Buscar en el registro

Employee was moving miner cable out of the way, strained lower back.

Employee was helping roof bolt machine operator move to another location and strained lower back (slip & fall). (Employee starting missing 03/13/06.)

A rock fall occured at the number 8 entry while making returns. The fall measured 40 foot long, 20 foot wide, 10 foot thick. The top was bolted with 6 foot resin bolts and 10 foot cable bolts

A rock fall occured in number one entry on left return for 007 section on number four main belt. A continous fall from previous rock fall. The rock fall was 130' long, 20' wide, 4-10' thick.

Employee was operating roof bolting machine and felt pain in lower back.

Employee was working on a roof bolter, screwdriver fell off boom and struck right eye.

Employee recieved small cut right hand while opening an oil can.

Employee was cutting belt, the knife slipped resulting in a cut on the right leg just above the knee.

Employee was cleaning coal in pit, using a 988G Cat loader, when the rear of the loader bumped the wall.

Employee was geting out of repairman's buggy, slipped and fell in mud.

Employee was spraying plaster on bratttice, the end of the spray nozzle blew off striking him in the left eye.

Employee was hanging curtain using knife to cut curtain, cut middle finger on right hand

Employee was bolting top when a rock approximately 200 pounds fell striking his left hand, causing injury to three fingers on the left hand

A roof fall occured on the 006 section in 6 right over to intersection of 7 right. The rock fall measured 24 foot long, 18 foot wide and 7 foot thick.

Employe was climbing off dozer, felt sharp pain in lower back.

Employee was tramming a ram car, lost brakes, hit panic bar causing head and neck pain

Employee was bolting top and twisted right knee.

Employee was removing a bit lug from a continuous miner, a piece of metal struck employee in right leg.

Employee was removing a metal shipping band from a pallet of screens, the band snapped and struck employee on right fore finger resulting in a laceration.

Employe was drilling hole for roof bolt, when a piece of rock fell striking him in the ankle.

A rock fall occured at the number 6 entry 1 cut inby the number 8 head drive. The fall measured approximately 6 to 9 feet in height, approximately 50 foot long, and 20 foot wide.

Employee was drilling a hole for a tail piece, slipped and fell back on his left hand resulting in a sprain.

Employee picked up drive shaft, the shaft slipped catching left ring finger under drive shaft.

A rock fall occured in the intake in the number 6 entry 3 breaks out by the number 2 tail piece, one break in by spad number 1266.

Employee was changing miner bits and struck his left thumb with a hammer.

A rock fall occured in bleeder line one break above regulator in #5 entry. rock fall did not affect regulator. Rock fall measured 30'L. X 20' W. X 5' H.

Employee was loading glue on roof bolter, felt pain in lower back

Employee was getting out of mantrip, felt pain in lower back, starting missing work 12/09/2005

Employee was operating a ram car, twisted around in the seat and felt pain in his right shoulder.

Employee was climbing onto drill when his foot slipped on step resulting in a pulled muscle to the left shoulder.

Employee was operating scoop, when machine hit coal rib causing the rib to fall, resulting in laceration to top of left hand.

Employee was taking steel beams down with scoop, when beam fell striking him on right leg.

The mine experienced a rock fall in the #5 entry (Belt) 1 break across from spad #3268. The fall measured 35'L X 20'W X 5'H.

The mine experienced a number of roof falls at the face of 001 super-section. The falls were in the #2 entry, #6 and 6 right entry, and #1 and 1 right entry.

This mine experienced a rock fall in the #7 entry approx. 80' feet inby spad #3047. The fall measured 20'L X 20'W X 4.5'H.

Employee was striking a pick breaker conveyor chain on a feeder and a piece of metal came loose striking him in the right eye lid.

Employee had a heart attack (Acute Myocardial Infraction) according to the corner and autopsy results.

Employee was climbing ladder on rock truck and twisted his right knee resulting in a fracture.

A roof fall occured on the 002-0 MMU. The fall extended from the face of the #3 entry to the intersection. The fall measured 30'L X 20'W X 48"H.

Employee was removing drill steel from pot on roof bolter and got struck by a rock on his right thumb causing a fracture in the first joint.

EMPLOYEE WAS ON FOURTH FLOOR OF THE PREP PLANT AND COLLAPSED.

This mine experienced a rock fall that measured 18'W X 65'L X 15'H one break inby spad number 3103.

Employee was lifting lid on miner and felt pain in lower back. Started missing 5/19/2005.

A rock fall was found in the right return entry at spad number 1808. The fall measured 20'W X 30'L X 8'H.

Employee was pulling miner cable and felt pain in lower back. Started missing work on 3/22/2005.

Employee was shoveling tailpiece and fell backwards and landing on a piece of rock. Started missing work 3/17/2005.

A roof fall ocurred in the #8 entry 3 breaks inby spad #1872. The fall measured 20'W X 20'L X 8'H.

Employee felt pain in his left elbow. Employee went to doctor and found out it is caused by repetitive motion. Started missing work on 3/11/2005.

Employee was walking down steps from safety office and fell, cutting his right arm.

Employee was cutting a piece of belt and the knife slipped cutting his little finger on his left hand.