Buscar en el registro

Employee fell from dozer track while adding hydraulic oil. Employee lost footing and fell to the ground, landing on frozen surface. Conditions contributing to the accident included frozen ground and elevated work position on equipment. Injury resulted in a hip fracture requiring medical treatment and lost work time.

Contractor electrician and another EE went to the GFI, talked about what was happening w/dredge etc. They pulled the handle to trip fuses. EE opened the GFI door and talked about how everything worked. EE looked and tested the fuses down low w/EE's meter then went to test things up higher and that's when EE's meter blew up.

Employees were unloading a pallet from a semi using a skidsteer. Employee had injured employee stand on the forks as a counter balance. When the pallet came off the edge of the truck it dropped and flipped up catching injured employee's legs between the back of the pallet and forks cutting injured employee's legs.

EE put new batteries in the dozer. When EE stepped back up on the track to tighten the batteries, EE felt pain in the back. The pain got worse when EE got in the truck. Went to the doctor and they said EE pulled a muscle. Sent EE home - next appointment is on 4/8/2021.

Employee was using a hand held 4 1/2" angle grinder on a piece of metal, he felt something go in his eye even though he was wearing safety glasses. he continued working, it wasn't until that evening that his eye hurt and he realized he still had something in it. He went to the doctor the next morning.

THEY WERE WORKING ON THE DREDGE PUMP. THEY HAD MOVED THE PUMP SHELL TO THE FRONT OF THE HULL TO LEAN AGAINST THE HULL. THE SHELL FELL BACK PINNING EMPLOYEE BETWEEN THE SHELL AND THE IMPELLOR. INJURED AND CO-WORKER PUSHED THE SHELL AWAY SO HE COULD FREE HIMSELF.

CUTTING STAIRWAY LOOSE FROM PLANT. HAD CRANE HOOKED ON, CUT LAST WELD, STAIRS POPPED LOOSE AND HANDRAIL HIT ME IN RIBS.

EE GET OUT OF HIS LOADER TO CLEAN HIS BUCKET OUT MANY TIMES DURING THE DAY DURING ONE OF THESE TIMES SAND WAS BLOWN IN HIS EYE IT WAS A WINDY DAY NOT EXACTLY SURE WHEN THIS HAPPENED DURING THE WORK DAY WENT TO DR THE NEXT AM.

I HOOKED A CABLE ON BACKHOE BUCKET AND STARTED BACK TO LOADER. WOKE UP IN HOSPITAL. ROCK CAUGHT CABLE, WHEN CABLE PULLED LOOSE IT HIT EE IN THE FACE AND THE HEAD. Y

CARRYING ACETYLENE TANK TO SHOP NIGHT BEFORE FELT SOMETHING GIVE IN BACK NEXT DAY. NEXT DAY HE FELT A SHARP PAIN IN HIS BACK.

EE WAS RUNNING THE TRUCK HAULING FILL SAND. IT WAS WINDY AND SOME OF THE MATERIAL BLEW INTO THECAB AND ENTERRED HIS RIGHT EYE. THE WIND BLEW SMALL PIECED OF RUST INTO HIS EYE.

PUTTING 10" WATERPIPE IN AND WEDDING RING GOT CAUGHT ON A STEEL BAR AND FINGER WAS CUT DUE TO RING BEING CAUGHT.

REPLACING A CUTTING EDGE ON END LOADER. WAS REMOVING A BOLT AND CUT HIMSELF ON THE BOLT. CUT INDEX FINGER ON RIGHT HAND. NEEDED 3 STITCHES TO CLOSE CUT.

WAS REPAIRING OUTBOARD MOTOR. WAS GETTING OUT OFBOAT AND GOT FEET TANGLED IN ANCHOR ROPE. FELL AGAINST SIDE OF BOAT. INJURED RIGHT SHOULDER AND RIGHT SIDE OF NECK.

TRIPPED OVER BROKEN CONCRETE, SPRAINED LEFT ANKLE.

REPAIRING ENGINE MOUNT OF STACKER, SUPPORT CHAINSLIPPED DROPPED ENGINE 2" - 3" CUT & BRUISED RIGHT FOREARM.

WAS CUTTING WIPER FOR CONVEYOR BELT, KNIFE SLIPPED & PUNCTURED ARM.

ADJUSTING MOUNTS TO OBTAIN PROPER BELT TRACKING.HE LOST HIS FOOTING & GRABBED THE BELT & ENGAGEMENT LOVES AT THE SAME TIME CAUSING HIS HAND TO GO AROUND, TWO FINGERS WERE CRUSHED IN THE BELT ON HIS LEFT HAND.

I WAS TURNING PIPE OUT ON THE POND. THE BOLTS I WAS LOOSENING HAD RUST ON THEM, THE WIND PICKED UP & BLOW RUST IN MY RIGHT EYE.

HELPING GUIDE THE PUMP IN WHEN PUMP WAS PUSHED. ARM GOT CAUGHT BETWEEN DREDE AND PUMP.

INDIVIDUAL WAS LIFTING PLATE OF STEEL HE DROPPED IF AND IT FELL ON FOOT.