Buscar en el registro

Removing a rock from Grizzley chute with a come a long. Chain slipped off the rock and rock smashed pinky finger.

Removing bolts on a truck differential, two bolts broke off as he was pushing and pulling and pulled a muscle in back.

Employee was repairing a power cable (S/O 480v) that was pulled out of strain relief. He was moving the cable to get slack for the repair. There was cut or worn spot that shorted out causing an arc that caused first and second degree burns on right hand and thumb.

While pushing a roller back into its bracket with force, roller in hand slipped hitting a piece of metal.

While climbing down a ladder from the upper deck of the jaw crusher, EE slipped off the bottom rung and sliced open his shin.

Employee was walking underneath the belt to clean the magnet, and felt a thud and was on the ground. The yellow hopper went over the tail pulley of screen feed #2 (equip #7178) broke loose of its welds & pinned employees left knee to the ground. Had to use a loader & chain to lift the chute off.

While operating Water Pull #7, hit bumps in road, caused pain in lower back. 911 called and transported to the Hosp.

While using a bucket from a 980F Wheel Loader, this employee and another got into the bucket was hoisted up to reach aprox. 7 feet to change a whiper on a conveyer belt. Driver of the 980F had a foot that slipped off the brake, and the machine went forward pinning the injured employee.

While slimbing down a ladder a steel pole fell off the first deck and hit employee in the head.

LOADER STEPS WERE WET, WHEN CLIMBING OFF EQUIPMENT FROM 3RD STEP FROM THE BOTTOM INJURING LEFT THUMB AND LEFT KNEE. DOCTORS DIAGNOSIS WAS SPRAIN TO BOTH BODY PARTS.

WHILE PULLING PAD HE REACHED UP TO PULL A CHAIN THROUGH THE LOOP ON THE LOADER BUCKET, STRUCK RIGHT ELBOW ON BOLT ON THE TAIL PULLEY ADJUSTMENT BOLT.

EE WAS PUTTING A SET OF LEGS UNDER A CONVEYOR, HE THEN SET THE WEIGHT OF THE CONVEYOR ON THE LEGS. WHILE STANDING ON CATWALK TO SECURE LEGS, THE LEGS SLIPPED, CAUSING HIM TO HIT HEAD AND KNOCK ING HIM DOWN.

EE WAS LOADING TRUCKS WITH GRAVEL ON ROUGH TERRAIN, HE WAS BOUNCING AROUND IN THE CAB OF THE LOADER, CAUSING HIM TO HURT HIS BACK.

EMPLOYEE WAS WORKING ON A SCREEN AND WHEN HE STARTED TO COME DOWN HE REACHED FOR A RAILING - HE MISJUDGED THINKING HE HAD HOLD OF RAILING BUT DID NOT - CAUSING HIM TO FALL 25 FEET LANDING ON A METAL STAIR.

GRINDING - METAL FLEW INTO EYE & STRUCK.

NO NARRITIVE

WALKING DOWN STEP OF A GENERATOR SET SLIPPED & FELL 4 STEPS

HE WAS BACKING UP A D9N DOZER AND HIT A 631E SCRAPER, BUMPED HEAD ON TOP OF CAB.

CUTTING METAL PLATE WITH A WELDER TORCH SPARK WENT THROUGH COVERALL AND DOWN/INSIDE TOP OF SHOE.

BENT OVER SHOVELING OR SOMETHING (HE IS NOT SURE) HE STOOD UP AND HIT HIS HEAD.

ASSISTING WELDER WHEN HE RECEIVED A FLASH BURN TO BOTH EYES.

THE CAT 631 SCRAPER BLEW THE RIGHT FRONT TIRE WHILE TRAVELING ON A HAUL ROAD. THE SCRAPER PULLED TO THE RIGHT GOING OFF THE ROAD AND STRIKING A CAT 613C WATER WAGON THAT WAS PARKED. THE EQUIPM ENT OPERATOR SUSTAINED A BUMP ON THE HEAD AND BODY SORENESS FROM BEING THROWN AROUND DURING THE IMPACT. HE WAS WEARING A SEAT BELT.

WORKING ON PLANT REPAIRS. WRENCH SLIPPED OFF BOLT CAUSING LASCERATION TO RIGHT RING FINGER.

RUNNING A LOADER RAN OVER BUMPS CAUSING WHIPLASH-NECK MUSCLE SPASM AND PINCHED NERVE.

USING CUTTING TORCH PIECE OF SLAG FELL ON WELDER BATTERY BLEW BATTERY APART ACID IN EYES & RT EAR SOUND DISTANT

REMOVING 48 INCH PIPE WRENCH FROM WORK AREA WHEN IT FELL ON LEFT LITTLE FINGER LAST KNUCKLE.

INSTALLING HYD PUMP-PUMP SLIPPED FROM CHAIN CUT RIGHT LITTLE FINGER.

WELDING -FLASH BOTH EYES.

CLIMBING DOWN-HURT BACK NO LOST TIME.

CHANGING MIDDLE DECK SCREENS ON WET PLANT EL JAY SCREEN FELL INTO LOWER DECK HITTING SPRAY BARS & BRACES LANDING ON LEFT SIDE HITTING BACK HIP LEFT ARM BLEEDING FROM MOUTH ETC

CLEARING ROCKS IN JAW OF CRUSHER-BENT OVER TO CLEAR SOME OUT PULLED MUSCLES IN BACK.

LAYING PIPE LINE - STRAINED BACK.

INJURY TO GROIN BOUNCED IN BOBCAT & HIT SAFETY BARS

STEPPED OFF FROM CRUSHER ONTO SOME ROCKS SPILLAGE WHICH WAS ON CONCRETE FLOOR

HE WAS PRYING A ROCK OUT OF THE FEEDER JAWS WHEN HE PUSHED TO HARD ON THE PRY BAR STRAINING THE STOMACH AREA.

LIFTING PARTS INTO GENERATOR TRAILER AND STRAINED MUSCLES IN GROIN AREA,HE CONTINUED WORKING UNTIL HIS OPERATION WHICH WAS ON JUNE 21,1989.

EMPLOYEE TURNED TO GET DOWN STAIRS AND FELL INJURING HIS LEFT KNEE