Buscar en el registro

THE DRIVER WAS IN 3RD. GEAR AND TRIED TO DOWN SHIFT INTO 2ND GEAR, BUT COULD NOT GET IT INTO 2ND GEAR. HE JUMPED OUT OF THE TRUCK, BREAKING HIS SHOULDER AND CUTTING HIS CHIN. THE TRUCK WAS A T OTAL LOST AFTER HITTING A DRAIN CATCH BASIN. IT IS AGAINST COMPANY POLICY TO CHANGE GEARS ON A GRADE.

TWISTED ANKLE & FELL FROM THE TRACK OF D8K DOZER.

I.NAME USING A BAR TO HELP LINE UP METAL HOSE TO A VALUE CHEST WHILE PULLING ON BAR FOOT SLIPPED CAUSING EMPL TO FALL DOWNWARD. BAR CAME LOOSE STRIKING I.NAME ON SIDE OF HEAD.

USING HAND TO HOLD BOLT HEAD WHILE TRYING TO REMOVE NUT WITH IMPACT WRENCH

WHILE MOVING ROCK WITH LOADER THE BUCKET SLIPPED OFF ROCK HE WAS TRYING TO MOVE THROWING OPERATOR UP INTO HEATER KNOB ON LEAD CAUSING TWO CUTS TO HIS HEAD.

WAS HELPING INSTALL TRANSMISSION IN A TIRE TRUCK. WHILE SLIDING COMPANIES UNDER THE TRUCK IT GOT CAUGHT ON THE FUEL TANK EE MOVED THE COMPANENT UNITL IT WAS FREE. WHEN IT CAME FREE IT TILTED C ATCHING THE EE S FINGER BETWEEN THE COMPONENT AND THE FRAME OF THE TRUCK.

WAS WORKING CLOSE TO ANOTHER WELDER AND RECEIVED FLASH BURNS TO EYE.

THE 3-4" REDUCER BLEW APART WHILE PUMPING.PUMPMAN WAS HIT IN THE FACE VERY HARD.WAS WEARING SAFETY GLASSES AT THE TIME.THE GLASSES WERE BLOWN OFF AND MATERIAL GOT IN EYES.FLUSHED EYES IMMEDIAT ELY WITH CLEAN WATER.ASKED IF ALL RIGHT -STATED THOUGHT THERE WAS STILL SOMETHING IN EYES.CALLEDSECURITY,ASKED THEM TO DISPATCH AN EMT. ARRIVED & LOOKED AT EYES,SUGGESTED EMPL BE TAKEN TO MHU

USING JACK HAMMER STEEL BROKE AND HAND SLIPPED CAUGHT FINGER ON HANDLE

WHILE TRYING TO PUT CONDUIT THROUGH COAL PLUG IN GLORY HOLE,CONDUIT BROKE FREE AND BALL VALVE HIT EMPLOYEES HAND CAUSING A LACERATION.

MASHED FINGER ON BED OF TRUCK

HE WAS COMING OFF A HILL IN TOO HIGH A GEAR AND TRIED TO DOWN SHIFT AND KILLED HIS ENGINE WITH ATHE J-BRAKE. HE LOST CONTROL OF THE TRUCK AND TURNED OVER.

LEANING AGAINST RAILING GAVE WAY HE FELL INJ TO ARM AND CUT ON HEAD SUTURES

SLIPPED ON BUMPER STEP GETTING OFF TRUCK FENDER

PULLED A MUSCLE IN HIS BACK WHILE LIFTING ON THE DUMP LEVER AT THE PRELL BINS.

EE WAS STRUCK BY ROCK FROM A SURFACE BLAST.

DIESEL FUEL SPRAYED IN EYES WHILE TRYING TO FUEL MANBUS.

IN AN ATTEMPT TO RUN FROM A SNAKE, HIT LEG WITH CHAIN SAW CAUSING A CUT TO THE LEFT KNEE.

ATTEMPTING TO PULL THE ROD FROM A TILT JACK USING BOOM AND NYLON CHOKER A SHARP EDGE ON THE ROD CUT THE CHOKER THE JACK FELL ON MECHANICS HAND

LOOSE ROCK FELL FROM HIGHWALL.EMPL FELL AND HIT KNEE ON ROCK TRYING TO GET IN THE CLEAR.

EMPLOYEE SLIPPED AND FELL WHILE DISMOUNTING MACHINE AT SHIFT CHANGE.

TWISTED ANKLE AND FELL FROM TRACKS OF DOZER

EMPLOYEE BACKED DOZER OVER A ROCK & WHEN IT SAT DOWN HE FELT A PAIN IN HIS LOWER BACK

BENT DOWN TO PICK UP TRANSMISSION AND STRAINED MUSCLE IN HIS LOWER BACK.NOT REPORTED UNTIL 1-19-90.

FOREMAN STOPPED TO LET DOZER OPERATOR OUT AT HIS DOZER.HE THEN PULLED UP AND LET THE LOADER.OPERATOR OUT AT THE LOADER.HE THEN BEGAN TO BACK UP USING ONLY THE SIDE LIRROR ON HIS PICK-UP TRUCK. HE BACKED INTO THE DOZER OPERATOR KNOCKING HIM TO THE GROUND.

HE WAS CUTTING BRUSH IN A BRUSH PILE GETTING IT READY TO BURN WHEN HE STARTED TO TURN AROUND HE CAUGHT HIS FOOT AND PULLED BACK.

WHILE INSPECTING A BROKEN TILT JACK EMPLOYEE RAKED HIS HAND ACROSS A SHARP EDGE CAUSING A CUT ON THE RT HAND

CUTTING TIMBER CUT INTO BUSH WITH CHAINSAW ,IT KICKED BACK AND CUT LEFT LEG.

EMPLOYEE PULLED A MUSCLE IN HIS BACK WHILE TRYING TO LIFT TWO TUBES OF WET HOLE EXPLOSIVES.

EMPLOYEE LOST FOOTING ON A CORE ROCK AND TWISTED HIS KNEE. *NOTE* ACCIDENT OCCURRED ON 8/22/89 BUT WAS NOT REPORTED TILL 9/1/89.

EMPLOYEE HAD CUT A PIECE OF METAL OUT OF A LOADER BUCKET AND WAS TRYING TO PRY IT LOOSE WITH A SCREWDRIVER. THE METAL BROKE FREE AND HIT THE EMPLOYEE IN THE MOUTH.

SLIPPED ON STEP WHILE GETTING INTO TRUCK & HIT LEFT SHIN CAUSING A POUNCTURE WOUND ON SHIN IT WAS DAYLIGHT & WEATHER WAS DRY

EMPL WAS SITTING IN BACK SEAT OF MANBUS WHERE THERE WAS VERY LITTLE HEAD ROOM. BUS HIT ROUGH PLACE IN ROAD & BOUNCED AGAINST CEILING OF BUS.

TIGHTENING LUGS ON WHEELS USING RACHET STOOD ON RACHET FOR MORE TORQUE RACHET SLIPPED CAUSING FALL.

EMPL PULLING CABLE OVER BOOM WHEN CABLE GOT STUCK CAUSING EMPL TO FALL THROUGH BOOM INJURING CHEST AND RIGHT KNEE.

EMPLOYEE WAS A GREASE BARREL WITH DIESAL FUEL TO KEEP WARM WHILE WORKING ON EQUIPMENT HE MADE AN ATTEMPT TO SMOTHER THE FIRE AND THE FIRE BLEW IN HIS FACE CAUSING BURNS.

USING COMPUTER CARD AT SCALE HOUSE CARD FELL OUT OF HANDS BENT OVER TO PICKUP CUOLDNT GET BACK UP.

WHILE CHANGING DRILL STEEL THE WIND BLEW A SMALL PIECE OF METAL IN THE EYE. EMPLOYEE WAS WEARING SAFETY GLASSES AT THE TIME.

CLEANING COAL OUT OF BOTTOM OF TAILGATE, BECUASE THE TAILGATE WOULD NOT CLOSE DUE TO COAL LEFT IN BED.

CHANGING TUE ON LOWBUY CAUGHT FINGER BETWEEN WHEEL AND BRAKE DRUM.

WAS WALKING T O DRILL WHEN HE FELL IN A HOLE & HIT HIS HEAD CAUSING A CUT ON H IS EAR & CHIN

WAS CUTTING TIMBER AND BUSH FELL AND HIT SHOULDER.

DOZER OPERATOR HIT A LIVE CAP WITH DOZER BLADE SETTING THE CAP OFF

EMPL WAS CLIMBING THE RTIRE OF A ROCK TRUCK TO REPLACE A BROKEN GREASE LINE ON THE LIFT JACK HIS FEET SLIPPED AND ALL HIS WEIGHT LANDE D ON HIS L FOOT CAUSING SEVERE BACK PAIN

EMPLOYEE TWISTED BACK WHILE ENTERING THE REAR ENGINGE COMPARTMENT OF THE HYDRAULIC SHOVEL.

EMPL WAS MANUALLY ROTATING BELT ON BELT DRIVE IN ATTEMPT TO ALIGN KEY. HE TURNED HEAD TO TALK WITH ANOTHER EMPL & ALLOWED FINGER TO GLIDE BETWEEN BELT & BELT ROLLER.

OPERATOR DOING PRE-SHIFT INSPECTION ON UNIT #104 RAISED HOOD TO CHECK OIL THOUGHT HOOD WAS LOCKED IN PLACE HOOD CAME DOWN ON SHOULDER THROWING OPERATOR OFF VEHICLE ONTO GROUND.

DOZER WENT SIDEWAYS ON A LARGE FLAT ROCK OPERATOR JERKED THE CUTTING CLUTHC & PULLED A MUSCLE IN HIS BACK

WAS COMING INTO PIT #1 EMPTY GOING INTO #11 CURVE. AS STARTEED TO TURN WHEELS UNIT STARTED TO SLIDE ROAD WAS EXTREMELY WET, TOUCHED BRAKES TO BREAK SLIDE BUT DIDN'T HELP BY THIS TIME UNIT WA S COMING INTO BERM, THERE WAS A ELEVATED ROCK, FRONT TIRE THREE UNIT INTO BERM & DRIVER FROM DRIVERS SIDE TO PASSENGER SIDE. AT THIS POINT TRUCK WAS BARELY ROLLING UNIT CONTINUED OVER HILL DR

USING A PORTABLE PRESS RAM TO REMOVE CONECTING PIN FROM BUCKET TILT LINK. THE PULLER BOLT BROKE AND FORCING PLATE BOUNCE AND HIT THE EMPLOYEE IN THE LEG.