Buscar en el registro

A repair job completed, a chain was attached to the excavator bucket. The bucket & the chain were on the ground. When the excavator was moved, the employee was standing on the chain as the bucket was swung. Employee was tripped, but did not fall.

Employee was operating a haul truck. Employee complained of headache & light-headedness. Employee was taken to ER and later diagnosed with a sinus infection & BP issues. Employee was placed off-work until Monday, July 26.

Employee was replacing skirt board on stacker belt. Wrench slipped and impacted finger. First aid completed. Employee reported Jan 20 finger was infected and went to clinic. Clinic provided antibiotic/meds; employee released to return on Jan 25.

Miner was changing parts on belt weight scale. Dropped a part and it impacted their right pinky finger.

Miner was helping move/set a wooden form in preparation for a concrete pour. EE got finger caught under the form as it was placed on the ground.

Employee was exiting cab of service truck. Turned knee when foot contacted the ground.

Using impact air wrench to remove bolt to replace gravel screen. Placed hand on nut head and wrench spun nut head, cutting finger.

Picked up five (5) gallon bucket out of company truck - pulled back muscle.

EE was training a new haul truck driver. EE was sitting in the jump seat next to door. Haul truck encountered a rough road condition and the EE bumped his shoulder against door of truck.

Employee stood up after kneeling, experienced knee pain (popped). Incident reported 8/25/14. Visit to Dr on 9/2/14, with light duty work.

Operator adjusted fan & cut finger on fan housing. Initial treatment first aid only. Soreness led to doctor visit on 9/20/13, with cleaning and medicine only. No lost time.

Lifting out scrubber roller, roller shifted to caught finger.

Working/walking near sand pump/pipe. Hit leg on lifting eye. Required 4 stitches.

Employee closed door to dredge control room on finger

EE Chipping slag off weld, got something in eye. Did not report until questioned by foreman 6/5/12. Sent to doctor for check, Received meds and returned to work. Not regular mine Employee

Leaned on pipe that had just been welded & burned spot on left lower forearm. First aid completed. Failed to inform anyone that he went to ER on 4/20/12.

Miner using a socket wrench to adjust belt. Tool slipped and miner struck elbow on frame. Miner did not want to go to the doctor on date of incident. Elbow soreness continued & he went to the doctor on March 3, 2011. Medication prescribed. No lost time or restriction.

EE was trimming belt wiper. Knife slipped and cut his left thigh.

EE was lifting plate to begin repair felt pull in his back.

Employee fell exiting the excavator.

Employee put left hand on cable to remove slack. He was holding control in right hand. Employee pressed incorrect button & finger was pulled in sheave. Returned to work (light duty) on 11/9/09.

Moving cutting edge in storage area. Paint caused two (2) new edges to stick together & lifted both - straining shoulder.

Counterweight was being removed with power purge. Piece broke off counterweight to struck foreman in back.

Employee climbed over framework (I-beam) between frame and belt to repair belt clamp. After repair, employee bruised rib area while exiting.

Used pocket knife to cut cable tie. When knife passed through cable tie, he stabbed left hand.

Cleaning material chute with punch bar. Hit finger on side of chute.

EE was shoveling material under tunnel belt, strained shoulder. Reported injury to foreman on 3/29/07 in the PM. Doctor vistit on 4/2/07.

Backing dozer in stripping area, backed over a pile & jarred his back on the landing; aggravated an old back injury.

LIFTING BUCKET TO ADD WATER TO RADIATOR ON GENERATOR. USED BOTH HANDS. BROKE BONE IN LEFT HAND.

WORKER WAS DESCENDING STAIRWAY FROM CONTROL HOUSE OFFICE TO GROUND LEVEL. HIS FOOT SLIPPED FROM THE STAIR TREAD. WORKER FELL BACKWARDS ONTO CONCRETE SLAB DISLOCATING HIS RIGHT SHOULDER

HE WAS HELPING SET A MUD PUMP INTO THE POND AND THE CHAIN LINK BROKE. THE BROKEN LINK FLEW ABOUT 20' AND HIT HIM IN THE FACE.

USING A WRENCH TO TIGHTEN A BOLT ON THE SAND PUMP.

USING A SHOVEL TO DIG MUG FROM A DRAIN PIPE.

HE WAS CUTTING A PIECE OF BELT WHEN THE KNIFE HE WAS USING SLIPPED AND CUT HIS LEG.

EE WAS WORKING TO ASSEMBLE/SETUP CRUSHER SCREENING UNIT. HE FELL/STEPPED INTO A HOLE, BRUISING ELBOW.

REMOVING HYDRAULIC PUMP, STRAINED SHOULDER (L) WHILE MOVING PUMP.

EMPLOYEE WAS EXITING AN OFF-ROAD TRUCK. HE WAS CLIMBING DOWN THE LADDER AND HE MISSED A STEP, TWISTING HIS RIGHT ANKLE.

CLEANING AIR CANNON WHEN COMPRESSOR WAS TURNED OFF. STORED ENERGY EXPELLED, BLOWING SAND/DEBRIS INTO FACE AND HANDS.

AS HE WAS GETTING ON THE DOZER, HE SLIPPED AND HIS RT SHIN HIT THE TRACKS ON THE DOZER.

EMP WAS BETWEEN 2 OTHER MEN AND THEY WERE ALL THREE WELDING ON 5-15-96. ON 5-16-96 HIS EYES WERESORE AND VERY RED.

EMP WAS BACKING THE TRUCK UP AND THE STOP BLOCK GAVE AWAY. THE TRUCK BACKED INTO THE HOPPER.

BACKHOE WAS MOVING 12" PIPE WITH CHAIN. CHAIN CAME UNHOOKED. BUCKET SWUNG AND STRUCK EE ON LEFT SHOULD AND LEFT SIDE OF HEAD.

HE WAS CUTTING A PIECE OF CONVEYOR BELT WHEN THE KNIFE HE WAS USING SLIPPED AND CUT HIS LEFT HAND BELOW THE THUMB.

ROCK FLEW FROM SHAKER INTO RIGHT EYE.

EE WAS LOFDING STEEL INTO LOADER BUCKET STEEL SHIFTED AND COUGHT FINGER BETWEEN LOADER BUCKET AND STEEL.

EUIPMENT NORMALLY USED TO LIFT SCREENS (SHAKER SCREENS. APPROX. 60 LBS) TO SECOND DECK OF PLANT WAS OUT OF ORDER. EMPLOYEE WAS ATTEMPTING TO LIFT SCREENS FROM GROUND TO SECOND BY USING ROPE TO PULL SCREEN UP. IN THE PROCESS OF LIFTING SCREENS EMPLOYEE STRAINED HIS LOWER ABDOMEN ON RT. SIDE.

CHANGING BEARING IN BALDE MILL-THE BOLTS ON SAHFT CUT HIS LEFT LEG ABOVE THE KNEE.

STEPPED IN HOLE TWISTED BACK.

REPAIRING SCREEN ON SHAKER WHEN HE HIT HIS KNEE ON THE CROSSBAR.

GRINDING WITH GOGGLES ON. RUST FLEW UP AND WENT INTO HIS RIGHT EYE.