Buscar en el registro

Employee was working to tighten belt. After completion, they missed a rung on the ladder and fell approximately 3-4 ft.

Employee was grinding a bolt off and had protective eye-wear on but it was windy day and employee got a foreign object in eye

Employee was replacing a bearing on the tailshaft of an auger. He hit his left index finger with a 2 pound hammer smashing it.

While replacing buckets on the 22 foot elevator employee slipped on loose sand on the ground catching his hand between the bucket and belt twisting his wrist. Diagnosis strained right wrist/Ulna-Carpal Ligament Strain. Ice pack for 30 minutes 3 to 4 times a day.

While dismounting the 966F Cat Rubber tired loader EE twisted his right knee. The treatment was to apply a cold pack for 30 minutes 3 to 4 times a day. No improvement was sent for MRI on 8-6-2013. This showed positive for mensical tear, awaiting authorization for specialist.

Dredge cutter chain came out of track. A chain come-a-long was secured to the cutter chain to reposition the links. The come-a-long chain slacked off, engineer reached under the water line to secure chain, the come-a-long chain slapped. 2.1 burst laceration to web between pinky and ring fingers. Prescrip. meds, stitches and drain to left hand. Mod. duty, no left hand work.

Laborer installing speed limit sign pinched right hand and thumb. Flesh wound and stitches.

Engineer operating rubber tire loader noticed bloodshot left eye and cloudy vision. First doctor left eye abrasion-foreign body, second doctor superficial irritation to cornea. Final visit 06/20/2011 because no doctor on weekend, released with rx prescription but no restrictions 06/16/2011.

This operator took another out to the dredge by jon boat. His return trip was abruptly stopped by a sand bar. He lunged forward and caught his foot in a bottom boat bow, wrenching his back. Sent to doctor for lumbar strain, muscle spasms. Doctor placed him on modified duty. Tough to not reach or stoop or bend on any sand plant job. He stays at home and gets physical therapy.

EE was loosening bearing bolt on dredge hull pump. Backed up and hit right rear rib cage just below shoulder. Contusion Posterior rt ribs 3 to 8 Contusion Strain Thoracic Spine Muscles.

Operating engineer minimally sprained his right ankle walking down a set of stairs which bridge a conveyor. The doctor told him to put ice on it and gave him OTC medication, scheduled follow-up appt. for 10-23-2009. EE worked his next scheduled shifts without incident. Doctor then prescribed physical therapy at follow-up appt. 3 x a week to last for week and a half.

Walking on an uneven concrete floor, turned right ankle, inversion sprain rt ankle - minimal to mild, went to doctor 04/28/2009 7 am, full duty, wear ankle support, ice pak, OTC pain medication, follow-up visit 05/01/2009 2:30 pm.

EE, Engineer, was measuring river dredge on a loboy trailer. He was stepping down and slipped on ice. He notified the Safety Director, who sent him to medical clinic. The dr. diagnosed Lt SIJ Strain (back strain), prescribed a pain medication, ice pak treatments, and Moderate Duty. He scheduled an appointment for 1-27-09. EE returned to work.

Operator removed guard to clean the steel tire of a rotary sand drying drum. The operator was holding a rag on the tire while it was running. His two finger tips were smashed between the moving steel rollers. KU Med doctors amputated the distal tips of both his ring finger and middle fingers on his left hand. The bandages will be on for at least another week.

Mechanic replacing a cutting edge on a 966 cat rubber tire loader. Held blot head and air wrenched the nut, the bolt spun in his right hand causing a laceration to right index finger. 3cm wide, 7 stitches

Carrying throughing roller unit on conveyor catwalk, unit got caught on conveyor frame. Right shoulder pulled down.

5 men were butt welding 10" steel together. Two men were attempting to signal when the joint was closed. One pipe @ 450' was positioned atop a 3' foot concrete knee wall. A short pipe was being lifted into position with a trac hoe. One pipe sprung, falling onto the left leg of injured.

INITIALLY, EMPLOYE TOLD GEN.MGR. HE THOUGHT HE GOT HURT BUT DID NOT KNOW WHEN OR WHERE. HE WAS GOING TO HIS DR. TO FIND OUT WHAT WAS WRONG. HE WAS DIAGNOSED WITH A DOUBLE HERNIA. EMPLOYEE NEVE R SAID MORE - WAS NOTIFIED BY MAIL BY DR. THAT EMPLOYEE WAS OPERATED ON FOR DOUBLE HERNIA. THE EMPLOYEE THEN REPORTED ACCIDENT WHILE PICKING UP STEEL & PULLING CABLES.

EE WAS ADJUSTING COUNTERWEIGHTS ON A MOTOR WHEN THE WEIGHTS SUDDENLY REVERSED DIRECITON WHEN HIS WRENCH SLIPPED. THE ELECTRIC MOTOR WAS LOCED OUT BEFORE HE STARTED ADJUSTING THE COUNTERWEIGHT SO NOTHING STARTED OR KEPT GOING HIS RIGHT RING FINGER WAS PINCHED IN BETWEEN COUNTERWEIGHT AND MOTOR FRAME HOUSING NEEDED SUTURES.

INJURED WAS STANDING UNDERNEATH A 10" PIPELINE ATTEMPTING TO PATCH THE LINE WITH A 2 1/2 FOOT 1 /2 10" PIPE SECTION. ONE SIDE WAS SECURED WITH A CHAIN CLAMP. WHILE ATTEMPTING TO SECURE OTHER CHAIN. INJURED SLIPPED ON MUD, FELL UNDER PIPELINE, MAKING HIS LEG A TARGET FOR THE PATCH THAT ALSO SLIPPED DURING THE FALL. THE PATCH SRUCK HIS RIGHT LEG CAUSING LACERATION AND CONTUSION.

INJURED THE DISTAL PHALANX ON HIS RIGHT HAND WHILE ATTEMPTING TO START AN OUTBOARD MOTOR.THE PULL ROPE FORCED HIS AHND BACK INTO THE MOTOR CASUING WHEN THE ENGINE RECOILED.NO WORK TIME WAS LOS T.

INJURED WAS REPAIRING A CONVEYOR BELT,LOST HIS FOOTING AND SLIPPED WHILE USING A UTILITY KNIFE.THE KNIFE,HELD IN HIS RIGHT HAND SLIPPED AND CUT HIS LEFT ARM.HE IMMEDIATELY WENT TO EMERGENY ROO M WHERE HE RECEIVED 4 SUTURES.HE RETURNED TO WORK.TYLENOL PRESCRIBED.

INJURED STEPPED ONTO A RIVER DREDGE LINE PONTOON. IT WAS RAINING AND HIS BOOTS WERE MUDDY. THE PONTOON WAS AT THE SLIGHT ANGLE AND HE LOST HIS FOOTING, FELL, CAUSING A CONTUSION TO HIS LEFT LEG. HE WENT TO THE DOCOTOR WHO PRESCRIBED MEDICATION.

HE WAS GRINDING ON METAL HE WAS WELDIGN. WHILE WEARING MANDATORY SAFETY GLASSES HE RECEIVED A SMALL PARTICLE OF METAL IN HIS EYE AT THE CLOSE OF HIS SHIFT. HE WAS INSTRUCTED TO RECEIVE MEDICAL CARE. HE TRIED TO WASH IT OUT BUT DID NOT SUCCEED. HE RECEIVED MEDICAL ATTENTION.

WHILE GRINDING, SMALL PIECE OF METAL BOUNCED OFF WALL AND BACK BEHIND THE SAFETY GLASSES HE WAS WEARING. METAL EMBEDDED IN RIGHT IRIS, RUSTED AND HAD TO BE SCRAPED OUT. NO OTHER DAMAGE NOTED. HE RECEIVED MEDICAL ATTENTION.

SMALL PIECE OF METAL GOT IN RIGHT EYE WHILE USING CUTTING TORCH OR OTHER EQUIPMENT.

MIDDLE FINGER ON L HAND CUT WHEN SHAFT FELL ON IT

LEFT THUMB WAS CUT LENGTHWISE APPROXIMATELY 1 1/2" IN LENGTH.REQUIRING STITCHES.HOLDING WRENCH THUMB GOT CAUGHT BETWEEN WRENCH AND PIPE.WAS CHANGING BLOWER ASSEMBLY UPSTAIRS IN DRYER.

ELECTRICAL FIRE ON MORRIS DREDGE DOUBLE PHASE TO GROUND FAULT.