Buscar en el registro

Operator slipped while working on a sheave. This resulted in them falling and the sheave falling causing a cut on their left leg.

Employee rolled their right ankle while walking around plant.

Trying to put tail pulley on truck that was hanging from a truck mounted crane. Cut left pinky finger on a jagged edge of tail pulley.

equipment operator slipped on the steps of a 980H loader. Fell back tried to catch himself, resulting in a broken left wrist.

While drilling on a sheet of steel victim got small sliver of metal embedded in his right eye. The victim was wearing safety glasses at the time , however it was breezy in the area he was working. Once he felt the sliver he irrigated his eyes at the eye wash station, and he thought he had removed the problem. Several days later his right eye was red, itchy and very watery.

Employee twisted his knee on 12/9/2013 while working in the plant but thought it was fine (First Aid only). He reported it to the Manager and returned to work that day. On 2/19/14 employee informed the Superintendent that his knee was not healing. He was transported to the clinic at that time where the physician recommended physical therapy.

Employee was stepping off the tag axel on the portable jaw and twisted his knee.

EE was handling screen to another employee while standing on screen deck. The weight of the screen shifted pinching EE's finger between wire cloth on screen and metal bar on rock box.

Was holding up inspection door to surge hopper with right hand. When done inspecting, his hand gave out causing door to slam down onto left hand. Injury refused to have his hand checked out immediately but since it would not stop hurting he decided to have it looked at today, 11/30/09. The doctor said it was broken and he is now in a cast and on restricted duty.

Swelling of the right elbow while replacing eye wash station. Thought it was a spider bite. Next morning bruising started on the arm so went to the clinic. The clinic concluded that it was a contusion, was given a prescription for an antibiotic.

Employee was cleaning up around screen #2 with equipment #56 and flying debri landed in his right eye.

Injury was spinning the head of the cemco & other employee was using an air gun when his finger got stuck between the head of the cemco & the air gun socket.

EE was climbing back into the loader and slipped on the step and gashed his shin open.

Employee was pulling the welder trailer out of the tool van and the tires dropped off the 6" elevated floor. Pushed forward running up on his left ankle and pushing him into the scraper can smashing his right hand.

Unload tail guard from pickup and was dragging it to the conveyor. Tripped on something and hurt back/right shoulder catching himself as he fell.

Area is muddy due to significant rain. Employee was cleaning under the pit belt feeder by shoveling out the material. His foot slipped in the mud while shoveling and he twisted his back. Employee transported to Doctor who indicated that he was unable to return to work.

Pulling top deck screens off for replacement and screen hung-up when pulled. Incident not initially reportable, employee then transferred to mine ID # 0401846 (Waterford) where he then aggrivated injury. Placed on restrictive duty on October 6, 2005.

CHANGING V-BELTS AND HIS LIP MADE CONTACT WITH GUARD. CONDITIONS WERE GOOD, DAYLIGHT & 50DEG. TEMP.

EMPLOYEE JUMPED BACKWARDS OFF CONVEYOR APPROX 4-5 FEET OFF GROUND & STRUCK A SIGN FOR NO FOOT TRAFFIC WHEN PLANT IS RUNNING STUCK HIMSELF IN REAR END AREA.

WHILE PRYING OPEN FEEDER DOOR, A BIG ROCK CAME OFF OF THE TOP AND STRUCK EE'S RIGHT WRIST.

EE WAS ON THE DECK OF THE DREDGE AND A ROCK FELL OFF THE GRIZZLEY AND HIT HIM IN THE HARD HAT. (HEAD) HE WAS WEARING A HARD HAT.

EE WENT HOME EARLY FOR A DR'S APPT. NEXT DAY HIS WIFE CALLED & SAID HE WAS IN HOSPITAL BECAUSE HE HAD A HEART ATTACK.

WHILE OPERATING LOADER, EE HIT A BUMP AND THE SEAT BOTTOMED OUT AND INJURED HIS LOWER BACK.

EE STRUCK FINGER ON ANGLE IRON WHEN USING SLEDGE HAMMER TO UNPLUG FEEDER.

REMOVING MATERIAL FROM CONVEYOR BELT EE LOST BALANCE AND JUMPED TO GROUND. UPON IMPACT TO GROUND EMPLOYEE INJURED HEEL.

WHILE CUTTING FLASHING WITH BLADE KNIFE, SLIPPED AND CUT FINGER LEFT INDEX FINGER.

WHILE WORKING ON ELECTRICAL PANEL CUT FINGER ON SHARP EDGE

WHILE TRYING OFF DREDGE ROPE, HAND GOT TANGLED IN ROPE AND WAS CUT.

EE CLIMBED OVER HANDRAIL AND WAS STANDING ON CONVEYOR FOOT GOT CAUGHT IN TAIL PULLEY.

WHILE TURNING CUTTING EDGE ON SCRAPER, CUT BACK OF LEFT HAND ON MOLDBOARD.

WHILE CLEANING OUT UNDER A BELT DISCHARGE TO WASHDECK, A LARGE CHUNK OF MATERIAL FELL OFF BELT &STRUCK EE ON THE HEAD

WHILE WORKING AN AN ELECTRIC MOTOR, THE LBOCK HOLDING THE MOTOR SLIPPED ALLOWING IT TO FALL ON EE S THUMB.

WHILE PULLING OVERSIZED ROCKS OFF CRUSHING BELTLINE, STRAINED BACK MUSCLES.

WHEN CLIMBING OFF THE EXCAVATOR EE SLIPPED A LADDER 7 FELL TO GROUND CUTTING THE BACK OF HIS HEAD.

WHILE DIGGING WITH SHOVEL UNDER PUMP AT PIT, STRAINED BACK.

WHEN PUTTING A PIECE OF GRADING ON CATWALK GRADING SLIPPED & CUT ARM

WHILE ATTEMPTING TO HOOK WIPER ARM TO TENSION SPRING IT SNAPPED BACK INTO THE PALM OF LEFT HAND AND CUT HAND.

EMPLOYEE WAS UNDER TELSMITH CRUSHER USING AN AIR IMPACT WRENCH REMOVING DRIVE GEAR. THE TOOL SLIPPED OFF OF IMPACT & SPUN INTO LEFT HAND INDEX FINGER.

CLIMBING OFF LOADER & PULLED MUSCLE IN BACK.

WHILE CLIMBING DOWN FROM SCRAPPER, SLIPPEN ON STEP AND FELL TO GROUND ON RIGHT HIP.

WHILE OPERATING DOZER, JARRED SEVERAL TIME DUE TO PROBLEMS WITH SEAT BE BOLTED PROPERLY. HIS BACK BECAME SORE.

WHILE CLEANING OFF CRUSHER SAND CONVEYOR, RIGHT HAND STRUCK WIPER & CUT & POSSIBLE BRAKE MIDDLE FINGER.

EE SLIPPED AND LOST FOOTING WHEN STEPPED ONTO LADDER OFF OF CRUSHER BELT FELL AND LANDED ON WRIST.

A COMPACTED CLAY LUMP FELL FROM THE FEED CONVEYOR WHEN HE WAS WORKING UNDERNEATH AND HIT HIS RIGHT ANKLE CAUSING A CONTUSION TO RIGHT FOOT.

WHILE SHOVELING UNDER CONVEYOR, BENDING OVER HE TURNED TO LOOK UP TOWARDS A NOISE & FELT A SHARP PAIN IN BACK.

I NAME WAS ATTEMPTING TO FREE BOLT & NUT OF FLASHING CLAMP WHEN BOLT BROKE CAUSING HIM TO LOSE BALANCE FALLING 3 1/2 FEET OFF OF LADDER ONTO CEMENT SLAB

INJURED WAS TESTING FOR ELECTRICITY WITH INSTRUMENT SET ON OHMS.THIS CREATED A DEAD SHORT OF 480 VOLTS WHICH ARCHED CAUSING A BRIGHT FLASH AND EXTREME HEAT,WHICH CAUSED FLASH BURNS TO THE EYES AND BURNS ON LEFT HAND.

WHILE REPLACING ONE OF THE ROLLERS ON THE CONVEYOR I NAME SMASHED HIS FINGER IN THE FRAME BETWEEN THE ROLLER RESULT WAS AN INFECTION & FRACTURE OF HIS LEFT MIDDLE FINGER

REMOVING HYDRAULIC PUMP #22 PETTIBONE CRANE,MOTOR SLIPPED OUT OF HAND AND FELL ON RIGHT LEG.

I NAME CRUSHER OPERATOR WAS HELPING I NAME PUT PULLEY BACK ON ELECTRICAL MOTOR TO THE FEED BELT WHEN MOTOR MOUNT BOLT BECAME LOOSE CAUSING IT TO FALL DOWN ON LEFT FOOT MOTOR WEIGHS ABOUT 300 L BS