employee in right leg

Employee was cutting a conveyor belt with a utility knife.

Clogged crusher.

Employee had a seizure and injured leg as a result of the seizure.

Employee was attempting to remove material by prying that was stuck in chute.

EE was closing a gate and felt pressure in EE's stomach area. EE looked and found that EE's abdomen had a buldge

Walked on the Scale to talk to operator and fell walking off of the scale.

EE was walking and tripped, EE fell on EE's face and broke EE's nose and rt. cheek bone.

Employee was crawling through railing and banged left knee.

Employee was cutting down a broken tree. It twisted and hit employee on the side of the head.

Employee was using a utility knife with right hand to strip wire before making terminations. The knife slipped and lacerated the top of left hand.

Employee was struck on the left side of the head with stone or dirt.

The employee drove the empty truck down a ramp leading to the pit floor and upon almost reaching the bottom of the inclined portion of the haul road, the employee lost control of the truck and the truck veered to the right and traveled on the top of a catch berm built on the right side of the roadway adjacent to the highwall.

The employee was exiting a front end loader. As employee was getting down from the ladder left foot stepped on a rock and employee sprung ankle.

Employee suffered a heart attack before starting work.

Employee tripped on steel stacked in shop area. NOTE: Employee did not seek treatment (to which restrictions were placed) until 05/11/2016. This report was filed within the 10 working day requirement.

Employee was climbing up into an articulated haul truck. The employee slipped and started to fall. EE's L. Leg caught between the rungs of the access ladder and the employee fell and EE's left leg stayed in between the rungs of the access ladder.

Employee was installing drive belts on the crusher and bruised right ring finger between sheave and drive belt.

Lifting pipe cover off test tubes and strained a back muscle.

Contract Welder ee was walking in the area adjacent to the primary jaw crusher and tripped on concrete from "clean out" of previous concrete pour.

Over the road CDL truck driver irritated his eye while cleaning his truck at the scale house. Employee was using a cleaning chemical called Big Orange to clean his truck and while rinsing the big orange off, it splashed into his right eye.

Employee stepped on a rubber conveyor belt lying on the ground which had a rock underneath it. As a result, employee sprained his left ankle.

Pressure washer used to wash haul trucks.

While climbing down the ladder of a haul truck,employee's foot got stuck between ladder rungs causing the employee to fall. As a result, employee sprained/strained her left knee.

Something got in employee's eye.

Employee was in the process of tightening a conveyor belt with a come-along when the chain being used broke and struck the employee's left wrist.

Employee was cleaning crusher when his foot got caught between the motor and guard.

Employee claims to have injured back while lifting rollers. Employee has had past back problems.

Employee closed his pickup truck car door on hand causing contusion and lacerations to hand and fingers.

Employee was operating truck and drove on to berm hurting lower back.

Employee is a mechanic, while working on equipment place a large metal bar on the control panel. Employee turned and attempted to catch bar as it fell from the control panel causing his palm of hand to be between the metal bar and the equipment.

Employee is an over the road delivery driver and slipped while walking across scale to get into his truck. The left knee had torn ligaments and required surgery.

Employee was exiting a CAT 980 front end loader. His right elbow struck the upright of the ROPS.

Employee was lifting the side cutter for an excavator bucket and experienced a thoracic sprain.

Employee was driving a haul truck and after loaded with oversized rock, the front of the haul truck lifted off the ground and back to the ground. This caused the employee to have lower back pain.

Employee was removing blocking cribs and strained lower back. Employee reported injury on 11/05/2013.

Employee was lifting a pump with other employees and strained his leg. Employees on site were previously instructed to use a come-along to lift anything heavy.

Employee was lifting an access door off of the shaker and strained his left shoulder.

EE was wiring conveyor #11 starter which was locked out. This starter was directly above a 100 amp 480 volt 3 phase disconnect for conveyor #12 hoist and travel. This disconnect was energized on the line side. Screwdriver went into the open panel past the protective barrier and crossed phases creating an electrical explosion.

Employee was shoveling off a belt, a rock fell from above hitting the employee in the lower back. Employee was wearing all required PPE and no lost time resulted from the injury.