Buscar en el registro

13012OUT 1100 AM EE WAS DRIVING A TRUCK BY THE D-10 WHEN HE SAW SMOKE COMING OUT OF THE ON THE D-10 THAT HAD BEEN PARKED FOR LUNCH. HE STOPPED AND WAS TRYING TO PUT OUT THE FIRE WHEN I OTHER C 14502Y AND GOT MORE HELP.

USING SHOVEL TO CLEAN MATERIAL AROUND TAIL PULLEY OF CONVEYOR.SHOVELED TO GET BITE OF MATERIAL.LEFT HAND HIT METAL GUARD CAUSING LACERATION TO LEFT HAND.STITCHES WERE NEEDED.

I NAME WAS LOWERING VIBRATOR ASSEMBLY INTO SHAKER FRAME HE WAS ATTEMPTING TO LINE UP BOLT HOLES WITH PRYBAR ON ONE SIDE HE PUIT HIS HAND UNDER THE OTHER SIDE TO CHECK BOLT HOLES THE ASSEMBLY M OVED & CUT OFF TIP OF MIDDLE FINGER

STRAINED BACK MUSCLE WHILE LIFTING HEAVY OBJECT MODIFIED WORK WITH LIMITATIONS 04-11-91 TO?

CHANGING WIPER ON CONVEYOR BELT EMPL BENT OVER & GRABBED METAL COUNTY WEIGHT WHICH WAS WORN SHARP & HE CUT LEFT INDEX FINGER.

STRAINED BACK WHILE CLEANING OUT ROCKS FROM BASE PLANT.

EMPLOYEE JUMPED DOWN FROM MAIN SHAKER, LOST HIS BALANCE AND TWISTED ANKLE.

SLIPPED WHILE LUBING 988 LOADER.

USING BIG WATER HOSE TO WASH OUT MUD IN PIT TRUCK, I.NAME CAUGHT HIS LEFT HAND RING FINGER ON HOSE CLAMP THAT WAS ON HOSE. CAUSED A CUT TO HIS FINGER.

I NAME WAS CUTTING METAL WITH A CUTTING TORCH, HE TOUCHED HOT PART OF TORCH WITH HIS LEFT THUMB CAUSING A SECOND DEGREE BURN. HE WAS NOT WEARING GLOVES.

EE WAS OPERATING 637 SCRAPER AND WAS BEING PUSHED BY D10 DOZER, THE D10 DOZER HIT THE 637 SCRAPER TO HARD CAUSING HIM TO EXPERIENCE WHIPLASH.

I,NAME DID NOT HAVE PROPER SAFETY GLASSES ON WHILE TRYING TO UNPLUG CEMENT CHUTE. CEMENT WAS BLOWN INTO HIS EYES AND FACE.

OPERATING 980 CAT LOADER TO FAST AND TO HARD CAUSING OPERATOR TO HAVE NECK STRAIN OVER PERIOD OF TIME

I NAME WAS REPAIRING A PULLEY HE STEPPED OVER THE MOTOR & LOST HIS FOOTING HE CAME DOWN ON HIS RT FOOT THE WRONG WAY & SPRAINED HIS ANKLE

BACK CAUSED BY RUNNING EQUIP UNDER NORMAL CONDITIONS,I.NAME HAD ON-GOING,LONG TERM BACK PROBLESM-20 YRS.UNABLE TO FULFILL PHYSICAL JOB REQUIREMENTS.

OPER DIS NOT ADJUST LOADER SEAT PROPERLY WHE N SLIFT STARTED OPER RAN LOADER ALL DAY IN CONDITION. OPER DID NOT SHOW FOR WORK ON SAT. 3-18-89 REASON WAS BACK SPRAIN ON 3-16-89.

EMPL WAS ATTEMPTING TO CLEAN MATERIAL SHUTE WITH METAL BAR & STRAINED BACK IN PROCESS.

EMPLOYEE WAS WALKING UNDER LOW CONVEYOR HE STOOD UP TO SOON AND HIT HEAD ON CONVEYOR FRAME HE WAS WEARING HIS HARD HAT.

EMPLOYEE STEPPE8 OFF OF SCRAPER AND SPRAINED RIGHT FOOT.

CLEANING OUT RO7KS FROM FEEDER.

STRAINED MUSCLE3IN NECK FROM RUNNING SCRAPER.

EMPLOYEE TRIED 7O LIFT 75LB& SCREEN OVER HIS HEAD TO CARRY UP STRAIRS TO SHAKER

EMPLOYEE DROPPE8 SCRAPER CUTTING EDGE ON HIS FOOT ACCIDENT WAS NOT REPOR TED TILL NEXT DAY (091286)

I.NAME TRIPPED 2VER CRUSHER PART STARTED TO FALL OVER AND TWISTED LEFT KNEE AS HE WENT DOWN.FOOT GOT CAUGHT AS HE FELL WHICH CAUSED INJURY.

SERVICING FILTE9S ON FRONT OF SCRAPER.WHEN HE TURNED AND SLIPPED AND STARTED FALLING.GRABBED HANDRAIL AS HE SLIPPED TO HOLD ON BUT SEPARATED SHOULDER.

ONE MAN WAS TRY3NG TO CARRY LINE SCREEN UP STAIRS SCREEN SLIPPED AND SLID DOWN STAIRS AND HIT HIM ON BOTH ANKLES

COMPLAINED OF SOME BACK AT END OF SHIFT AFTER OVOPERATING SCRAPER.

HE WAS PRYING ROCK WEDGED IN TAIL PULLY WITH A BAR. THE BAR SLIPPED AND HE CAUGHT HIS FINGER BETWEEN BAR AND I BEAM.

FOOT STARTED SWELLING AFTER WORK, HE DOES NOT KNOW WHEN HE HURT IT. HE WAS DOING PLANT REPAIRS THAT DAY, MUST OF HIT IT AGAINST SOMETHING.

980 LOADER WAS BEING ROAD TESTED, THE LOADER DIED ON MAIN HAUL ROAD OPERATOR COULD NOT CONTROL STEERING WADER WAS HEADED FOR BERN IMBANKMENT 25 FT TO BOTTOM OPERATOR JUMPED OUT LOADER WENT OVE R BERN DOWN INBANKMENT DID NOT THROU OVER FRONT END LOADER.

I NAME WAS RUNNING SCRAPER ON NORMAL SHIFT,MUST HAVE TWISTED BACK AT SOME POINT.

PULLING MATERIAL OFF OF HILL WHEN HE HIT A HARD PIECE OF GROUND WHICH TURNED THE SCRAPER SIDEWAYS THEN FLIPPED IT COMPLETELY OVER.

SLIPPED OFF 988 CAT LOADER LADDER.

DECIDED TO LIFT HEAVY OBJECT BY HIMSELF.