Mining Incidents
Muerte · Registro MSHA n.º 220200020010

Muerte de Beltman en Marshall County Mine (The Marshall County Coal Company), WV, 23 de diciembre de 2019

a las 4:30 PM

El 23 de diciembre de 2019 murió un trabajador (Beltman) en un accidente de maquinaria en Marshall County Mine (The Marshall County Coal Company), WV.

Marshall County Mine · Underground · Coal
Marshall Condado, WV
Clasificación MAQUINARIA
Tipo Atrapado en, bajo o entre un objeto en movimiento y uno fijo

Seguir esta mina

Avísenme cuando se presente un nuevo incidente de la MSHA en Marshall County Mine.

Narrativa del investigador
A fully trained miner was fatally injured while attempting to remove a splice pin from a 72" mechanical belt splice. The splice was positioned near the outby side of the tail frame. The victim was positioned between the bottom conveyor belt and the top conveyor belt. Investigation is on-going by company, state and federal officials.

Texto original en inglés de la MSHA

Investigación final de la MSHA
On December 23, 2019, at approximately 4:15 p.m., Raymond "Ray" Starkey Jr. (Starkey), a 21-year old general inside laborer, was fatally injured when he was caught between the 72-inch wide belt and the steel frame of the belt tailpiece. The accident occurred because the assembly holding the Cameron Corridor belt in place was not strong enough to withstand tension created during the belt move. The mine operator used belt grippers, lever hoist chains, and lever hoists that were not designed to withstand the forces generated during the move.
Causas fundamentales
  1. The Cameron Corridor belt was not adequately blocked against motion during the belt move.

    Acción correctiva: The mine operator revised and expanded their belt move procedure. The revised procedure requires the belt splice to be positioned at least 100 feet outby the tailpiece. It also requires all belt tension to be removed, which eliminates the need to clamp the belt near the tailpiece. Miners were trained in the revised procedure.

  2. Adequate supervision was not provided while the victim was being task trained.

    Acción correctiva: The mine operator trained miners who perform the supervised portion of task training to ensure trainees are safe while they are being trained.

Hallazgos del informe final de investigación de la MSHA, que sustituye la narrativa preliminar anterior.

Detalles del registro
Actividad al momento del incidente
Machine Maintenance
Subunidad / ubicación
UNDERGROUND
Ubicación subterránea
LAST OPEN CROSSCUT
Método de minería
Other
Tipo de accidente
Atrapado en, bajo o entre un objeto en movimiento y uno fijo
Fuente de la lesión
BELT CONVEYORS
Naturaleza de la lesión
FRACTURE,CHIP
Parte del cuerpo afectada
SKULL
Experiencia minera total
2 years
Experiencia en esta mina
0 years
Experiencia en este puesto
0 years
Grado de la lesión
FATALITY

Muertes relacionadas

Misma clasificación

  • July 1, 2026 · Electrician · Warrior Met Coal BC, LLC, AL
  • May 20, 2026 · Maintenance Man · Pine Branch Mining LLC, KY
  • March 12, 2026 · Maintenance Man · Kennecott Utah Copper LLC, UT
  • March 5, 2026 · Continuous Miner Operator · Patton Mining LLC, IL
  • January 6, 2026 · Maintenance Man · National Cement Company Of California Inc, CA

Mismo año

Verificar en MSHA

Cada registro de esta página refleja lo que publica la MSHA en su programa de Datos Abiertos del Gobierno, actualizado semanalmente. La MSHA no publica URLs por accidente (los datos de Accidentes se distribuyen en un único archivo masivo), así que esta es la forma de recuperar la fuente del registro específico a continuación:

Fuente: Administración de Seguridad y Salud Minera de EE. UU. (MSHA) · Documento 220200020010 · ID de mina 4601437 Vista de capacitación →