Buscar en el registro

EE parked the wheel loader he was operating at the shop to repair damaged hose. EE descended down the loader ladder too fast and slipped on the last step about 20 inches off the ground. EE jumped back and landed on his back. Weather conditions were rainy.

EE DUMPED LOAD OF STONE WITH HAUL TRUCK BESIDE STOCKPILE. WITHOUT FULLY LOWERING TRUCK BED, EE TRAVELED APPROX 400 FEET TOWARDS AN UNDERPASS. TRUCK BED CAME IN CONTACT WITH OVERPASS, CAUSING EE TO BE JOLTED IN CAB. EE HAD CUTS TO L. WRIST, L. HAND & UNDER LIP ON CHIN AND LOWER GUM; NICKS ABOVE R. EYE & R. EAR; TWO CHIPPED TEETH.

3 STITCHES REQUIRED EE WAS WORKING WITH ANOTHER EE AT STONE PROCESSING PLANT CHANGING WIRE MESH SCREENS ON THE VIBRATING SCREEN. EE TRIED TO HANDLE ONE SCREEN CLOTH BY HIMSELF RATHER THEN GET THE OTHER EE'S HELP. SCREEN CLOTH CUT EE ABOVE LEFT EYE.

EE WAS DESCENDING LADDER FROM PREMIX MIXER FLOOR TO BOTTOM FLOOR. HE STEPPED DOWN FROM LADDER & TWISTED HIS RIGHT KNEE.

JAM UP IN TUNNEL; EMPLOYEE WAS BENT OVER TO STRAIGHTEN BAGS UP AND LOST HIS BALANCE AND FELL BACKWARD THROUGH HAND RAILS.

LIFTED BAG OFF SPOUT AND TURNED, EE FELT SOMETHING GIVE IN HIS BACK.

EMPLOYEE WAS WORKING ON OPQ ELEVATOR DRAG PIT USING FIVE GALLON BUCKET TO CLEAN MATERIAL FROM PIT. PICKING UP THE BUCKET FULL OF MATERIAL HE TWISTED AND FELT PAIN IN BACK OF NECK.

EE WAS PERFORMING MAINT ON C102 CONVEYER BELT. AFTER FINISHING PUTTING IN BELT SPLICES HE PLACED RIGHT FOOT ON FRAME OF CONVEYER TRUSS. HIS FOOTSLIPPED AND HIS LEFT KNEE HIT THE METAL STRUCTUR E.

RAN A LOT OF PCL COLORS THAT USED LIME "S", CONTINUED BENDING AND LIFTING.

EE MISSED BOTTOM STEP WHEN EXITING TRUCK.

EE FELT PAIN IN LOWER BACK WHILE INSTALLING PLATE IN 26 BIN AT PORTABLE PLANT.

MATERIAL BUILT UP ON FAN GRILL-EE WAS WEIGHING UP PIGMENT AT BLENDING FACILITY WHEN HE INADVERTENTLY BUMPED THE FAN CAUSING MATERIAL TO GET IN EE'S EYES.

EE WAS TRYING TO PUSH THE DINKY CARS CLOSER TOGETHER TO CABLE WITH HIS LEGS.

EE WAS PACKING AT BLENDING WHEN BAG BLEW UP AND WENT IN BOTH EYES.

EE WAS CLIMBING DOWN OFF OF LOADER WHEN THE HANDRAIL HE HAD HOLD OF BROKE, CAUSING HIM TO FALL TO GROUND INJURING HIS ELBOW AND MUSCLES IN ARM.

WENT THROUGH MILL ROOM DOORS, TRIPPED OVER WPC HOSE LAYING IN DOORWAY.

WHEN PULLING FLOOR JACK OUT FROM UNDER TRUCK, EE FELT SHARP PAIN IN LOWER BACK.

EMPLOYEE NOTICED THE BAG ON THE SPOUT WAS NOT TRIPPING OFF, THE NEXT THING HE KNEW THE BAG EXPLODED INTO BOTH EYES.

LIFTING 50 LB. BAG TYPE S LIME FROM FLOOR TO BATCH BIN, UP 3' TO DUMP. EE FELT SHARP PAIN IN LOWER BACK.

HAND STACKING AT BLENDING & HURT LOWER BACK.

BAG ON PACKER BUSTED AND GOT INTO HIS EYES.

BAG ON PACKER BLEW UP AND GOT IN EYES.

BAG BUSTED WHILE PACKING-MATERIAL GOT INTO EYES.

EE WAS SHOVELING MATERIAL OFF OF ROOF AND GOT MATERIAL IN HIS EYES.

EMPLOYEE WAS ADJUSTING REJECT BELT WHEN LIGHT BOAG CROSSED CAUSING REJECT BELT TO TRIP, PINCHING EMPLOYEE'S LEFT ARM AND HAND BETWEEN REJECT BELT AND CHANNEL SUPPORT.

EE WAS LIFTING A BAG OF MORTAR OUT OF A DUMPSTER AND PULLED A MUSCLE IN HIS BACK.

A 10" PIECE OF DRILL STEEL FELL FROM HOLDING RACK AND HIT EMPLOYEE ON RIGHT SIDE OF HEAD. THE STEEL HIT THE EMPLOYEE ON HIS HARD HAT ON RIGHT SIDE.

2 SMALL HOPPER CARS WERE STUCK TOGETHER. EE TRIED TO PUSH AND PRY THEM APART AND IN DOING SO FRACTURE RT. RIBS.

STRAINED LEFT FOREARM WHILE PACKING.

HURT BACK WHILE PACKING AT COLOR PACK.

EE WAS TRYING TO PULL OPEN A SLIDE AND PULLED A MUSCLE IN HIS RIGHT SHOULDER

EMPLOYEE INJURED IS A MECHANIC WHO WAS REPAIRINGA HYDRAULIC DRILL BEING USED ON THIS MINE SITE. HE STRUCK HIS OWN LEFT POINTER FINGER WITH AN EIGHT POUND HAMMER.

EE WAS GOING OUT THE DOOR AND SLIPPED ON THE IRON GRATE THAT HAD A PIECE STICKING UP ON IT.

EMPLOYEE WAS WALKING AND STUMBLED, TWISTING HIS RIGHT ANKLE AT LIME FLOOR.

EMPLOYEE PICKED UP ALL THREAD BAR; BAR FELL ON MIDDLE FINGER OF LEFT HAND. AT THIS TIME, EMPLOYEE HAD NO PROBLEM WITH THE FINGER.

TANK WAS BATCHING INTO WEIGH HOPPER AND CLAM HUNG OPEN DUE TO A STONE, CAUGHT IN IT. WHEN HE TRIED TO DISLODGE THE STONE HIS THUMB WAS CAUGHT IN THE CLAM.

EMPLOYEE WAS CHECKING ELECTRIC PUMP WHEN HE SLIPPED ON BERM AND STRUCK LEFT KNEE ON ROCK.

LIFTING CEMENT BAGS FROM TOP OF PALLET, WHICH TWISTED IN PALLETIZER. EMPLOYEE FELT PAIN IN LOWER BACK.

AFTER LUNCH EMPLOYEE GOT UP FROM SEAT AND FELT PAAIN IN LOWER BACK.

EE'S JOB IS HE PUTS A BAG ON A SPOUT, HITS THE FILL BUTTON, THEN HE TAKES THE BAG OFF THE SPOUT AND PUTS BAG ON CONVEYOR. EE HAD COMPLAINED OF DISCOMFORT FOR A COUPLE OF WEEKS. NO SPECIFIC DAT E OF WHEN THIS DISCOMFORT STARTED.

EMPLOYEE WAS TIGHTENING BOLT WITH 1" IMPACT WRENCH, WRENCH JUMPED AND TWISTED RIGHT HAND AND WRIST.

DUMPING BAG OF PIGMENT INTO MIXER, TWISTED NECK.

WAS DUMPING A LOAD OF STONE INTO KILN. WHEN EE PULLED THE HOPPER BACK UPRIGHT HIS SHOULDER POPPED.

PUTTING A CARTRIDGE IN INK PEN. CARTRIDGE WOULD NOT GO IN PEN, PUT MORE PRESSURE CARTRIDGE PEN LIPPED END OF CARTRIDGE WENT THRU THE END OF LITTLE FINGER

PUTTING ONE BAG ON CONVEYOR AND WHEN HE TURNED BACK THE TOP OF THE OTHER BAG WHICH WAS STILL ON THE PACKED BLEW OUT MATERIAL GOING UNDER FACE SHIELD.

WHILE CHANGING ROCK BREAKER BIT, BIT DROPPED ON RING FINGER (RIGHT HAND)

WAS FIRING OFF A KILN - SMOKE GOT IN HIS EYES.

WAS GETTING OFF FORKTRUCK AND PULLED MUSCLE IN BACK.

EE WAS STEPPING OFF LADDER WHEN LADDER KICKED OUT FROM UNDER HIM. FELL APPROX 3 FEET.

EE WAS REMOVING RADIATOR CAP TO ADD WATER TO RADIATOR. WHILE REMOVING CAP, PRESSURE WAS BUILDING UP IN RADIATOR CAUSING CAP TO BLOW OFF SENDING HOT WATER ON EMPLOYEE.