Buscar en el registro

Employee, a deckhand, was pulling a cable when EE strained a muscle in EE's lower back. Employee was examined and given a shot of muscle relaxer and prescribed medication.

Employee was accessing the second deck of a Diester screen to check screens and their knee dislocated while getting in the screen. After imaging it was determined they had torn ligaments. Employee is now scheduled for surgery on 4/10/26

Employee was shoveling frozen material from under a conveyor belt. Employee went home and their back started hurting. Employee had a strained lower back muscle and was prescribed a steroid pack and muscle relaxer.

Employee was removing snow and ice from a conveyor belt with a flat nosed shovel. While pushing the ice off the belt, the shovel caught on the belt and employee's body weight went forward. The wooden handle came back and hit employee in the mouth. This caused 2 teeth to break and had to be extracted. Antibiotic prescribed.

Visitor incident report. Visitor was walking when visitor tripped and hit head on the ground. Visitor was transported to the local hospital where visitor received stitches.

Employee was removing a side wall bucket guard on a loader. The guard was stuck. EE used a 4lb hammer to dislodge it. When EE hit it a piece of metal chipped off and went into EE's leg. Removed in ER. Returned to work, no stitches, antibiotic prescribed.

Dust got in the eye of the employee when they went to retrieve a wrench they dropped. The wrench fell onto a covered belt. Employee hit the cover and dust got into their face. No foreign bodies were found when seen at the doctor. Antibiotic drops were prescribed as precaution.

Deckhand was moving a cable when a burr went through their leather glove and punctured left pinky. The burr had to be removed at the hospital. Antibiotic was prescribed and tetanus shot given. Returned back to work. No other treatment given.

Employee was up on Pc650 Excavator fueling it. EE missed a step with their foot and twisted leg and fell still on the excavator. Two workers had to help get EE off the excavator. EE injured left leg. Extent of injuries are unknown at this point.

Employee was picking up a 50 gal drum, used as a trash can, and dumping it into a dumpster. When EE went to lift the drum, EE hurt left arm. After medical evaluation EE had a torn left bicep tendon that required surgery to repair.

Employee was removing a pin on a cylinder with a sledgehammer and grizzly bolt. Employee swung and missed the bolt used to drive the cylinder out and smashed right index finger requiring stitches.

Day Shift Quarry Manager was inspecting a self retracting life line when they experienced shoulder pain. After a period of diagnostic imaging, it was determined that they had a torn tendon in their shoulder. Surgery was needed to repair the tendon. Surgery was completed on 8/30/19.

QC Tech noticed no rock coming off the belts at the Wash Plant. Went to investigate and noticed the plant operator trying to clean a chute that had backed up. The rod the operator was using to clean the chute out came out and hit the QC Tech cutting right ear.

Removing pin with bar, pin and or bar struck tooth, breaking it.

Employee was helping install a cutting edge on the motor grader. EE right hand index finger and ring finger was pinched between the cutting edge and the mold board. Stitches were required.

Employee was using a pocket knife with EE's left hand to cut a piece of plastic. The knife slipped and cut EE's right index finger.

Employee was removing a rock from the walkway of loaded barge. Employee reached down with his left hand to slide the rock off when another rock that was resting on top of the rock he was trying to move released and came down on his left index finger.

Employee fell at work bruising his right knee on 4/14/14. On 5/29/14 employee went to the doctor to find that cellulites had set in his right leg. Employee was prescribed antibiotics to treat the illness.

Employee was cutting the tabs off of Polydeck screens. Employee went to move a ratchet form that was sitting on the stack of Polydeck panel. The knife slipped out of his right hand and cut his left thumb.

It was partly cloudy. 50 degrees. Employee was wearing rubber boots.

Miner was hooking up a trailer to his pickup. Miner felt no pain in his right arm while lowering the jack. Miner returned the trailer and unhooked the trailer. Miner felt no pain while unhooking the trailer. While in office miner felt tenderness in his right arm.

Employee was descending from the top of a metal conex, after securing the conex for transportation. Employee fell while descending, landing on the bed of the trailer.

Employee walking away from equipment when he felt a pop in his left ankle.

It was a cool sunny morning. Employee was walking up the stairs to operate plant when his knee popped.

sunny warm, mid 80's. Employee came in on day off to help replace eletric motor at plant.

Deckhand was washing the M/V Super Stone when he stood up and hit his head on the A/C unit on the deck.

Late afternoon, cloudy, misting rain.

employee was climbing up on Caterpillar 773F haul truck and his right foot slipped off the second step. His right inner thigh struck the step bracket causing a laceration. The employee received staples in his leg to close the wound.

EE was walking from a loaded river barge to the stationary barge. EE slipped and fell on his left leg. EE sustained a broken fibula and tibia.

Employee engaged a limit switch on a skid steer activating the bucket. The door of the skid steer was open and employee's finger was caught between the door and the bucket.

While using an air wrench, the wrench slipped and struck left hand.

EE was removing shroud froma bucket. Struck metal ogject with sledge hammer. Metal fragment flew off and stuck in leg.

ee was changing out a battery on a D-8 dozer. Battery slipped and ee dropped battery on finger.

Lifting a box of boosters off a bulk truck, hurt low back.

EE was going up stairway on portable crusher. He slipped and grabbed the handrail to keep from falling.

Employee fell on his tailbone while removing rock from jaw.

While operating end dump, operator stopped at stop sign and had apparent heart attack.

EMPLOYEE WAS TIGHTENING SIDE BOLT IN CRUSHER AT FINISHING PLANT WITH WRENCH AND SLEDGE HAMMER. THE HAMMER HANDLE HIT SOMETHING AND THREW THE HAMMER OFF BALANCE CAUSING IT TO STRIKE RIGHT INDEX FINGER.

WHILE DISASSEMBLING HYDRAULIC CYLINDER, IT SLIPPED & LANDED ON HIS LEFT RING FINGER - FRACTURE.

EMPLOYEE WAS CLEARING JAW CRUSHER WITH A BAR; IT GOT CAUGHT BETWEEN ROCKS AND MASHED HIS LEFT PINKIE FINGER.

EE WAS DISLODGING A ROCK FROM CONVEYOR. ROCK FELL & STRUCK RIGHT KNEE.

EE WAS CHANGING SCREENS ON THE SHAKER. WHEN HE REMOVED SCREEN, IT STARTED TO FALL. HE REACHED OUT TO CATCH IT, CUT HIS FINGER

EE WAS USING A 4X4 TO PRY IN AN UPWARD POSITION THE 4X4 BROKE CAUSING EE TO INJURE HIS BACK

EMPLOYEE WAS CLIMBING OFF CONVEYER AND STEPPED ON A ROCK AND TWISTED RIGHT ANKLE.

EMPLOYEE WAS HELPING A CO-WORKER WELD WHEN HE RECIVED FLASH BURNS TO BOTH EYES.

EE S FOOT GOT CAUGHT ON CHAIN ON BOTTOM STEP OF END DUMP TRUCK.

WHILE CUTTING TIP OFF OF SILICONE WITH UTILITY KNIFE, EE CUT HIMSELF IN THE CHEST.

LIFTED A ROCK TO UNSTOP FEEDER AND TURNED/TWISTED.