Buscar en el registro

I.NAME STEPPING DOWN INTO EXCAVATED AREA OF STREET WITHIN PLANT WHEN SOME LOOSE MATERIAL GAVE WAY CAUSING EMPL TO TWIST ANKLE AND FALL.

EMPLOYEE WAS USING AIR LANCE TO CLEAN BEAMS WHEN HE GOT DUST INTO HIS LEFT EYE.

EMPLOYEE STATES WHEN LIFTING SHAFT FROM WORK BENCH ONTO TWO WHEEL TRUCK HE STRAINED H IS SHOULDER & BACK

EE WAS SHOVELING DUST AND WHEN HE TURNED TO THROW DUST ON DRAG CONVEYOR HE INJURED HIS BACK.

EMPLOYEE WAS USING A GRINDER TO CLEAN CEMENT COOLER WHEN GRINDER SLIPPED CAUSING HIM TO CUT HIS FINGER.

HE WAS LIFTING A CRANE SHAFT CAUSING A STRAIN TO HIS BACK.

EE STATES THAT WHEN PULLING OPEN SLIDE GATE THE GATE PULLED ALL THE WAY OUT AND CAUGHT HIS FINGER BETWEEN THE GATE AND THE HANDLE.

EMPLOYEE ALLEGES THAT WHILE HE WAS GRINDING A STEEL RING WITH THE DISC GRINDER, SMALL PIECE OF METAL FLEW INTO HIS LEFT EYE.

EMPL PICKING UP SCRAP STEEL AND PLACING IT IN BUCKET OF FRONT END LOADER,PULLED MUSCLE IN LEFT SHOULDER.

EMPL STEPPING OFF LOADER ONTO SLOPING GROUND,TWISTED ANKLE.SAW DR 8-27-92.

54736YEE ALLEGES T HAT WHILE USING SAFETY KLEEN TO CLEAN THE #5 COAL AUX OIL TANK HE BECAME ILL

EMPLOYEE STATES HE SLIPPED ON CLINKERS AT THE END OF THE 159 BELT TUNNEL TWISTING HIS BODY & CAUSING HIM TO HIT HIS ELBOW AGAINST A STEEL LADDER DID NOT SEE PHYSICIAN UNTIL 09-03-92

95465ING DUST COLLECTOR TUBES WITH PIPE WRENCH PAIN IN AGDOMEN

54736YEE WAS SHOVELING MATERIAL INTO A WHEELBARROW WHEN HE INCURRED A STRAIN TO HIS BACK.

54736YEE ALLEGES THAT WHILE INSTALLING GEAR BOX COVER, HIS FINGER WAS PINCHED BETWEEN THE CHAINFALL HOOK AND THE GEAR BOX, MASHING HIS LEFT RING FINGER.

54736YEE WAS REMOVING GAS TORCH FROM #5 KILN AND BURNED THE PALM OF HIS RIGHT HAND.

EMPLOYEE WAS MOVING PALLETS AND A BARREL AT THE #9 FINISH MILL TO MAKE SPACE TO UNLOAD METHOCEL WHEN HE STRAINED HIS BACK.

EMPLOYEE WAS ATTEMPTING TO FREE DUST BUILDUP TO GET IT TO FEED FROM TANK. MATERIAL BROKE LOOSE AND GOT INTO EMPLOYEE'S RIGHT EYE.

EMPLOYEE WAS USING A WATER HOSE TO CLEAN TRACKS ON A BULLDOZER WHEN MATERIAL BLEW BACK INTO FACE.

EE WAS HOLDING BOTTOM OF OIL LINE ALREADY CUT LOOSE EE WAS CUTTING TOP LOOSE APPROX 10FT ABOVE EE WHEN EE CUT PIPE LOOSE CUTTER SLIPPED HITTING EE ON ARM CUTTING EE RT LITTLE FINGER & MIDDLE F INGER

EMPLOYEE ALLEGES WHILE MOVING BAGS OF CEMENT TO PALLETS HE INJURED HIS BACK.

I.NAME ASSISTING BELT TENDERS IN INSTALLING 27' X 30" ENDLESS BELT.I.NAME SHOVING BELT OVER HEAD TRACTION OF FEED WITH HANDS WHEN EMPL STRAINED RIGHT THUMB.DIDNT SEE DR UNTIL 5-28-92.

HOSE CAUGHT ON CHUNCK OF MATERIAL KICKED BACK STEEL HANDLE ON HOSE STRIKING HIM IN MOUTH

CRANKING LANDING GEAR ON TRAILER HANDLE SLIPPED AND SPUN BACK STIKING BACK OF L HAND

INJURED WAS PLACING MOTORS IN STORAGE AT UPPER WAREHOUSE.HE STEPPED ON A PIECE OF WOOD IN IT.THE NAIL PUNCTURED INJUREDS SAFETY BOOT AND FOOT.

PALLETIZER THREW BAGS OF CEMENT ONTO FLOOR EE WAS REMOVING BAGS FROM FLOOR AND PLACING THEM ON PALLET WHEN SHE STRAINED HER BACK.

VACUUM HOSE ON SUPER SUCKER WAS PUSHED INTO A PILE OF MATERIAL,CAUSING IT TO SURGE AND JERK EMPLOYEES NECK AND BACK.DID NOT SEE PHYSICIAN UNTIL 02-18-92.

EMPLOYEE WAS CUTTING RUSTED METAL WITH OXYGEN/ACETYLENE TORCH WHEN SLAG FLEW INTO EMPLOYEE'S EYE.

EMPLOYEE STEPPED OFF OF STREP LADDER & FELT A STINGING IN HIS RT KNEE DID NOT SEE PHYSICIAN UNT IL 01-22-92

EMPLOYEE PLUGGED IN AN ELECTRIC HEATER AND THE PLUG AND THE RECEPTACLE BLEW UP.

EMPLOYEE WAS WALKING THROUGH SHOP WITH ROLLER HOOKED UP TO TWOMOTOR HE STEPPED ON A 4 X4 BLOCK AND TWISTED HIS KNEE.

EMPL HOLDING A LINE-UP PIN WITH LEFT HAND WHILE ANOTHER EMPL BUMPED IT INTO PLACE TO LINE UP LINKS BEING INSTALLED IN TRAVELING GRATE.G HAMMER MISSED PIN MASHING I.NAME LEFT MIDDLE FINGER.

EMPLOYEE WAS OPERATING JACKHAMMER ON 24' CURB AT #5 COOLER WHEN HE LOST HIS BALANCE AND FELL. THE JACKHAMMER LANDED ON HIS CHEST.

EMPL PUNCHING CHUNKS FROM WASTE DUST TANK,STRUCK HAND AGAINST METAL ELEVATOR SHAFT.

EMPLOYEE WAS ROLLING OLD SCREW OFF HANDTRUCK WHEN HE STRAINED HIS SHOULDER AND NECK MUSCLES.

INJURED WAS CLEANING MATERIAL FROM PRECIPITATOR DUCT WHEN HE STRUCK HIS ARM AND METAL PLATE CAUSING LACERATION TO FOREARM REQUIRING 4 STITCHES. RIGHT FORARM.

EMPL WAS LOOSENING BRAKE ON RAIL CAR WHEN HE PULLED MUSCLE IN BACK.

INJURED WAS REMOVING HEAT EXCHANGER FROM GD COMPRESSOR #3.INJURED SLIPPED AS HE AND ANOTHER EMPLOYEE WERE CARRYING OLD EXCHANGER OUT,CAUSING INJURED TO TWIST HIS BACK.

EMPL WAS KNEELING DOWN TIGHTENING A BOLT,RAISED UP AND HIT HEAD ON BRACKET.

CHIPPING HOT SLAG FROM STEEL PLATE WITH CH IPPING HAMMER WHEN PIECE OF SLAG HIT CHEEK & BOUNCED INTO LEFT EYE

EMPLOYEE WAS CLEANING KILN COOLING TOWER WHEN HOT DUST FLUSHED OUT ONTO EMPLOYEES RT ARM & CHEST CAUSING BURNS

ACCIDENT VICTIM WAS SPLICING 36IN CONVEYOR BELT BELT WAS BEING PREPARED FOR VULCANIZING ELECTRIC WINCH WAS ATTACHED TO BELT TO STRIP RUBBER COVER FROM BELT CHAINS ATTACHED TO BELT BLOCK SLIPPE D UP ROLLER SUPPORT SLIDING ROLLER OUT OF SUPPORRELEASING BLOCK 4INX4IN WOOD & PINNING VICTIMS LEG BETWEEN BLOCK & SUPPORT

EMPLOYEE WAS WALKING FROM COOLER FLOOR TOT HE STOREROOM FOR SOME RESPIRATORS WHEN HE WALKED THROUGH SOME WATER ON THE FLOOR,SLIPPED AND FELL ON HIS RIGHT SHOULDER.

EMPLOYEE WAA REMOVING METAL SHIMS FROM CONVEYOR BELT. EMPLOYEE ALLEGES THAT HE WAS NOT STRUCK BY ANY OBJECT. AFTER LUNCH HIS HAND BEGAN TO SWELL.

EMPLOYEE ALLEGES HE WAS ASSEMBLING EQUIPMENT TO CLEAN UP MATERIAL SPILL AND HE SLIPPED ON CLINKER MATERIAL CAUSING FALL.

EE ALLEGES HE WAS PUNCHING A LUMP OF COAL IN THE BOTTOM OF 4 COAL TANK USING A SHORT BAR AND THE LUMP BROKE AND EE SMASHED FINGER ON EDGE OF THE CONE.

EE ALLEGES HE WAS INSTALLING TAPERED WEDGES IN DOOR ON 3 KILN PRECIPITATORS WITH HAND HAMMER AND WHEN HAMMERING WEDGES HE HIT LEFT THUMB WITH HAMMER.

EE ALLEGES HE WAS CLIMBING FROM THE OUTLET SIDE OF THE BYPASS D.D. AND PULLED TENDON.

EMPLOYEE STATES WHILE WORKING ON PLATFORM, GLOVE BECAME HUNG AND PULLED HIM OFF.

EMPLOYEE WAS REMOVING THE LAST CUTTER POD FROM OUTER CUTTER WHEN THE LAST POD CAME OUT OF THE CUTTER ARM SLIDE OF THE SHAFT