Buscar en el registro

EE standing on the bus, which transports them to their equipment, when the driver went to slow down and hit the brakes injured was thrown into the windshield.

Employee was fueling a 777D, when he went to remove the nozzle the hose stuck open letting fuel out, which hit him in the face. Fuel went in his eyes, mouth and nose.

Employee was filling the antifreeze tank, when he pulled the hose from the tank he got antifreeze in his eyes.

Employee was starting a 992D loader. When he went to dismount the loader, he slipped down the steps. It was snowing and the step were slick.

Employee was operating a 777D rock truck when a loader put a large rock in the bed of his truck. The rock was off center, which caused the hauler to rock sideways. EE hit his left shoulder on the door post.

Employee was mounting a 988G Coal Loader when his hands slipped off the hand rails causing him to fall off the loader. He did not receive medical care or miss any time until November 6, 2005.

Employee was dismounting a 777D when his foot slipped off the step. Employee caught himself, hurting his back and stomach.

Employee was changing a tire on a truck. He lifted the flat, muddy tire to place it in the back of the truck, when he felt strained in the back and groin area. The condition worsened as the day when on.

Employee was leaving the filter trailer. When she stepped onto the deck, a board broke causing her right leg to go through the deck.

EE was operating a 785 when the loader loading his truck hit his hauler with its bucket, jarring him.

EMPLOYEE WAS DISMOUNTING A LOADER. AS HE STEPPED TO THE GROUND HE TWISTED OR PULLED A MUSCLE IN HIS BACK.

Employee was picking up and carrying metal brackets to install boggie pins in a D11 dozer's roller frame, when he pulled a muscle in his chest.

HE WAS REBUILDING D9N DOZER INSIDE SHOP WHEN HE GOT SOMETHING IN HIS EYE; DIDN'T KNOW WHERE HE GOT IT FROM

HE WAS BUILDING A SAFETY STAND WHILE PUTTING IT TOGETHER HE STEPED ON A PIECE OF WOOD WITH A NAIL IN IT, RUNNING IT THREW HIS RIGHT FOOT.

HE WAS FILLING TANK WITH WATER. WENT TO GET DOWN OFF OF THE TRUCK AND THE PIECE OF METAL HE WAS HOLDING ONTO GAVE LOOSE, CAUSING HIM TO SLIP, CAUSING HIM TO HIT THE BACK OF THE TRUCK WITH HIS LEFT HIP AND CUTTING THE PALM OF HIS LEFT HAND.

HE WAS USING A GRINDER WHILE WORKING ON A 992 BUCKET. SOMETHING GOT PAST HIS WELDING HELMET AND IN HIS LEFT EYE.

AFTER SERVICING D11N AS HE WAS GETTING OFF OF DOZER HE SLIPPED AND LEG WENT BETWEEN TRACK AND PUSH ARM.

DOZER BACKING UP IN RUN RIGHT TRACK WENT UP ON A ROCK DOZER TURNED OVER ON LEFT SIDE. SEAT BELT CAUGHT OPERATOR AROUND MIDDLE. TOOK HIM TO EMERGENCY ROOM TO BE CHECKED. THEY RELEASED HIM FROM EMERGENCY ROOM AROUND 4:00 AM ON 3/12/2003. EMERGENCY ROOM DR GAVE HIM A SLIP TO RETURN TO WORK ON 3/13/2003.

FALL WHILE DISMOUNTING HAULER. ALL HANDRAILS & STEPS WERE IN GOOD SHAPE.

HE WAS REBUILDING ROLLER FRAMES FOR D11 TRACTOR. TAKING SNAP RINGS OUT OF BOGGIE PIN COVERS WHEN HE GOT A SMALL PIECE OF METAL IN HIS LEFT EYE.

HE WAS REPAIRING THE FRAME OPN A D11N TRACTOR. HE WAS PUTTING A PIECE OF METAL 35 X 26 X 3/4 IN PLACE AND HIT HIS KNEE AGAINST IT.

EE WAS ON HIS WAY TO WORK WHEN HIS PERSONAL VEHICLE QUIT ON THE ENTRANCE ROAD. HE PULLED TO THE SIDE OF THE ROAD. AFTER PARKING, EE REMOVED THE RADIATOR CAP AND HOT ANTIFREEZE BURNT HIS LEFT A RM.

WALKED OUT OF SHOP GOING TO HIS SERVICE TRUCK THE WINDOR SOMETHING GOT SOMETHING IN HIS LEFT EYE

HE WAS PUTTING ROLLERS INTO EXCAVATOR BUCKET, SO HE COULD MOVE THEM CLOSER TO WHERE HE WAS WORKING. INJURY OCCURED WHEN HE WAS ROLLING A ROLLER INTO THE BUCKET.

EE WAS INSTALLING RACES INTO 785 WHEEL HUB WITH PRESS. RACE WAS GOING IN CROOKED. TOOK 2 HAMMERSAND WAS USING THEM TO STRAIGHTEN THE RACE WHEN APIECE OF A HAMMER CAME OFF AND HIT HIM. METAL IM BEDDED INTO LEFT SIDE OF HEAD NEAR TEMPLE.

THE EE HAD RETURNED TO CHECK SHOT AFTER BLAST. WHEN WALKING ACROSS SHOT HE STEPPED ON A ROCK THAT GAVE AWAY CAUSING HIM TO FALL.

LOADING A BARREL OF ANTIFREEZE INTO BUCKET OF BACKHOE. GOT FINGER BETWEEN BARREL & BUCKET CUTTING & MASHING FINGER

EE WAS HELPING A MECHANIC LOAD DRILL PARTS ON A TRUCK. THE PART SLIPPED AND CAUGHT FINGER BETWEEN PART AND TAIL GATE MASHING FINGER.

EE WAS OPERATING A DRILTECH DRILL WHEN THE SPOIL ON THE EDGE OF THE BENCH FAIL ON TO THE RIGHT SIDE OF THE DRILL. THE OPERATOR EXITED THE DRILL TO THE LEFT SIDE, JUMPING TO THE GROUND TO PREVE NT BEING TRAPPED BY THE SPOIL.

EE WAS DOING ROUTINE SERVICE TO 777B CAT HAULER. HE WAS STANDING ON LADDER TO REACH AIR FILTERS/ LADDER SLIPPED FROM UNDER HIM ALLOWING HIM TO FALL. HE STRUCK HIS BACK ON STEERING ARM OF HAULE R DURING FALL.

DUST IN EYE FROM AIR WRENCH, WHEN REMOVING BOLTS FROM DOZER.

OPERATOR WAS CLEANING WALL WITH EXCAVATOR WHEN ROCKS CAME OVER BUCKET THROUGH WINDSHIELD AND HIT HIM ON LOWER PART OF HIS LEGS.

ROCK FELL OFF HIGH WALL AND HIM IN THE RIGHT LEG.

REPLACING BIT ON DRILL #04 HIT HAND WITH HAMMER.

EE WAS CARRYING FUEL TO A PUMP AND HE SLIPPED AND FELL. HE FRACTURED HIS TAILBONE.

WAS CLEANING WINDOWS ON MACHINE AT START OF SHIFT AND GOT DIRT IN HIS EYES.

REPLACING HARD BARPIN IN DOZER D10N. WHILE USING BIG HAMMER HURT HIS BACK. DID NOT GO TO DR.

EMPLOYEE WAS MOVING 1100-22 TIRES FROM A STORAGE TRAILER ONTO A FLAT BED TRUCK AND UNLOADING THEM FROM THE FLAT BED TRUCK TO A STORAGE SHED WHEN HE INJURED HIS BACK. THE ACCIDENT WAS NOT REPOR TED UNTIL 1-26-98. FIRST MEDICAL ATTENTION WAS RECEIVED 2-10-98.

HE WAS LIFTING A MOUNTED 1100X22 TIRE TO STAND UP AND ROLL IT OFF OF WHITE 700 FORD FLATBED. HAD SHARP PAIN IN LOWER BACK.

THEY WAS HOOKING UP THE HOIST JACK BACK TO THE BLADE. WHEN EE'S LEFT HAND GOT BETWEEN HOIST CYLINDER AND CONNECTOR BLOCK. IT BROKE HIS RING FINGER.

EE WAS CLEANING UP THE SHOP, HE WAS PICKING UP METAL AND SHIMS. A SHARP SHIM CUT HIS LITTLE FINGER ON HIS RIGHT HAND

THE EMPLOYEE OPENED THE VALVE TO DRAIN THE WATER OUT OF THE AIR TANK ON THE LUBE TRUCK, NOTHING CAME OUT OF THE HOSE. HE ASSUMED NO AIR BUILT UP IN THE TANK. HE TOOK ONE STEP TOWARD THE CAB TO START THE TRUCK AND BUILD UP AIR. AT THAT TIME THE DRAIN HOSE BROKE LOOSE AND STARTED WHIPPING.THE FORCE HIT HIM IN HIS RIGHT EYE, CHEEK AND FOREHEAD.(THING IN HOSE END MUST HAVE BLOCKED AIR)

PULLING ON 6" WATAER LINE [DISCHARGE] MOVING WATER LINE BACK UP HILL OUT OF THE WAY SO THAT DRILL COULD DRILL ON SHOT SLIPPED ON A ROCK & FELL ON MY ATM.

EMPLOYEE HAS BEEN DIAGNOSED WITH PNEUMOCONIOSIS HOWEVER, WHILE EMPLOYED WITH CO., HE OPERATED A DRILL WITH A PRESSURIZED CAB REDUCING THE POSSIBILITY OF HIS CONTRACTING THIS DISEASE WHILE EMPL OYED BY US.

INJURED WAS INSTALLING TRACK PIN ON TRACK ON EXCAVATOR BY USING A HAMMER HE HAD HIT PIN SEVERAL TIMES WITH HAMMER WHEN A PIECE OF METAL CAME OFF OF PIN AND STRUCK HIM IN THE LEFT SIDE ABOVE WAIST LINE PENETRATING THE SKIN.

AT 12:00 EMP WAS GETTING OFF OF HIS LOADER. WHENHE STEPPED DOWN FROM THE TIRE TO THE COUNTER WEIGHT HIS FOOT SLIPPED AND HE FELL DOWN THE SIDE OF THE STEP. A KNOT APPEARED ON HIS RIGHT SHIN AN D HE SCRAPED THE SIDE OF HIS LEG.

WHILE STRAIGHTING A STEP ON A 988B WITH A SLEDGE HAMMER, A PIECE OF THE SLEDGE HAMMER [METAL] CAME OFF & STRUCK HIM IN THE LEFT JAW.

HE SAID HE WAS LIFTING A TREE OFF THE HOOD OF HIS DOZER.

HE WAS STANDING ON THE TRACK WHILE CHECKING HIS OIL AND HE SLIPPED AND TWISTED HIS KNEE.

CAUGHT THUMB BETWEEN SKID AND MAIN FRAME OF AUGER WHILE PUTTING SKID INTO PLACE UNDER AUGER.