Buscar en el registro

WHILE LIFTING FAN HE SLIPPED STRIKING LEFT FOOT.

WHILE CARVING OUT A NOTCH IN WOOD FOR A ROOF RAFTER, THE KNIFE SLIPPED FROM EE'S RT. HAND STRIKING THE LT. MIDDLE FINGER.

EE WAS USING A FORKLIFT TO TURN OVER A PLANETARYSO THAT HE COULD PLACE NEW GEARS INTO IT. WHILE MOVING PLANETARY ON FORKS, THE PLANETARY FELL INBETWEEN FORKS DROPPING ONTO EE'S RIGHT FOOT.

WHILE EE WAS MOVING A 20"X 12"X 2" PIECE OF PLANK FROM A RACK, THE EMPLOYEE THAT WAS HELPINGHIM SLIPPED CAUSING PLANK TO BOUNCE ON GROUND & STRIKE EE ON SIDE OF FACE.

EMPLOYEE'S RIGHT FOOT SLIPPED INTO A GAP NEAR MOTOR ON SCREEN CAUSING HIM TO STRAIN HIS LEFT KNEE.

WHILE CLEANING OUT FEEDER II WITH AIR GUN, THE AIR LINE GOT PULLED INTO THE HEAD SECTION OF #13BELT. EMPLOYEE COULD NOT RELEASE THE AIR LINE QUICKLY ENOUGH & HIS ARM WAS PULLED IN BETWEEN THE HEAD SECTION OF BELT.

WHILE STANDING BENEATH BELT CLEANING AND LOOSENING CONCRETE, PIECE OF CONCRETE FELL ONTO EMPLOYEE.

WHILE OEPRATING 80 TON HAUL TRUCK, TRUCK CAUGHT FIRE, EMPLOYEE LEAPT FROM TRUCK.

WHILE REMOVING BOOM STOP PIPE FROM DROP BALL, PIPE SLIPPED CAUSING LACERATION AND FRACTURE TO TIP OF EE FINGER.

WHILE TIGHTENING CAPS ON SPRAY PIPES, 2" PIPE WRENCH SLIPPED FROM HAND HITTING LEFT EYE BROW.

WHILE CLEANING THE DASHBOARD OF A TRUCK, EE DID NOT SEE A RAZOR BLADE ON THE DASHBOARD AND CUT HIS FINGER.

WHILE REMOVING A BELT CLAMP, AFTER SLICING A BELT, IT BECAME HUNG UP ON A IDLER. AS THE IDLER WAS BEING CUT OUT WITH A TORCH TO RELIEVE PRESSURE, BELT CLAMP FELL OFF, PINCHING THUMB AGAINST F RAME.

WHILE CLEANING THE WINDOW OF THE LOADER, SUPERVISOR CALLED TO EE HE LEANED FORWARD TO HEAR HIM AND SLIPPED OFF LOADER

WHILE LIFTING OUT SCREEN, FINGER GOT CAUGHT BETWEEN SCREEN & CRANE BODY

WE SET UP FOR BLAST SECURITY. WE SET AN EE AT THE OUTSIDE BLAST PERIMETE ABOUT 1500'. WHEN THE SHOT WENT OFF, ONE ROCK CAME OUT OF THE SHOT (32#). WHEN THE EE SAW THE ROCK, IT BOUNCED DOWN THE RAMP TOWARD HIM, WENT THROUGH THE PASSENGER SIDE WONDOW & STRUCK HIM IN THE LEG.

WHILE CUTTING A PLATE OF STEEL THE ACETYLENE HOSE HAD A PIN HOLE LEAK INTO GLOVE & SPARK WENT TO GLOVE & BURNED HIM.

WHILE RE-ROUTING A PIPE WORKER INSTRUCTED HELPER TO CUT ALL THE WRAPS WITH WIRE CUTTERS, WHILE THE EMPLOYEE CUT THE ONE INF RONT OF HIM WITH UTILITY KNIFE.

WHILE CLEANING OUT CRUSHER EMPLOYEE STRUCK ELBOW AGAINST/ SIDE OF CRUSHER.

WHILE CLEARING STONE FROM AROUND SCREEN A FOOTBALL SIZE ROCK FELL ON HAND.

WORKING ON SCREEN DECK, PRYING SCREEN OUT STRUCK FACE.

REMOVING CONCSVE PLATE FROM CRUSHER, DRIVE A WEDGE BEHIND PLATE & POP LOOSE & REMOVE WITH CRANE.

EMP CLIMBED UP ON A CONVEYOR TO TIGHTEN A NUT. EMP DID NOT WEAR A SAFETY BELT. SLIPPED AND FELL TO GROUND 8' BELOW. CRACKED 2 RIBS AND SPRAINED KNEE.

EE WAS CLIMBING ON A CONVEYOR AND SLIPPED AND CUT ANKLE ON FRAME OF CONVEYOR

EE WAS USING A PRY BAR TO PRY A SCREEN. THE BAR SLIPPED HIS RIGHT HAND STRUCK THE SCREEN CAUSING A LACERATION OF THE RT THUMB-REQUIRED SUTURES

EE WAS CUTTING 6" TUBES FOR DRILLED HOLES USING A UTILITY KNIFE. EE BRACED TUBE ON LEG AND CUT TOWARD HIMSELF. THE KNIFE SLIPPED AND STABBEN INTO KNEE

EMP WAS CLIMBING ON LATTICE FRAME CONVEYOR DURING INITIAL CONSTRUCTION PHASE. THERE WERE NO CAT WALKS INSTALLED ON THIS CONVEYOR AT THE TIME OF THE ACCIDENT. THE CAT WALK WAS COMPLETED SHORTLY AFTER THE INCIDENT. EMP HAD PREEXISTING KNEE PROBLEMS WHICH WAS EXACERBATED BY THE ACTIVITY.

EMPLOYEE WAS STANDING BY A PORTABLE CEMENT MIXERWHICH WAS BEING PICKED UP BY A FORKLIFT. THE MIXER WAS FROZEN TO THE GROUND AND IT BROKE FREE AND JUMPED AT THE WORKER HITTING HIM IN THE BODY A ND RIGHT FOOT.

WHILE DEBURRING, THE EMPLOYEE PULLED THE TOOL TOWARD HIS LEFT HAND. IT SLIPPED OFF OF THE WORK AND CUT THE PALM OF THE LEFT HAND BELOW THE THUMB

WORKER WAS MOVING DRUM OFF OF PALLET WHEN HE FELT PAIN INBACK. WORKER DID NOT USE DRUM HANDLING EQUIPMENT PROVIDED AT THIS LOCATION.

WHILE STEAM CLEANING A TRUCK, THE EE PASSED THE STEAM WAND OVER HIS RUBBER BOOTS. THERE WAS A SMALL PINHOLE IN THE BOOT WHICH ALLOWED THE PRESSURIZED STEAM TO ENTER AND CONTACT THE SKIN ON HIS FOOT.

EMPLOYEE TWISTED HIS BACK WHILE CLIMBING OUT OF A SCREEN DECK. EMPLOYEE DID NOT REPORT OR SEEK MEDICAL TREATMENT UNTIL 8-22-95.

EE WAS CUTTING BELTING WITH A RAZOR KNIFE TO OMAKE A SPLICE WHEN HE SLIPPED AND WITH HIS ARM. HE RECIEVED FIVE SITCHERS.

UNLOADING RUBBER BELTING FROM A FLATBED TRUCK EMPLOYEE NOTICED PAIN IN LEFT GROIN AREA

WHILE REMOVING A DRIVE SHAFT UNIVERSAL JOINT, EMPLOYEE WAS STRUCK IN LEFT ARM WITH A PIECE OF METAL WHICH BROKE OFF OF U-JOINT WHEN STRUCK WITH HAMMER.

PULLING STEEL OFF A SHELF, HIS FOOT HIT A PIECE OF STEEL. THE STEEL FELL OVER AND HIT HIS FOOT- FRACTURING HIS TOE THROUGH HIS SHOES.

WHILE LOADING PRIMARY SCREEN ONTO A FLATBED TRUCK A SCREEN SLIPPED & SKID OFF THE STACK MAKING CONTACT WITH THE TOP FRONT OF THE ANKLE

EMPLOYEE WAS STRIPPING THE CASING OFF FROMA PIECE OF WIRE WHEN HE SLIPPED W/THE KNIFE, CUTTI GHIS FINGER. THE WEATHER WAS VERY COLD CAUSING HTE CASING TO BE ANORMALLY HARD. EMPLOYEE RECEIVED 4 SUTURES, BUT RETURNED TO WORK AS AN ELECTTRICIAN.

EMPLOYEE WAS WALKING IN THE MILL WHEN HE TURNED HIS HEAD. THERE WAS A PIECE OF METAL STICKING OUT THAT HAD BEEN DISCARDED & WAS FROZEN TO THE TOP OF A CONVEYOR FOUNDATION. THE EMPLOYEE LACERAT ED HIS LIP ON THE METAL.

EE WAS CUTTING W/A BAR SAW. HE SET THE SAW SO THAT IT WAS NOT SUPPOSED TO MOVE. HE THEN REACHED OVER TO GRAB A PART WHEN THE SAW CONTINUED TO COME DOWN AND HIT HIS FINGER. IT IS A HORIZONTAL B AN SAW WHICH WAS FOUND TO HAVE DEFECTIVE HYDRAULICS.

EMPOYEE HIT HIS THUMB WITH A HAMMER CAUSING HIS SKIN TO SPLIT OPEN. HIS SKIN WAS VERY CALLOUSED AND DRY. HIS INJURY REQUIRED HIM TO HAVE STITCHES.

EE WAS CLEANING MUD FROM A TAIL SECTION ON A CONVEYOR. THE CONVEYOR HAD STOPPED DUE TO EXCESSIVE RAIN AND MUD ON BELT. WHILE EE WAS STANDING AT REAR OF CONV. MUD SLID DOWN THE BELT. THE MUD PI LED UP AROUND THE CALVES OF THE EE. EE THEN TWISTED HIS KNEE WHEN HE TURNED.

WHILE TIGHTENING A BOLT ON A 6" WATER LINE, WRENCH SLIPPED OFF AND EMPLOYEE STRUCK ELBOW ON PIPE.

EE BURNED HIS RIGHT PALM WHEN HE ACCIDENTALLY PUT HIS HAND DOWN ON A PIECE OF HOT METAL THAT HE HAD JUST PREVIOUSLY CUT WITH A CUTTING TORCH.

EMPLOYEE WAS ENTERING LOADER CAB WHEN HE LEFT A PULL IN HIS GROIN AREA.

EMPLOYEE STEPPED OFF FROM A WORK PLATFORM 6 FEET ABOVE THE GROUND ON A PORTABLE SCREENING PLANT. HAND RAILS WERE MISSING ON THE PLATFORM.

EMPLOYEE HAD JUST FINISHED A REPAIR ON A CONVEYOR. A FRONT END LOADER WAS BEING USED TO SUPPORT A SECTION OF THE CONVEYOR WHILE THE EMPLOYEE WELDED IT TO THE REST OF THE FLAME. THE EMPLOYEE WAS USING THE MAIN CONVEYOR SECTION AS A WORK PLATFORM (SEE ATTACHED).

EMPLOYEE SLIPPED ON ICE IN MILL AREA WHILE CLEANIN GUP AT THE END OF HIS SHIFT. WORK AREAS HAD BEEN SANDED HOWEVER THIS PARTICULAR AREA HAD NOT.

EE WAS GRINDING A DRILL BIT WHEN DEBRIVE FLEW INTO EE EYE. THE EE WAS WEARING SAFETY GLASSES AND FACE SHEILD. A PRESCRIPTION WAS GIVEN TO EE WHICH MADE IT REPORTABLE NO SCHEDULED WORK ON 12-24 -93.

EMPLOYEE SLIPPED ON THE ICE AND STRAINED HIS RIGHT KNEE.

EMPLOYEE WAS SHARPENING A BIT FOR THE DRILL RIG WHEN A PIECE OF RUST BECAME IMBEDDED IN HIS EYE. THE EMPLOYEE WAS WEARING SAFETY GLASSES AT THE TIME. NO FACE SHIELD. EMPLOYEE WAS GIVEN PRESCRI PTION EYE DROPS TO PREVENT INFECTION.