Buscar en el registro

Smashed long finger on left hand between metal and a magnet.

EE was opening the front window on the Excavator and it got stuck. As EE jerked it up real hard it slammed closed and got EE's right hand what was wrapped around the right side of the window frame and pinched EE's right index finger between the window and the metal frame, breaking it.

Removing a come along chain under extreme tension. Either the hook slipped or failed and mechanism snapped back and hit the bridge of nose and between eyebrows requiring stitches

Pulling the steel tubing through a hole when one side of the tubing went down and the other side went up smashing right index finger between the tubing and the catwalk.

Standard Threshold Shift after hearing screening

Standard Threshold Shift after hearing screening

Switching loaders w/another operator. The other operator got in the loader first - IE started down the ladder, lost EE's footing, tried to "catch self" with EE's left arm resulting in injury to the triceps muscle of the left arm.

Employee had a seizure and fell down on the shop floor and hit the back of head.

Pushing on the boom of a backhoe to line up a pin. Rupture of Achilles tendon occurred.

Unknown

While inspecting spuds/poles on Dredge, tripped on discharge pipe injuring arm and shoulder

While grinding on angle iron, hit back part of angle and shot grinder up and back hitting right arm

Employee was cleaning Dredge Ladder, another employee raised ladder, running injured employee's hand into block on dredge ladder.

A customer truck driver arrived at mine for sand. After untarping his trailer, he returned to cab of his truck, where he apparently suffered a heart attack. Yard LDR OPR observed the victim being slumped over the steering wheel and notified mine management. EMS was notified and bystander cpr was started. MSHA Inspector was on site and assisted with the report and the cpr.

While hooking up air hose to grease Jaw Crusher a rock flipped off and hit brim of hard hat, breaking brim and fracturing upper jaw, (no jaw surgery required)affecting nasal passage on that side of face and cutting lips.

While dismounting from a highwall drill, the EE injured his ankle contacting the ground, X-rays show it to be fractured.

While driving 980 Loader drove over pot hole and bottomed loader out, causing back pain.

While climbing from primary hopper, employee was holding onto angle iron that broke causing employee to fall 3' to 4' to the ground.

While picking up shaker with crane, got left hand caught between the crane and the shaker.

While doing maintenance on 990 Cat front end loader, employee slipped on ice and fell down the stairs on back of loader hitting head and fracturing right ankle.

While jerking on come-a-long on wash plant, right elbow popped out.

While fixing ramp with loader, the wheel dropped off on right side, jerking EE to left side and hit loader with his left shoulder.

While changing screen on crusher, EE got dust into his eyes.

While trying to untwist 8" water pump line, hose line twisted around employee.

While stepping down off water truck placed foot in a low area on ground, spraining ankle and causing back pain.

While attempting to put new bar in primary crusher, left middle finger got caught between bar and rotor.

While running loader hit solid material and had pain in lower back.

While closing crusher hood, slipped and fell.

While doing maintenance on Dozer, slipped on diesel fuel on track and fell onto right knee.

While cleaning crusher with jackhammer, while dislodging jackhammer, he felt lower back pain.

While stepping down ladder off the chips stacker, foot slipped, causing strain in back.

WHILE CUTTING METAL WITH 4 1/2" GRINDER WITH CUT-OFF WHEEL, WHEEL BROKE, CUTTING HIS FINGER.

WHILE WORKING AT PRIMARY CRUSHER, DROPPED A PIECE OF ANGLE IRON ON RIGHT INDEX FINGER.

WHILE CLEANING ON SURGE TUNNEL, LIFTED STEPS THAT WERE BENT AND TRIED TO STRAIGHTEN THEM, HURTING HIS BACK.

WHILE LIFTING OXY/ACETATE CART OUT OF BOAT, HURT LOWER BACK.

WHILE COMING DOWN THE LADDER ON LOADER, EE TWISTED ANKLE ON LAST STEP.

WHILE HITTING ON CROW BAR WITH HAMMER, A PIECE OF METAL FLEW UP INTO RIGHT EYE.

WHILE CLEANING OUT WASH PLANT SCREEN TOWER, ANOTHER EMPLOYEE HIT HIM IN THE BACK WITH A PIC AX.

WHILE HAULING ROCK FROM PIT TO CRUSHER IN HAUL TRUCK, HAUL TRUCK RAN INTO GRADER THAT WAS GRADING HAUL PIT ROAD IN PLANT.

WHILE GRADING HAUL PIT ROAD IN PLANT, HAUL TRUCK RAN INTO GRADER, CAUSING EMPLOYEE TO JUMP OFF GRADER.

WHILE WINCHING CABLE TO OPEN SHOOT, THE COG CAME LOOSE HOLDING WINCH HANDLE CAUSING HANDLE TO SPIN AROUND HITTING RIGHT INDEX FINGER.

WHILE INSTALLING BUCKET LINK ON 990 LOADER, SHOP CRANED RUBBED LOADER ARM DISLODGING DIRT ON ARM CAUSING DIRT TO GET INTO LEFT EYE.

WHILE WELDING, TORCH POPPED CAUSING METAL & DEBRIS TO FALL ONTO HEAD AND INSIDE SHIELD, LODGING IN RIGHT EYE.

WHILE GETTING UP ON THE CONVEYOR, EE SLIPPED AND HIT HIS RIBS ON THE CONVEYOR FRAME.

WHILE CLIMBING DOWN LADDER ON PRIMARY CRUSHER, 4TH STEP BROKE CAUSING EE TO FALL ON CRUSHER HITTING MIDDLE OF HIS BACK.

EMPLOYEE WAS INSTALLING UPPER ENGINE COMPARTMENT PANEL WHEN PANEL STUCK, THEN WHEN PANEL WAS FREED, IT CAME DOWN ON RIGHT HAND RING FINGER, CUTTING FINGER.

THE PLANT HAD AN ELECTRICAL OUTAGE, EQUIPMENT WENT DOWN, EE PUSHED DOWN ON THE DISCONNECT LEVER OF STARTE BOX AND BOX BLEW OPEN CAUSING BURNS TO HIS FACE AND NECK.

HURT BACK WHILE SHOVELING IN PLANT.