For unexplained reasons, the miner gained access to a secondary road, adjacent from where he was instructed to do road maintenance. Miner removed berm and came too close to road edge, loosing control of equipment and falling through a steep slope, rolling over with the machine. This resulted in miners death. Miner was not wearing seat belt.
Canarico Quarries: 2 muertes registradas Metal/Non-Metal
Canarico Quarries tiene $197K en multas propuestas de MSHA y $0 pendientes en 6 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Canarico Quarries.
- Muertes
- 2
- Incidentes totales
- 65
- Años en registro
- 1985–2024
- Último incidente
- Nov 2024
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.ⓘ
Una orden bajo la Sección 107(a) retira a los mineros de un área cuando un inspector detecta un peligro inminente. Cada orden se levanta una vez corregida la condición, por lo que esto cuenta las órdenes emitidas, no las que están en vigor ahora.Canarico Quarries tiene $197K en multas propuestas de MSHA y $0 pendientes en 6 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Impugnar una citación ante la Comisión Federal de Revisión de Seguridad y Salud Minera es un derecho legal. Estas cifras presentan los resultados públicos de ese proceso, según el archivo de Violaciones Impugnadas de MSHA.- Conciliadas 7 · 78%
- Quedaron como emitidas 2 · 22%
ⓘ
Una citación Significativa y Sustancial cuenta como sobreviviente cuando la conciliación o la decisión del juez mantuvo la designación, o cuando la impugnación fue desestimada o quedó en rebeldía y la citación quedó como emitida. Las citaciones anuladas o retiradas, y las conciliaciones que quitaron la designación, cuentan en contra.ⓘ
Una reducción o desestimación ante la Comisión es un resultado legítimo de impugnar una multa propuesta. Las cifras son el monto propuesto y el monto confirmado en la decisión del expediente.| Expediente | Decisión | Juez | Año | Propuesta / confirmada |
|---|---|---|---|---|
| SE 2008-983M | Settlement | Miller | 2011 | $85K → $50K |
| SE 20022002M | Settlement | Barbour | 2002 | $80K → $68K |
| SE 2025-0064 | Settlement | Young | 2025 | $4K → $2K |
| SE 2010-807M | Default | Lesnick | 2011 | $1K → $1K |
| SE 2008-275M | Settlement | Lesnick | 2009 | $540 → $405 |
| SE 2008-276M | Settlement | Lesnick | 2009 | $100 → $75 |
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Contaminantes en minas de metal y no metal (muestras personales)
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.
Última medición: 2024-09-24
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.- Nuisance dust, respirable, <1% Qtz14
- Nuisance dust, total, <1% Qtz8
- Aluminum oxide dust6
- Arsenic dust6
Ver los análisis individuales (100)
| Fecha | Contaminante | Concentración | Límite | Conc / límite | Ocupación |
|---|---|---|---|---|---|
| 2024-09-24 | Nuisance dust, total, <1% Qtz | 1.34 | 10 | 0.13 | Bobcat Operator |
| 2024-09-24 | Nuisance dust, total, <1% Qtz | 0 | 10 | 0.00 | Packaging Operations Worker |
| 2021-07-29 | Nuisance dust, respirable, <1% Qtz | 0.28 | 10 | 0.03 | Bagging Operator |
| 2021-07-29 | Nuisance dust, respirable, <1% Qtz | 0.71 | 10 | 0.07 | Crusher Oper/Worker |
| 2021-07-29 | Nuisance dust, respirable, <1% Qtz | 0.43 | 10 | 0.04 | Utility Man |
| 2020-02-06 | Nuisance dust, respirable, <1% Qtz | 0.33 | 10 | 0.03 | Cleanup Man |
| 2020-02-06 | Nuisance dust, total, <1% Qtz | 6.39 | 10 | 0.64 | Crusher Oper/Worker |
| 2020-02-06 | Nuisance dust, respirable, <1% Qtz | 0.27 | 10 | 0.03 | Front-end Loader Operator |
| 2017-07-19 | Nuisance dust, respirable, <1% Qtz | 0.29 | 10 | 0.03 | Crusher Oper/Worker |
| 2017-07-19 | Nuisance dust, respirable, <1% Qtz | 0.32 | 10 | 0.03 | Crusher Oper/Worker |
| 2017-07-19 | Nuisance dust, respirable, <1% Qtz | 0.4 | 10 | 0.04 | Bobcat Operator |
| 2017-07-19 | Nuisance dust, respirable, <1% Qtz | 1.1 | 10 | 0.11 | Bagging Operator |
| 2016-08-10 | Nuisance dust, total, <1% Qtz | 4.96 | 10 | 0.50 | Packaging Operations Worker |
| 2016-08-10 | Nuisance dust, respirable, <1% Qtz | 0.35 | 10 | 0.04 | Crusher Oper/Worker |
| 2013-02-20 | Quartz, respirable, >1% Qtz | 0.3 | 2.25 | 0.13 | Bulldozer Operator |
| 2013-02-20 | Nuisance dust, total, <1% Qtz | 4.62 | 10 | 0.46 | Crusher Oper/Worker |
| 2013-02-20 | Nuisance dust, total, <1% Qtz | 0.43 | 10 | 0.04 | Backhoe Operator |
| 2013-02-20 | Nuisance dust, respirable, <1% Qtz | 0.55 | 10 | 0.06 | Crusher Oper/Worker |
| 2012-01-26 | Nickel fumes | 0 | 1 | 0.00 | Welder, etc. |
| 2012-01-26 | Vanadium fumes | 0.4 | 50 | 0.01 | Welder, etc. |
| 2012-01-26 | Zinc oxide fumes | 0.02 | 5 | 0.00 | Welder, etc. |
| 2012-01-26 | Beryllium fumes | 0 | 2 | 0.00 | Welder, etc. |
| 2012-01-26 | Arsenic fumes | 1.29 | 500 | 0.00 | Welder, etc. |
| 2012-01-26 | Cadmium oxide fumes | 0 | 100 | 0.00 | Welder, etc. |
| 2012-01-26 | Chromium, insoluble | 0 | 1 | 0.00 | Welder, etc. |
| 2012-01-26 | Cobalt fumes | 0.06 | 100 | 0.00 | Welder, etc. |
| 2012-01-26 | Copper fumes | 2.35 | 100 | 0.02 | Welder, etc. |
| 2012-01-26 | Iron oxide fumes | 0.29 | 10 | 0.03 | Welder, etc. |
| 2012-01-26 | Lead fumes | 0 | 150 | 0.00 | Welder, etc. |
| 2012-01-26 | Magnesium oxide fumes | 0.09 | 10 | 0.01 | Welder, etc. |
| 2012-01-26 | Manganese fumes | 0.01 | 5 | 0.00 | Welder, etc. |
| 2012-01-26 | Molybdenum fumes | 0 | 10 | 0.00 | Welder, etc. |
| 2009-05-13 | Nuisance dust, total, <1% Qtz | 0 | 10 | 0.00 | Crusher Oper/Worker |
| 2009-05-13 | Nuisance dust, total, <1% Qtz | 1.67 | 10 | 0.17 | Crusher Oper/Worker |
| 2005-08-09 | Nuisance dust, respirable, <1% Qtz | 0.46 | 10 | 0.05 | Crusher Oper/Worker |
| 2005-08-09 | Nuisance dust, respirable, <1% Qtz | 0.14 | 10 | 0.01 | Backhoe Operator |
| 2004-12-21 | Nuisance dust, respirable, <1% Qtz | 0.41 | 10 | 0.04 | Belt Cleaner |
| 2004-01-21 | Lead, inorganic dust | 0 | 150 | 0.00 | Crusher Oper/Worker |
| 2004-01-21 | Manganese dust | 0 | 5 | 0.00 | Crusher Oper/Worker |
| 2004-01-21 | Molybdenum dust | 0 | 10 | 0.00 | Crusher Oper/Worker |
| 2004-01-21 | Nickel dust & salts | 0 | 1 | 0.00 | Crusher Oper/Worker |
| 2004-01-21 | Titanium dioxide dust | 0 | 10 | 0.00 | Crusher Oper/Worker |
| 2004-01-21 | Vanadium dust | 0 | 500 | 0.00 | Crusher Oper/Worker |
| 2004-01-21 | Aluminum oxide dust | 0 | 10 | 0.00 | Crusher Oper/Worker |
| 2004-01-21 | Arsenic dust | 0 | 500 | 0.00 | Crusher Oper/Worker |
| 2004-01-21 | Beryllium dust | 0 | 2 | 0.00 | Crusher Oper/Worker |
| 2004-01-21 | Cadmium dust & salts | 0 | 200 | 0.00 | Crusher Oper/Worker |
| 2004-01-21 | Chromium, soluble | 0 | 500 | 0.00 | Crusher Oper/Worker |
| 2004-01-21 | Cobalt dust | 0 | 100 | 0.00 | Crusher Oper/Worker |
| 2004-01-21 | Copper dust and mist | 0 | 1 | 0.00 | Crusher Oper/Worker |
| 2004-01-21 | Iron soluble salts | 0 | 1 | 0.00 | Crusher Oper/Worker |
| 2004-01-21 | Lead, inorganic dust | 0 | 150 | 0.00 | Crusher Oper/Worker |
| 2004-01-21 | Manganese dust | 0 | 5 | 0.00 | Crusher Oper/Worker |
| 2004-01-21 | Molybdenum dust | 0 | 10 | 0.00 | Crusher Oper/Worker |
| 2004-01-21 | Nickel dust & salts | 0 | 1 | 0.00 | Crusher Oper/Worker |
| 2004-01-21 | Titanium dioxide dust | 0 | 10 | 0.00 | Crusher Oper/Worker |
| 2004-01-21 | Vanadium dust | 0 | 500 | 0.00 | Crusher Oper/Worker |
| 2004-01-21 | Aluminum oxide dust | 0 | 10 | 0.00 | Belt Cleaner |
| 2004-01-21 | Arsenic dust | 0 | 500 | 0.00 | Belt Cleaner |
| 2004-01-21 | Beryllium dust | 0 | 2 | 0.00 | Belt Cleaner |
| 2004-01-21 | Cadmium dust & salts | 0 | 200 | 0.00 | Belt Cleaner |
| 2004-01-21 | Chromium, soluble | 0 | 500 | 0.00 | Belt Cleaner |
| 2004-01-21 | Cobalt dust | 0 | 100 | 0.00 | Belt Cleaner |
| 2004-01-21 | Copper dust and mist | 0 | 1 | 0.00 | Belt Cleaner |
| 2004-01-21 | Iron soluble salts | 0 | 1 | 0.00 | Belt Cleaner |
| 2004-01-21 | Lead, inorganic dust | 0 | 150 | 0.00 | Belt Cleaner |
| 2004-01-21 | Manganese dust | 0 | 5 | 0.00 | Belt Cleaner |
| 2004-01-21 | Molybdenum dust | 0 | 10 | 0.00 | Belt Cleaner |
| 2004-01-21 | Nickel dust & salts | 0 | 1 | 0.00 | Belt Cleaner |
| 2004-01-21 | Titanium dioxide dust | 0 | 10 | 0.00 | Belt Cleaner |
| 2004-01-21 | Vanadium dust | 0 | 500 | 0.00 | Belt Cleaner |
| 2004-01-21 | Aluminum oxide dust | 0 | 10 | 0.00 | Scraper Operator |
| 2004-01-21 | Arsenic dust | 0 | 500 | 0.00 | Scraper Operator |
| 2004-01-21 | Beryllium dust | 0 | 2 | 0.00 | Scraper Operator |
| 2004-01-21 | Cadmium dust & salts | 0 | 200 | 0.00 | Scraper Operator |
| 2004-01-21 | Cobalt dust | 0 | 100 | 0.00 | Scraper Operator |
| 2004-01-21 | Copper dust and mist | 0 | 1 | 0.00 | Scraper Operator |
| 2004-01-21 | Iron soluble salts | 0 | 1 | 0.00 | Scraper Operator |
| 2004-01-21 | Lead, inorganic dust | 0 | 150 | 0.00 | Scraper Operator |
| 2004-01-21 | Manganese dust | 0 | 5 | 0.00 | Scraper Operator |
| 2004-01-21 | Molybdenum dust | 0 | 10 | 0.00 | Scraper Operator |
| 2004-01-21 | Nickel dust & salts | 0 | 1 | 0.00 | Scraper Operator |
| 2004-01-21 | Titanium dioxide dust | 0 | 10 | 0.00 | Scraper Operator |
| 2004-01-21 | Vanadium dust | 0 | 500 | 0.00 | Scraper Operator |
| 2004-01-21 | Chromium, soluble | 0 | 500 | 0.00 | Scraper Operator |
| 2004-01-21 | Aluminum oxide dust | 0 | 10 | 0.00 | Mechanic |
| 2004-01-21 | Arsenic dust | 0 | 500 | 0.00 | Mechanic |
| 2004-01-21 | Beryllium dust | 0 | 2 | 0.00 | Mechanic |
| 2004-01-21 | Cadmium dust & salts | 0 | 200 | 0.00 | Mechanic |
| 2004-01-21 | Chromium, soluble | 0 | 500 | 0.00 | Mechanic |
| 2004-01-21 | Cobalt dust | 0 | 100 | 0.00 | Mechanic |
| 2004-01-21 | Copper dust and mist | 0 | 1 | 0.00 | Mechanic |
| 2004-01-21 | Iron soluble salts | 0 | 1 | 0.00 | Mechanic |
| 2004-01-21 | Lead, inorganic dust | 0 | 150 | 0.00 | Mechanic |
| 2004-01-21 | Manganese dust | 0 | 5 | 0.00 | Mechanic |
| 2004-01-21 | Molybdenum dust | 0 | 10 | 0.00 | Mechanic |
| 2004-01-21 | Nickel dust & salts | 0 | 1 | 0.00 | Mechanic |
| 2004-01-21 | Titanium dioxide dust | 0 | 10 | 0.00 | Mechanic |
| 2004-01-21 | Vanadium dust | 0 | 500 | 0.00 | Mechanic |
| 2004-01-21 | Aluminum oxide dust | 0 | 10 | 0.00 | Bagging Operator |
Canarico Quarries registró 0.00 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2025.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.| Año | tasa de casos totales | días perdidos | mortales |
|---|---|---|---|
| 2025 | 0.00 | 0.00 | 0.000 |
| 2024 | 1.72 | 1.72 | 0.000 |
| 2023 | 0.00 | 0.00 | 0.000 |
| 2022 | 0.00 | 0.00 | 0.000 |
| 2021 | 1.63 | 1.63 | 0.000 |
| 2020 | 0.00 | 0.00 | 0.000 |
| 2019 * | 0.00 | 0.00 | 0.000 |
| 2018 * | 0.00 | 0.00 | 0.000 |
- Canarico Quarries Inc 1950 a 1996
- Canarico Quarries Inc 1996 al presente
| Año | Empleados |
|---|---|
| 2026 | 52 |
| 2025 | 52 |
| 2024 | 49 |
| 2023 | 47 |
| 2022 | 46 |
| 2021 | 47 |
| 2020 | 42 |
| 2019 | 41 |
| 2018 | 39 |
| 2017 | 41 |
| 2016 | 44 |
| 2015 | 48 |
| 2014 | 52 |
| 2013 | 51 |
| 2012 | 47 |
| 2011 | 45 |
| 2010 | 46 |
| 2009 | 51 |
| 2008 | 58 |
| 2007 | 67 |
| 2006 | 72 |
| 2005 | 78 |
| 2004 | 83 |
| 2003 | 85 |
| 2002 | 86 |
| 2001 | 83 |
| 2000 | 81 |
Canarico Quarries se ubica en Santa Isabel Municipio, Puerto Rico, donde la categoría minera del Censo representa el 0.0% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2026 Q2 | 32,514 | 0 | 0 | 0.0 |
| 2026 Q1 | 26,535 | 1 | 1 | 37.7 |
| 2025 Q4 | 31,761 | 0 | 0 | 0.0 |
| 2025 Q3 | 28,685 | 0 | 0 | 0.0 |
| 2025 Q2 | 35,039 | 0 | 0 | 0.0 |
| 2025 Q1 | 27,208 | 0 | 0 | 0.0 |
| 2024 Q4 | 33,106 | 3 | 3 | 90.6 |
| 2024 Q3 | 26,564 | 4 | 1 | 150.6 |
Mostrar 98 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2024 Q2 | 32,109 | 0 | 0 | 0.0 |
| 2024 Q1 | 24,493 | 3 | 0 | 122.5 |
| 2023 Q4 | 27,929 | 0 | 0 | 0.0 |
| 2023 Q3 | 25,966 | 2 | 0 | 77.0 |
| 2023 Q2 | 30,046 | 0 | 0 | 0.0 |
| 2023 Q1 | 24,565 | 0 | 0 | 0.0 |
| 2022 Q4 | 27,210 | 0 | 0 | 0.0 |
| 2022 Q3 | 23,677 | 2 | 0 | 84.5 |
| 2022 Q2 | 31,644 | 0 | 0 | 0.0 |
| 2022 Q1 | 26,715 | 2 | 0 | 74.9 |
| 2021 Q4 | 32,343 | 0 | 0 | 0.0 |
| 2021 Q3 | 28,695 | 3 | 1 | 104.5 |
| 2021 Q2 | 33,738 | 0 | 0 | 0.0 |
| 2021 Q1 | 27,983 | 3 | 1 | 107.2 |
| 2020 Q4 | 31,183 | 0 | 0 | 0.0 |
| 2020 Q3 | 29,366 | 1 | 0 | 34.1 |
| 2020 Q2 | 18,713 | 0 | 0 | 0.0 |
| 2020 Q1 | 21,286 | 2 | 0 | 94.0 |
| 2019 Q4 | 25,804 | 0 | 0 | 0.0 |
| 2019 Q3 | 24,120 | 1 | 0 | 41.5 |
| 2019 Q2 | 20,586 | 0 | 0 | 0.0 |
| 2019 Q1 | 22,479 | 2 | 0 | 89.0 |
| 2018 Q4 | 20,028 | 0 | 0 | 0.0 |
| 2018 Q3 | 22,877 | 3 | 0 | 131.1 |
| 2018 Q2 | 19,554 | 0 | 0 | 0.0 |
| 2018 Q1 | 20,050 | 1 | 0 | 49.9 |
| 2017 Q4 | 11,809 | 0 | 0 | 0.0 |
| 2017 Q3 | 19,968 | 1 | 0 | 50.1 |
| 2017 Q2 | 20,488 | 0 | 0 | 0.0 |
| 2017 Q1 | 22,367 | 0 | 0 | 0.0 |
| 2016 Q4 | 19,860 | 0 | 0 | 0.0 |
| 2016 Q3 | 22,157 | 1 | 0 | 45.1 |
| 2016 Q2 | 20,393 | 0 | 0 | 0.0 |
| 2016 Q1 | 20,014 | 3 | 1 | 149.9 |
| 2015 Q4 | 20,409 | 0 | 0 | 0.0 |
| 2015 Q3 | 24,231 | 2 | 0 | 82.5 |
| 2015 Q2 | 27,810 | 0 | 0 | 0.0 |
| 2015 Q1 | 20,519 | 0 | 0 | 0.0 |
| 2014 Q4 | 25,900 | 0 | 0 | 0.0 |
| 2014 Q3 | 22,890 | 1 | 0 | 43.7 |
| 2014 Q2 | 27,245 | 0 | 0 | 0.0 |
| 2014 Q1 | 20,639 | 1 | 0 | 48.5 |
| 2013 Q4 | 27,937 | 0 | 0 | 0.0 |
| 2013 Q3 | 23,264 | 0 | 0 | 0.0 |
| 2013 Q2 | 29,429 | 9 | 3 | 305.8 |
| 2013 Q1 | 23,460 | 2 | 0 | 85.3 |
| 2012 Q4 | 20,397 | 0 | 0 | 0.0 |
| 2012 Q3 | 23,087 | 3 | 1 | 129.9 |
| 2012 Q2 | 30,944 | 0 | 0 | 0.0 |
| 2012 Q1 | 16,884 | 0 | 0 | 0.0 |
| 2011 Q4 | 26,932 | 3 | 1 | 111.4 |
| 2011 Q3 | 20,835 | 1 | 1 | 48.0 |
| 2011 Q2 | 24,959 | 0 | 0 | 0.0 |
| 2011 Q1 | 16,592 | 5 | 2 | 301.4 |
| 2010 Q4 | 19,679 | 0 | 0 | 0.0 |
| 2010 Q3 | 18,808 | 2 | 1 | 106.3 |
| 2010 Q2 | 19,081 | 0 | 0 | 0.0 |
| 2010 Q1 | 18,709 | 2 | 0 | 106.9 |
| 2009 Q4 | 20,313 | 0 | 0 | 0.0 |
| 2009 Q3 | 21,040 | 0 | 0 | 0.0 |
| 2009 Q2 | 21,294 | 3 | 1 | 140.9 |
| 2009 Q1 | 23,585 | 0 | 0 | 0.0 |
| 2008 Q4 | 28,970 | 5 | 3 | 172.6 |
| 2008 Q3 | 26,903 | 4 | 2 | 148.7 |
| 2008 Q2 | 31,605 | 1 | 0 | 31.6 |
| 2008 Q1 | 32,814 | 1 | 1 | 30.5 |
| 2007 Q4 | 35,568 | 12 | 5 | 337.4 |
| 2007 Q3 | 34,373 | 1 | 0 | 29.1 |
| 2007 Q2 | 41,515 | 1 | 0 | 24.1 |
| 2007 Q1 | 35,530 | 3 | 2 | 84.4 |
| 2006 Q4 | 40,709 | 0 | 0 | 0.0 |
| 2006 Q3 | 38,077 | 2 | 0 | 52.5 |
| 2006 Q2 | 42,827 | 0 | 0 | 0.0 |
| 2006 Q1 | 41,330 | 0 | 0 | 0.0 |
| 2005 Q4 | 43,498 | 0 | 0 | 0.0 |
| 2005 Q3 | 40,897 | 3 | 1 | 73.4 |
| 2005 Q2 | 44,570 | 0 | 0 | 0.0 |
| 2005 Q1 | 42,317 | 0 | 0 | 0.0 |
| 2004 Q4 | 47,933 | 3 | 2 | 62.6 |
| 2004 Q3 | 47,284 | 0 | 0 | 0.0 |
| 2004 Q2 | 48,792 | 0 | 0 | 0.0 |
| 2004 Q1 | 49,688 | 3 | 1 | 60.4 |
| 2003 Q4 | 51,865 | 0 | 0 | 0.0 |
| 2003 Q3 | 47,412 | 0 | 0 | 0.0 |
| 2003 Q2 | 51,874 | 0 | 0 | 0.0 |
| 2003 Q1 | 45,397 | 0 | 0 | 0.0 |
| 2002 Q4 | 53,679 | 3 | 2 | 55.9 |
| 2002 Q3 | 51,841 | 0 | 0 | 0.0 |
| 2002 Q2 | 49,296 | 6 | 1 | 121.7 |
| 2002 Q1 | 42,281 | 1 | 0 | 23.7 |
| 2001 Q4 | 47,898 | 0 | 0 | 0.0 |
| 2001 Q3 | 46,211 | 0 | 0 | 0.0 |
| 2001 Q2 | 48,220 | 0 | 0 | 0.0 |
| 2001 Q1 | 46,129 | 1 | 0 | 21.7 |
| 2000 Q4 | 44,123 | 0 | 0 | 0.0 |
| 2000 Q3 | 41,819 | 8 | 5 | 191.3 |
| 2000 Q2 | 43,533 | 0 | 0 | 0.0 |
| 2000 Q1 | 40,851 | 0 | 0 | 0.0 |
Muertes en esta mina
2 registradasA FATA ACCIDENT ACCOURED IN THE BC-03 PRIMARY CRUSHER AREA. THE GEHL MODEL 3825 SKID STEER LOADER OPEARTOR WAS PINNED BETWEEN THE BUCKET ARM AND FRONT FRAME CRUSHIG HIS HEAD.
Incidentes reportables
63 en archivo (excluyendo las muertes anteriores)2024 · 1 incidente
EE works for Securitas Security Services of PR, a company contracted to provide security services. EE claims that EE fell from a four-track in front of the entrance to the shop. This fall caused EE injuries to EE's head, back and legs.
2021 · 1 incidente
When the door of the machine was closed, the middle finger of the right hand was caught.
2014 · 2 incidentes
He was working on the removal of a cover focus. When cover focus loosen pricking his finger between the cover and railing of the manlift.
He suffered a cut on the finger of the right hand. This happened while cutting chain with acetylene the D-11N. He put his hand on the chain that stay suspended in the final drive, but by cutting the link chain moved and pinched his finger.
2013 · 1 incidente
He slipped down from the excavator 330 L injuring his face.
2008 · 1 incidente
Employee climbed the stairs on a dump truck that was loading material beneath a storage silo to verify the quantity of material being loaded. While descending down the stairs, employee's wedding ring became entangled in the stairs causing injury to one of employee's fingers.
2007 · 2 incidentes
While employee was lubricating some part of a Caterpillar Loader 988, he signaled the operator of the loader to move the bucket of the loader. When the operator moved the bucket, the employee got his arm pinched between the loader's bucket and the bucket's boom. Arm got bruised, but apparently no fracture was found.
Allegedly, while employee was tighting a nut in an equipment tire's rim, the wrench left his hand and struck the employee's left eye. The employee received first aid including six stitches.
2006 · 1 incidente
Employee was removing a hydraulic hose from an excavator. After hose was removed, the employee's hand continued to travel because of the force exerted to remove the hose, hitting the excavator boom's pin.
2005 · 3 incidentes
While employee was using a hammer & a bar to remove the pins off the bucket of an excavator, he felt pain on his right elbow.
EE FELT BACK PAIN AND WENT TO THE STATES WORKMANS COMPENSATION FUND
The operator claims that while he was operating a hydraulic excavator, the machine made an abrupt movement and he felt pain in his lower back.
2004 · 1 incidente
Allegedly, EE was changing a drill rod of the drilling machine and felt pain in his lower back.
2003 · 2 incidentes
HE WAS GOING TO LIFT A WOOD PALLET AND HE GOT PINCH WITH NAIL IN HIS LEFT HAND.
AFTER GETTING HIS TRUCK LOADED, EE GOT UP ON TRUCK TO COVER THE MATERIAL. HE WAS TOLD BY ANOTHER EE TO COME DOWN AND THEY BOTH WOULD COVER IT. WHILE COMING DOWN, HE FELL TO THE GROUND. HE TOLD WITNESSES THE HE DIDN'T FEEL HIS LEGS, SO HE WAS MOVED VIA AIR AMBULANCE TO THE STATE MEDICAL CENTER.
2002 · 5 incidentes
CHECKING THE TAILGATE OF A DUMP TRUCK HE SLIPPED AND THE TAILGATE FELL AND PINCHED HIS LEFT HAND RING FINGER.
EE WAS ABSENT THE DAY BEFORE 7-11-02 BECAUSE HE HAD A BACKACHE. THE NEXT DAY HE CAME TO WORK THE NEXT DAY BUT HE STILL HAD THE BACKACHE, WHILE GETTING READY ONE OF THE LOADERS WHICH HE WAS GOI NG TO WELD HIS BACK STARTED TO HURT MORE.
CHECKING A PORTABLE COMPRESSOR THAT HAD TURNED OFF BECAUSE THE COMPRESSOR NEEDED WATER. WHEN TAKING OFF THE TOP, THE EMPLOYEE THOUGHT IT WAS COLD ALREADY BUT THE WATER WAS STILL HOT AND BURNT HIS LEFT ARM.
EMPLOYEE WAS TRYING TO TAKE OUT A PART FROM THE TRUCK WHICH COULD NOT COME OUT. WHEN HE FINALLY WAS ABLE TO TAKE IT OUT HE PULLED IT AND CUT HIS INDEX FINGER OF HIS RIGHT HAND.
HE WAS COMING DOWN THE STAIRS TO DRINK WATER & SLIPPED HURTING HIS WRIST OF HIS RT. HAND.
2001 · 3 incidentes
CLEANING THE PLANT AREA OF THE QUARRY WENT TO PICK UP A PIECE OF SCREEN AND SLIPPED WITH HIS OWN FOOT, FELL AND HURT HIS LEFT WRIST.
HE WAS WORKING WITH A DUMP TRAILER AND A PIECE OF METAL FELL FROM THE DUMP, HITTING HIS LEFT SHOULDER. PUTTING DUMP TRAILER ON THE HITCH.
CLEANING A HOLE, NEXT TO HIM WAS A HOSE WITH OILFOR THE DRILLING MACHINE (TAMROCK RANGER 700). THE HOSE SPLASHED SOME OIL INTO HIS EYE.
2000 · 3 incidentes
CHANGING A TIRE. HURT HIS BACK. WENT TO A PRIVATE DR. DID NOT REPORT IT TO THE OFFICE UNTIL 10-17-00.
SLIPPED AND HURT LEFT FOOT, HAD SAFETY BOOTS.
LIFTING A BAG OF AMONIA OF 55 PDS. TO PUT IN THE PICK-UP TO PROCEDE WITH A BLASTING HURT HIS BACK.
1999 · 1 incidente
EE WENT TO TAKE OUT THE SWEEPING MACHINE TO PUT WATER INTO IT, THE MACHINE SLIPPED ON A ROCK & HE FELL
1998 · 3 incidentes
EE WAS PACKING MARMOLINA AND WHEN HE WENT BACK TO PICKUP A BAG OF MARMOLINA 47 PDS, HE FELT A BAD PAIN IN HIS BACK & COULD NOT KEEP ON WORKING. THE EE HAD A SECURITY BELT ON
HELPING THE MECHANIC TO CHANGE THE TIRE LOST BALANCE AND HURT HIS RIGHT KNEE IN YAUCO.
INSTALLING A STARTER AND BATTERY ON THE MACHINES. HURT HIS BACK.
1997 · 1 incidente
HE WAS REMOVING THE ROLLER FORM THE CONVEYOR BELT. IT WAS RUSTY. HE HIT IT WITH A HAMMER TO LOSSEN IT. A SLIVER BROKE OFF & ENTERED HIS EYE.
1996 · 1 incidente
EMP WAS DRIVING COMPANY DUMP TRUCK LOSDED WITH PLASTERING SAND FROM SILO TO STOCKPILE AREA. TO EXIT FROM SILO, TRUCK HAS TO FIRST BACK UP TO MAIN ROAD, THEN GO DOWNHILL INTO STOCKPILE AREA. EM P HAD PROBLEM CHANGING GEARS FROM REVERSE TO FORWARD AND STARTED TO RUN IN NEUTRAL. GAINED SPEEDAND DID NOT REACT TO BRAKES ON UNPAVED ROAD. EMPJUMPED OUT OF TRUCK. SUFFERED MINOR INJURY.
1995 · 4 incidentes
OPERATOR WAS MOVING THE MACHINE WHEN THE HYDRAULIC BOOM CRACKED, PINCHED THE OPERATOR AGAINST THE MACHINE HURTING HIS RIGHT RIB.
TRUCK WAS FILLED WITH MARMOLINA WHEN HE WAS COMING DOWN, CHANGED SHIFT TO FIRST. THE TRUCK DIDN'T RESPOND AND HE COULDN'T PUT ON THE BRAKES. TRUCK TURNED OVER.
CLEANING THE OUTSIDE OF CORAFIL WITH MACHETE. WHILE HE WAS WORKING WITH THE MACHETE HE HIT A PIECE OF IRON AND THE MACHETE SLIPPED, CUT HIS LEFT HAND FINGER AND THEY HAD TO TAKE TWO STITCHES.
HE WAS INSTALLING A TRACK ROLLER ON THE UNDER CARRIAGE OF A BULLDOZER (D9L0, IT WAS TO HEAVYAND WHEN HE WENT TO PUT IT UP HE SPRAINED HIS BACK.
1994 · 4 incidentes
INSTALLING THE TRACK CHAIN OF A BULLDOZER. THE BELT WHICH WAS HOLDING THE WHEEL CHAIN BROKE. THE COME-ALONG HANGER SLIPPED AND HIT HIS FOREHEAD.
TAKING OUT A UNIVERSAL JOINT FROM A DRIVE SHAFT WITH A HAMMER, SLIPPED AND HIT HIS LEFT HAND THUMB.
RE-OPENNING CASE WITH THE WORKMAN'S COMPENSATION PREMIUM OF PUERTO RICO. THE CASE WAS CLOSED ON 6-91. HE IS RE-OPENNING HIS CASE BECAUSE HE IS HAVING BACK PROBLEMS.
HE WAS CLEENING SOMETHING & SOMETHING FELL IN HIS EYE.
1993 · 3 incidentes
UNLOADING A TRUCK OF OIL CANS WHEN HE TOOK ONE OF THE CANS DOWN THEIR WAS A SHARP EDGE & HE CUT HIS 3 FINGERS FROM HIS RIGHT HAND.
WORKING WITH BLOCK MIX MACHINE WHEN HE STARTED TO GET BACK PAINS.
CHANGING HOSE FROM A LOADER THE HOSE FELL OFF & OIL GOT INTO HIS EYES
1992 · 1 incidente
HE WAS PICKING UP A BUCKET OF SHIPS,THE CATEPILLAR LOST CONTROL.HE THREW HIMSELF FROM THE MACHIN.
1991 · 2 incidentes
WHEN LEAVING DOZER AFTER PERFORMING MAINT. STRUCK SHARP METAL CUTTING SHOULDER RIGHT ONE
LOST BALANCE GRABBED OPEN BIN DOOR CLOSED DOWN PINCHED FOOT
1990 · 1 incidente
GETTING READY TO LIFT POLE THAT CLOSES THE LID ON TRUCK PINCHED FINGERS WITH CONTROL LEVER AN D WALL OF BOX
1989 · 3 incidentes
WHILE ADJUSTING THE ACCELERATOR ON SODERING MACHINE HIS HAND SLIPPED AND WENT INTO THE FAN.
WHILE FREMOVING MATERIAL WITH A SHOVEL HE XXFELT A SHARP PAIN IN THE BACK
ONE STONE GOT STUCK IN THE CRUSHER AND WHEN HE TRIED TO GET IN THE OUT, HE HIT HIS LITTLE FINGER WITH THE HAMMER.
1988 · 3 incidentes
WHILE WAS CLEANING GRAVEL ROAD WITH LOADER HE DROVE IN REVERSE INTO SEDIMENTATION BASIN AND TURNED OVER SUFFERING PAIN IN HIS BACK.
WHILE HE WAS REALIZING CLEANING DUTIES IN PLANT AREA HE SLIPPED & HURT HIS LEFT ARM.
WHILE HE WAS WALKING IN THE PLANT AREA, HE STEPPED ON A ROCK, HURTING HIS RIGHT FOOT.
1987 · 5 incidentes
THE EMPLOYEE AD8UCE HE IS SUFFERING A PIN IN HIS BACK AND THAT IS DUE OF THE JOB HE REALIZE.
WHILE HE WAS MO5ING A ROCK THIS LIPPED FROM HIS RIGHT HAND AND PINCHED HIS LEFT HAND WITH A CEMENT WALL.
WHILE HE WAS TR2ING TO FIT THE PALLA MILL COVER THIS PINCHED HIS FINGERS THUMB AND INDEX OF THE RIGHT HAND.
WHILE WASHING AN ATTERNATOR WITH BRUSH & GAS-HE GOT GAS ON HANDS-THIS MADE HIM GET WATER BLISTERS.
WHILE HE WAS TRYING TO COME DOWN FROM THE SHOVEL, HE SLIPPED AND FELL TO THE GROUND, CLAIMED A BACK PAIN.
1986 · 2 incidentes
USING LIFTING E0UIPMENT TO FREE JAMMED CRUSHER THE HOOK PINCHED FINGER OF HIS LEFT HAND AGAAINST ROCK.
ALTHOUGH GIVEN 5 STEEL BAR TO SET 1 FT-2 FT. STONES IN PLACE (EROSION PROTECTION) OPERATOR DECIDED TO MOVE STONE BY HAND AND PINCHED 1 FINGER BETWEEN 2 STONES.
1985 · 3 incidentes
WHILE HE WAS HO5DING 2 PIPES 4"X30' LONG IN A PLATFORM TRUCK THEY JUMPED & HIT THE WORKER IN HIS FEET.
WORKING ON WELDING EQUIPMENT. A PIECE OF STEEL BAR. WHILE REPAIRING WELDING EQUIPMENT. HE CUT HIS RIGHT HAND ON A BAR WELDING ON THE PICK UP.
STEPPED ON A HI8DEN NAIL, EMBEDDED IN SAND