Buscar en el registro

WHILE STRIPPING COLD POUR FROM PUMP CABLE WITH A KNIFE, THE KNIFE SLIPPED AND CUT MY RT HAND.

WORKING ON A STEP LADDER IN AN AXLE BOX. WENT TO STEP DOWN AND MISSED A STEP CAUSING PAIN IN LOWER BACK.

INSTALLING A FITTING ON A 2" PIECE OF PIPE FOR A DEWATERING PUMP. FITTING BOUND UP AND TWISTED EE'S RIGHT THUMB AROUND FITTING CAUSING A LACERATION.

PLACED HAND ON TOP OF ROTARY VALVE AND FINGER WAS PULLED INTO VALVE. PARTIAL AMPUTATION OF TIP OF MIDDLE FINGER ON RT. HAND.

OPERATOR WAS BOARDING A 992 LOADER. HIS RIGHT HAND MISSED THE GRAB IRON AND FELL TO THE GROUND LANDING ON HIS BUTTOCKS. AFTER 3 HRS HE NOTICED PAIN IN BACK.

LIFTING A GARBAGE CAN WITH USED OIL FILTERS FROMTHE BACK OF THE LUBE TRUCK. HE TURNED TO SET THECAN DOWN FROM THE TRUCK AND FELT PAIN IN HIS BACK.

EMPLOYEE WAS SERVICING A KAMATSU FRONT END LOADER. HE TURNED TO THE SIDE AND STRUCK HIS ELBOW ON THE HYDRAULIC TANK CAUSING BRUISING AND SWELLING.

WHILE CUTTING PRIMACORD WITH A RETRACTABLE RAZOREMPLOYEE WAS CUTTING TOWARDS HIMSELF WHEN PRIMACORD WAS CUT. HE CUT HIS RIGHT LEG BELOW THE KNEE.

CHECKING SPROCKET SEGMENT ON D11 DOZER. SLIDE OFF THE PUSH BEAN TO THE GROUND TO DISAMBARK. RT KNEE GAVE WAY

OPERATING A SCRAPER AND BACK BECAME SORE.

THE EE ALLEGED THAT WHILE WORKING ON A PIECE OF EQUIPMENT HE STRAINED HIS NECK CAUSING IT TO BE SORE.

EE STEPPED DOWN FROM THE REAR ENGINE COMPARTMENTON 037 FRONT END LOADER & TWISTED HIS RT ANKLE

EE SLIPPED ON ICE AND TWISTED BACK WHILE CATCHING HIMSELF.

EE WAS USING A FRONT END LOADER TO MOVE A DE WATERING PUMP. WHILE PARKED AT THE FUEL ISLAND WITH THE LOADED SECURED IN THE PARK POSITION HE REACHED TO CHECK THE FUEL IN THE PUMP. A PIECE OF MU D. FELL FROM THE LOADER BUCKET AND STRUCK HIM. HE SUFFERED LACERATION TO THE HEAD AND A BROKEN BONE IN HIS FOOT.

THE INJ WAS CLIMBING AN ACCESS LADDER WHEN HE HIT THE CATCH BAR AT THE TOP OF THE LADDER WITH HIS HEAD JAMMING HIS TEETH TOGETHER BREAKING ONE OFF

THE INJURED CUT HIS RIGHT HAND ON A PIECE OF ANGLE IRON WHILE TRYING TO PREVENT A FALL.

EE WAS UNLOADING BOOSTERS FROM A TRUCK MAGAZINE WHEN HE CUT HIS RIGHT ELBOW ON THE MAGAZINE DOOR. HE WENT TO THE DR & RECEIVED STITCHES, & WAS THEN RELEASED TO WORK. THE DOOR WAS BLOWN AGAINS T HIS ARM BY THE WIND, & THE EDGE OF THE DOOR WAS UNROUNDED AND SHARP.

THE INJURED WAS TRYING TO REACH A MOTOR. HE TURNED HIS BODY TO THE SITE REACHED OVER ANOTHER MOTOR AND PULLED WITH HIS LEFT HAND USING HIS BODY FOR LEVERAGE. HE FELT HIS LEFT BOTTOM RIB MUSCLE TEAR

THE INJURED WAS ADJUSTING TRACK ON A CATEPILLAR D-10N DOZER. AFTER PUMPING UP THE TRACK ADJUSTER WITH GREASE, THE INJURED CHECKED THE TRACK CLEARANCE WITH HIS RIGHT HAND. WHILE CHECKING THE TR ACK SUDDENLY COLLOPSED ON HIS HAND.

THE INJURED WAS BUILDING A SMALL METAL TRAILER. A PIECE OF CHANNEL STEEL FELL DOWN AND STRUCK.

THE INJURED WAS RAKING CLINKERS OUT OF COAL FIRED HOT WATER GENERATOR. HER RAKE GOT STUCK . SHE GAVE IT A STRONG ULL HER LITTLE FINGER WAS OVER THE END OF THE RAKE HANDLE. SHE SMASHED HER FING ER BETWEEN THE END OF THE HANDLE AND THE I BEAM BEHIND HER.

THE INJURED WAS PUTTING THE DRIVE SHAFT BACK ONTO A HAUL TRUCK. WHILE LINING UP THE SHAFT ON THEOUTPUT FLANGE THE SHAFT SLIPPED, FELL AND PINCHED THE LAS DIGIT OF HIS THUMB BETWEEN THE U-JOINT AND THE FRAME CROSS MEMBER BELOW. THIS BROKE THE LAST DIGIT INTO 8 PIECES.