Buscar en el registro

After conveyor did not start, Employee went to check the reset button on the electrical panel. When they bent down to see it, their hand was close enough to the panel that they believes sweat dripped from their hand and electricity jumped from panel to their left pinky finger.

Hearing test results show standard threshold shift as defined by MSHA.

Hearing test results show standard threshold shift as defined by MSHA.

Hearing test results show standard threshold shift as defined by MSHA.

764 Power screen overheated. EE opened radiator cap to check fluid level. Under pressure, fluid sprayed out and got onto EE's arm and face.

Carrying 4x4 oak blocks (one in each hand) to chock wheels of conveyor for maintenance. When setting down block in right hand, block fell from hand and twisted EE's right forearm. Diagnosis was strain of right bicep.

Hearing tests on 8/20/18 and 8/28/18 show standard threshold shift as defined by MSHA. Employee's normal duties are to run forklift, front end loader, bagger, and sand plant.

Performing normal duties of running front-end loader to load trucks and power screen.

Shop technician working on crusher, #1 toggle seat in toggle plate. Toggle seat swung loose, pinching right index finger between seat and frame. Contusion to right index finger. No lost time. No restrictions.

Employee attempted to turn on battery "dead-man" switch on generator and burned thumb and finger on hot switch.

Operating various loaders, generators, screens, and crushing equipment during regular job duties. Recordable shift in hearing as per testing performed 8/11/14.

Operating various loaders, generators, and crushing equipment during regular job duties. Recordable shift in hearing as per testing performed 8/13/12.

EE did a lot of pulling, pushing & lifting during the week, helping to set up crushing spread at K-pit. On Friday the 18th, he had pain on left side of groin. He reported HR on Monday & had hernia diagnosed on Sept. 18. No treatment had been given, no lost time, no restrictions until surgery on November 7, 2008.

EE has been a laborer & equipment operator. He reported on 3-29-07 that over the last couple of months, his pinkie & ring finger are numb. He has been diagnosed with carpel tunnel in the elbow. Surgery is scheduled for 4-17-07. He has no lost time up to that date. This report prepared when notification of surgery was confirmed.

Employee & co-worker were prying a piece of plate steel up into place under the cone, above the belt. The crowbar slipped and hit employee above the left eye causing the cut.

EE is a long time loader operator. he reported on 6-14-04 that over the last nine month his left hand has become numb and tingling. he has been since diagnosed with carpal tunnel of left wrist. surgery is scheduled for 8-16-04. he has had no lost time up to that date. this report prepared when notification of surgery was confirmed.

EE WAS HANGING EMPTY BAGS ON FILLING SPOUT OF BAGGING MACHINE. THERE WERE NO APPARENT REASONS FOR INJURY OTHER THAN HE WAS MOVING HIS HAND AND ARM TO LIFT ONE EMPTY BAG AT A TIME. EE FELT PA IN AND HAD SUDDEN SWELLING ON TOP OF HIS HAND.

EE WAS USING AN ELECTRIC GRINDER TO REMOVE PAINT FROM A PIECE OF METAL THAT NEEDED WELDING. EVEN THOUGH HE WAS WEARING SAFETY GLASSES, A SMALL PIECE OF METAL MUST HAVE ENTERED HIS EYE.

EE WAS HELPING REPLACE A SCALPING SCREEN. HE WAS HOLDING IT UP FOR POSITIONING USING A 5'PRYBAR,THE SCREEN MOVED, PINCHING HIS FINGER.

CLIMBING ONTO SEAT OF BAGGING MACHINE HIS LEG BRUSHED ACROSS NOZZLE SHARP EDGE CUT HIS LEG

REPLACING SCREEN. CLAMP BAR UNDER TENSION HIT FINGER.

EE WAS FIXING CRACKED HYDRAULIC FITTING SLIPPED ON OILY SURFACE FELL SIDEWAYS INTO BRACE, HIT RIBS. HE THOUGHT THEY WERE BRUISED, 5 DAYS LATER HE HEARD THE RIB CRACK & FELT PAIN

*NOTE - EE DID NOT REPORT UNTIL 10/18/99. HUMAN RESOURCES DID NOT INFORM PREPARER UNTIL 12/7/99. EE WAS LIFTING FULL BAG OF SAND @ BAGGING PLANT, 100 LBS, FELT STRAIN IN MUSCLE IN RIGHT ARM.

EE LOST BALANCE WHILE SPLICING BELT CONVEYOR, GRABBED SUPPORT CABLE AND SLI8D HAND ALONG CABLE. CABLE CUT HAND AT BASE OF THUMB.

EE WAS STRAIGHENING A PALLET ON BAGGING MACHINE PALLETIZER, ARM PULLED OFF OF PALLET & HIT FRAMEWORK OF MACHINE, BRUISING FOREARM.

EE WAS OPERATING THE PALLETIZE. SHE MOVED TO STRAIGHTEN SOME BAGS OF SAND ON ANOTHER PALLET, WHEN THE PALLET, CAME DOWN LINE AND RAN OVER HER FOOT, PINCHING HER TOE IN SOME ROLLERS.

EE WAS CLIMBING DOWN OFF LOADER, STEPPED ON A ROCK WHEN GETTING OFF OF LOADER STEPS, TWISTED HIS RIGHT ANKLE.

EE WAS MOVING GOVERNOR CONTROL ROD ON WELDER ENGINE AND HAND SLIPPED OFF, FINGER CONTACTED BLADEON FAN.

EE WAS IN THE AREA OF A MAINTAINANCE PERSON, WHO WAS DOING SOME WELDING. HE DID NOT KNOW HE WAS EXPOSED UNTIL THE FOLLOWING DAY, AND HAD DROPS PRESCRIBED TO PREVENT INFECTION AND HELP SOOTH TH E EYES.

EE WAS ASSISTING MAINTAINENCE PERSON IN REMOVAL OF A HYDRAULIC DRIVE MOTOR FOR POWERSCREEN CONVEYOR. WHILE LOWERING THE MOTOR, HE FELT PAIN INHIS BACK.

EMPLOYEE WAS REMOVING A STONE LODGED IN A CONVEYOR HOPPER. THE STONE CAME LOOSE, FALLING IN CONTRACT WITH THE BELT. THE STONE WAS CARRIED FORWARD & PINCHED HIS HAND AGAINST THE HOPPER.

BRAKES ON FORKLIFT FAILED WHILE BACKING DOWN RAMP OPERATORS FOOT CAUGHT BETWEEN FORKLIFT & CONCRETE FLOOR WHEN FORKLIFT TIPPED OVER ON ITS SIDE

EE WAS LIFTING A PIECE OF STEEL TO BE PUT BACK IN PLACE UNDER THE CRUSHER JAW AND ABOVE THE DISCHARGE BELT. HE DID NOT REALIZE IMMEDIATELY THAT HE WAS PUTTING TOO MUCH STRIAN ON HIS SHOULDER M USCLES.

EE WAS SHARING OUT A FLOOR MAT AT SAND PLANT OFFICE TRUNED BODY TO CHANGE DIRECTION & TWISTED HIS KNEE X-RAYS INDICATED TORN TISSUE IN THE KNEE

EE & EE WERE REPLACING A BOLT IN A BEARING MOUNTEE WAS DIRECTLY UNDER FRAMEWORK EE LET BOLT SLIP EE WAS HIT IN FACE WITH BOLT REQUIRED TWO SUTURES

EL JOY CONE CRUSHER WAS PACKED WITH CLAY MATERIAL. EE WAS ATTEMTPING TO CLEAR THE OPENING WITH A BAR BY POKING THROUGH THE CLAY BAR CAUGHT IN CONE AND MOVED SUDDENLY, STRIKING HIM IN UPPER THI GH, CAUSING A BRUISE. NO MEDICAL TREATMENT INVOLVED, ONE LOST WORKDAY.

;USING TORCH HOSE RUPTURED CAUGHT FIRE BURNING HIM

I.NAME SLIPPED ON BOTTOM STEP OF M-75 LOADER, LOST BALANCE, FELL TO GROUND, SPRAINED WRIST TRYING TO CATCH HIMSELF.

INJURED WAS CUTTING PRODUCT TUBING WITH UTILITY KNIFE,IT SLIPPED OUT OF MATERIAL HOSE AND SLICED INDEX FINGER ON LEFT HAND.

I NAME WAS PART OF A CREW REMOVING FIBERGLASS SPRINGS FROM THE WASHER A CUTTING TORCH WAS NECESSAARY TO REMOVE RUSTED BOLTS THE HEAT FROM THE TORCH BURNED PART OF THE FIBERGLASS SPRINGS CREATI NG FUMES I NAME WAS NOT IN A WELL VENTILATED AREA AND/OR TOO CLOSE TO FUMES

EMPLOYEE WAS STACKING PALLETS WITH SAND BAGS.ONE OF THE BAGS COMING OFF THE CONVEYOR MADE HIM TWIST TO GUIDE IT DOWN AND HE FELT PAIN.

EXITING GENERATOR TRAILER STEPPED ON LADDER IT SLIPPED OUT HE LOST BALANCE FELL TO GROUND

REMOVING CHAIN FROM CONV. OF BAGGER. CHAIN CAME OFF CONVEY UPPER PORTION DROPPED STRIKING HIM ON NOSE CAUSING LACER. BREAK TO NOSE.

ICY STEPS ON GENERATOR TRAILER CAUSED SLIP.