Buscar en el registro

While mounting tires on rims in shop - felt pain in left elbow.

While replacing recoil spring on feeder for crusher the tooling slipped causing the spring to pinch left thumb.

Employee stepped off of a ladder and while backing up, employee tripped over crusher blow bars on pallet. Employee fell on the blow bars causing a scrape on right shin.

Employee was picking rocks by conveyor and got finger caught between rocks, cutting finger on sharp edge.

While picking up spreader bar to put on lowboy, spreader bar for the dragline bucket. The spreader bar slipped, pinning finger against a piece of metal.

EE tripped on the air hose from EE's service truck. EE fell on left leg trying to catch self as EE fell. EE broke both bones in left leg below the knee.

While climbing out of dial split tank, EE heard something pop and pull in left shoulder. Pain became worse as time went on.

While getting off dragline, EE twisted knee on rock on the ground.

Employee twisted/overturned left ankle getting off ladder on Pioneer crusher.

While driving the D400 E Haul Truck, EE was shaken around cab and hit elbow on metal bar on left side door/window. Elbow sore and tingling in one finger.

While putting air in tire in the shop, the tire sidewall blew out causing the tire to flip over knocking the employee down causing the tire to land on right ankle.

Employee caught knee between tire and bumper while putting on alternator on Truck. Put pressure on knee and or twisted knee cap.

While working on 2400 Dragline air cylinder, the wrench slipped which caused EE's wrist to hit the brake band/drum.

Employee was using a hammer, striking a back-out hammer (a punch hammer), when a piece of metal broke off the punch end, striking leg.

EE was trying to loosen nut on Eagle Sand Screw. Nut broke loose. In process the wrench pinched finger against frame.

Employee was taking engine out of loader when engine broke free of transmission. Right elbow hit loader frame. Continues to have soreness in elbow. Employee did not report accident until 1/13/2017.

While using pry bar on Lippmann Crusher, bar slipped hitting EE's right palm of hand. This caused cut on palm of hand. EE was not wearing gloves.

Employee was pulling linkage pin on a 980G Loader. Pin shifted smashing/pinching tip of left little finger.

Employee was moving Pegson crawler crusher with hand control. The door to crusher panel hit ramp structure. Door support cylinder knocked his hard hat off and door fell down cutting head.

Employee was working on the 375 Excavator, when loosening a hydraulic line, oil sprayed on left hand and body.

EE was helping to repair #1 Belt on the Aggregate Plant when he felt a burning on the inside upper thigh. He assumed he was stung by a bug. Date first reported to supervisor 12/23/13

While working on crusher, pry bar slipped and cut finger.

Rock from crusher hit employee in mouth.

EE lost control of truck and hit power pole. He does not know why he lost control.

EE was taking back cover off engine compartment of 980B when cover slipped and cut and pinched left little finger on frame of loader between cover and frame.

EE was digging out the 3500 dragline shovel. He felt pain in lower back. Pain now runs down back of legs.

EE was working on clamps on Pioneer belt. A sliver of metal entered eye. EE was wearing glasses and face shield.

Employee found tick on right side of neck. He pulled it off. Wednesday morning he found a lump on his neck and it kept getting bigger.

EE foot slipped when he was walking on dragline. When he went to catch himself, his left hand grabbed a mirror which broke resulting in a cut middle finger.

Accident was not reported until January 16, 2012. EE was lifting cribbing when he felt a pain in right middle of back.

Employee slipped and fell on left knee at Canica Crusher.

Putting on welding hood when something got in eye.

While removing a rock from the crusher, the rock rolled and hit employee's right knee.

When employee was crossing under conveyor he slipped on the wet ground. He tried to catch himself. All weight went onto left ankle when he fell.

EE slipped getting our of bobcat skidstear loader. He tried to catch himself and jammed his hand into the ground

A side arm on 740 Articulated Haul Truck was being cleaned in wash area when the arm slipped off blocks falling on right foot.

While walking on catwalk at end of day, employee slipped and fell on right side.

This accident was not reported to supervisor until 1/22/09. Employee was operating a 740 haul truck. He complained of hitting a rut in road and was thrown around in cab. Seat belt was on. When it was reported to supervisor, employee complained of blood in urine. Then when he went to Dr. he complained of blood in stool.

Employee was trying to get rock out of the crusher when he slipped, tearing finger on guard when falling.

Another employee was throwing a chain over an overhead pipe when the hook on chain hit him on forehead.

EE was taking out back plate of #2 screen deck, when the plate fell, pinching outside of right foot.

Repeated constant use and writing of weight scale tickets.

EE was tightening teeth on dragline bucket with 3/4" drive ratchet when he pulled back muscle. Did not tell supervisor until 10/26/07.

Shoulder sore from swinging sledge hammer while helping to repair a broken drive chain on 2400 Dragline No. 2.

EE was driving a d400 Haul truck when he hit a bump and felt something in shoulder. Pulled muscle in left shoulder.

EE was walking between crusher and catwalk when he stepped off side of catwalk causing ankle sprain. (overturned ankle). Did not want to go to dr. on 8/10/07. Then 8/23/07 he decided to go to Dr.

Employee was pulling on a wrench when the wrench slipped off bolt. Wrench in his hand came back and hit him in the face.

While cleaning crusher, ee strained his shoulder and arm.

A steel bar used to clean the feeder fell against the door window of the control room. Employee was inside the control room at the time. A piece of glass or dirt went into his right eye from the broken window.

Ee was greasing the truck bed cylinder on a ladder. The ladder started to fall. Instead of falling with the ladder, He jumped off the ladder and landed on his feet. He felt some pain in his lower back.