Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
ELMPLOYEE WAS ON THE HI-LIFT LADDER, TALKING TO THE OPERATOR. HE SLIPPED ON LADDER AND TWISTED HIS LEFT ANKLE AND STRAINE DHIS BACK. HE DIDN'T FALL OFF LADDER.
EMPLOYEE WAS HELPING SCOOP OPERATOR CHANGE BATTERY'S ON 482 S&S SCOOP AND WAS STANDING AT REAR OF SCOOP HOLDING THE BATTERY JUMPER CABLE ANDHE SCOOP BUMPED HIM KNOCKED HIM DOWN BRUISING RIGHT RIGHT LEG AND HIP.
WHILE MINING IN #3 ENTIRE OF #2 MAIN OF THE #5 MINE, THE CONTINUOUS MINER CUT INTO AN ABANDONED MINE AT 2PM ON 11-9-93. THE MINE WAS SHOWN ON THE MINING MAP AND WAS SHOWN TO BE 1000 FT FROM OLD ABANDONED MINE. THE MINE HAD THE MAPS SHOW ING MINING IT WAS CA-147 ID# FOR THE STATE RECORDS POWER WAS SHUT OFF THE FACE AREA AND MEN WITHDRAWN TO SAFE LOCATION.
THE EMPLOYEE WAS BENDING A 4' ROOF BOLT BETWEEN THE TOP OF THE BOLTER ON THE TOP OF THE WHEEL ON BOLTER. THE TIRE WAS WET & THE BOLT SLIPPED OFF TO THE SIDE CAUSING THE MAN TO FALL ALL HIS WEI GHT ON HIS RIGHT ARM WITH HIS WEIGHT COMING DOWN ON HIS ARM ON THE BOTTOM IT BROKE HIS ARM ABOUT 4" TO 5" ABOUT HIS WRIST BOTH BONES.
EMPLOYEE WAS PUTTING ROCK DUST ON STEEP HILL ON TRAVEL WAY WHEN A PIECE OF ROCK MEASURED 16IN LONG BY 9IN WIDE & 3/4 TO 1IN THICK FELL & HIT HIM ON HAT KNOCKED OF HAT & HIM TO FLOOR
WHILE LIFTING A WHEEL UNIT IN SCOOP BUCKET, EMPLOYEE PULLED SOMETHING HIS BACK.
WHILE WAITING FOR EQUIPMENT TO MOVE ACROSSED INTERSECTION ON #4 MAIN ENTRIE. HE WAS STANDING NEXT TO RIB ON CABLE SIDE WHERE IT WAS BACK LASHED. THE OPERATOR OF SC STARTED TO SC AND THE CABL E WAS AROUND EMPLOYEE FOOT AND TWISTED HIS KNEE.
WHILE ATTEMPTING TO INSTALL A NEW V BELT ON THE STACKER BELT, THE EMPLOYEE WAS PULLING ON A PRY BAR TOWARD HIMSELF, & THE PRY BAR SLIPPED, STRIKING HIM ON THE NOSE.
EE FOUND THE FALL AT 2 PM AND HAD STARTED HIS RUN AT NOON 12PM THE FALL WAS #12 XCUT ON #2 MAIN IN #2 ENTRIES. IT MEASURED 20 X 22' APPROX. IT FELL ABOUT 4' TO 7'. AREA WAS BOLTED WITH 4' BOLT S FULLY GROUTED RESIN.
EE FOUND THE FALL ON FIRE BOSS RUN AT 5:50 AM ON PRE-SHIFT EXAMINATION NO ONE WAS IN THE MINE. THE FALL MEASURED 35 FT LONG AND 25' WIDE IN INTERSECTION TO 18' IN X-CUT. IT FELL APPROX. 4' ON LIPS TO 6' IN THE MIDDLE.
EE FOUND THE FALL ABOUT 12 NOON ON SAT NOV.7 THE FIRST FALL FELL A CROSSED #4 ENTRIES THRU. XCUT #16 3-4 ACROSSED #3-ONE 1/2 OF INTERSECTION. UP #3 TO XCUT #17 XCUT THRU XCUT #17 TO #2. UP #2 ENTRIES TO XCUT #18 THRU #18 TO #1 ENTRIES ACROSSED ENTRIES INTO RIB. THE ROOF SHOWDED NO SLIPS VISABLE, BUT ABOVE BOLT ANCHORAGE SLICK & SLIDE ROOF WAS VISABLE.
EMPLOYEE WAS WALKIGN TOWARD THE LAST OPEN CROSS IN THE #3 ENTRY, WHEN A PIECE OF ROCK MEASURING 3'X3'X2" FELL BETWEEN THE ROOF MATS AND RIB, STRICKING HIM ON THE BACK.
THE INTERSECTION 240' OFF #6 ENTRY OFF #1 MAIN IN BELT ENTRY OF #2 MAIN FELL SOMETIME BETWEEN 6AM AND 3PM ON SUNDAY 09-28-92 WAS FOUND BY (NAME) MAKING FIRE BOSS RUN. IT WAS BOLTED ON 4' CENTE R 4' FULL GROUTED BOLTS. SLIP WAS IN IMMEDIATE ROOF AND WAS NOT VISABLE TO SEE THE FALL MEASURED 25' WIDE BY 24' LONG MAXIMUM HEIGHT 5'.
54736YEE WAS HELPING TO LIFT A SHUTTLE CAR WHEEL UNIT ONTO SOME CRIB BLOCKS & STRAINED HIS UPPER LEFT BACK AREA
EMLOYEE WAS LEANING OVER ROOF BOLTER AFTER POSITIONING THE ROOF BOLTER IN INSTERSECTION TO LOAD SUPPLY ON THE BOLTER AND THE RUBER TIRED MANRIP BACKED UP PINNING THE EMPLOYEE'S RIGHT ANKLE BET WEEN THE BOLTER & THE MANTRIP. X-RAYS SHOWED A HAIR LINE BREAK ON END OF ANKLE BONE.
EMPLOYEE STRAINED HIS LOWER BACK WHILE LIFTING & PULLING THE MINER CABLE ON 12-6-91. HE WAS OFF ONE DAY & RETURNED TO WORK ON 12-9-91. HE WAS OFF WORK AGAIN ON 1-13-92. THIS IS A REOCCURRANCE OF THE SAME INJURY WHICH HAS ALREADY BEEN REPORTED.
EMPLOYEE INJURED LOWER BACK ON 05-30-91 WHILE LIFTING POSTS.HE WAS OFF FIVE DAYS AND THEN CAME BACK TO WORK ON 06-10-91.EMPLOYEE WORKED UNITL 07-01-91 AND WAS OFF AGAIN FOR 45 DAYS GETTING BAC K THERAPY.AT THAT TIME HE WAS INFORMED HE WOULD NEED A DISC SCRAPPED TO RELIEVE PRESSURE FROM NERVES.BOTH TIMES EMPLOYEE WAS OFF 7000-1 FORMS WERE SENT TO MSHA.THIS IS BEING SUBMITTED AS A ME
EE WAS LIFTING AND PULLING MINER CABLE AND STRAINED LOWER BACK.
FALL STARTED 20 IN X CUT 34 ENTIRES 4 INBY 2 SUB MAIN IN INTERSECTION OF 3 ENTRIES AND WENT 10 FT INTO X CUT 3-2 MEASURING APPROX. 47 WIDE X 20 FT WIDE THERE WERE 6 FT BOLTS IN X CUT 3-4 ENTRI ES ROCK BROKE AROUND BOLTS AND ROCK FELL IN INTERSECTION WHICH WAS BNOLTED WITH 4 INCH BOLTS ROCK ADVERAGE 4 FT THICK FELL TO SANDSTONE.
THE ROOF FELL IN INTERSECTION ON #5 ENTRY IN 3 LEFT BUTT 600' OFF #2 MAIN. IT FELL 4' HIGH AND WAS 25' X 25'. IT WAS A CHANGE IN ROOF WHERE SANDROCK WAS ROLLIN AND SLATE WAS FROM 1' TO 4' THIC K IN AREA.
THE FALL WAS DISCOVERED ON A ROUTINE INSPECTION. THE AREA WAS SECURE ON 8-1-91 WHEN WEEKLY EXAMINATION WAS MADE. THE FALL WAS ON #2 MAIN #2 ENTRY 1100 OFF #1 MAIN. IT MEASURED 20' X 22' X 4' H IGH. IN A FOUR WAY INTERSECTION. FALL DID NOT DISRUPT VENTILATION OR TRAVEL.
EMPLOYEE STRAINED LOWER BACK ON 05-30-91 UNLOADING POST OUT OF SCOOP BUCKET & WAS OFF 5 WORK DAYS & RETURNED TO WORK 06-10-91 & WORKED TILL 07-01-91 & BACK WAS STILL GIVING HIM PROBLEMS HE IS OFF NOW TO GIVE IT REST & TO SEE IF THAT WILL HELP HIM
HELPING UNLOAD POSTS FROM SCOOP AND STRAINED BACK
MINER MINED 15' THROUGH X-CUT FROM #4-3 ENTRY IN 4RT BUTT.THE 2ND BREAK THROUGH OFF #6 ENTRY OF #2 SUBMAINS.HAD DROPPED #1,2,3 ENTRIES BECAUSED OF BAD ROOF.CUTTING X-CUT THROUGH FOR AIR CONNEC TION.THE FOREMAN MOVED SPARE BOLTER INTO #3 ENTRY TO GET OUT OF WAY ...MINER MOVED TO #6 ENTRY,WHILE THEY MOVED 15'CUT IN INTERSECTION FELL .NO ONE WAS AT AREA WHEN IT FELL OR DONE ANY ...CON
WHILE DRILLING A HOLE IN ROOF, THE EMPLOYEE WAS CHANGING FROM THE STARTER STEEL TO THE DRIVER AND FINISHING STEEL, WHEN A PIECE OF ROCK MEASURING 1/2" THICK TO SHARP EDGE AND 8" WIDE FELL BETW EEN ATRS RING AND STEEL ON EDGE AND CUT EMPLOYEE'S LEFT THUMB CUTTING ALONG THUMB AND NAIL.
WHILE PULLING A 10-5 TYPE PUMP CABLE EE SLIPPED ON WET BOT
WHILE CARRYING A 2" FLIGHT PUMP, EMPLOYEE SLIPPED ON BOTTOM AND FELL ON HIS RIGHT WRIST AND ARM.
EMPLOYEE WAS OBSERVING THE BOLTERS BOLTING & WAS STANDING AT LEFT REAR OF BOLTER WITH HS HAND ON TOP; OF CANOPY ABOVE OPERATORS COMPARTMENT WHEN A PIECE OF ROCK FELL BETWEEN STUDS & BOLTS & IN JURED HIS RT HAND THE ROCK MEASURED 4IN THICK BY18IN LONG & 14IN WIDE
WHILE PULLING A PUMP CABLE 10-5 TYPE.EMPLOYEE SLIPPED ON WET BOTTOM AND STRAINED LOWER BACK..
EMPLOYEE AND ELECTRICIAN WERE PUTTING IN THE CABLE PLUGS FOR THE SECTION LOAD CENTER.EMPLOYEE PLUGGED IN THE PUMP CABLE AND PUT THE BREAKER ON AND THE CABLE WAS DAMAGED ONE FOOT FROM THE PLUG CAUSING THE CABLE TO SHORT AND FLASHED OUT AND IRRITATING HIS EYES.
EMPL WASS FIXING 4" WATER LINE ON SURFACE ON SDIE ON SPOIL PILE & TWISTED KNEE DUE TO WATER FREEZING WHERE PIPE BROKE MAKING IT VERY SLIPPERY.
ROOF FALL FELL 3+60FT OFF#1 MAIN IN #1 ENTRY OF #2 MAIN FALL WAS IN SLATE ROOF & FELL UP ABOUT 6FT AREA WAS BOLTED WITH STRAPS & 4FT BOLTS WITH 4-6FT BOLTS IN INTERSECTION THE FALL OCCURED WHE RE THE SLATE ROOF CHANGED OVER TO 52ND ROCK FOR THE IMMEDIATE ROOF FALL WAS 17FT WIDE ENTRIES BY 40FT LONG & FROM 4FT TO 9FT THICK
EMPL HANDED 4' ROOF BOLT TO BOLTER OPERATOR & TURNED TO GO BACK ALONG MACHINE WHEN HE TURNED AROUND EMPL EXPOSED LOWERBACK IN BY PERMANENET BOLT & STRAP ROOF COAL FROM 2" TO 4" THICK BROKE OFF & 7' LONG AT BOLTS STRIKING HIM ON LOWER BACK.
ROOF FALL OCCURRED #2 ENTIRE INTERSECTION 4/15.FALL MEASURED 22'X 12.CLAY VEIN,WEDGE 5'IN CENTER OF FALL TO 0 ON BOTH ENDS.