Victim was scaling in level 9 north 8 when a large rock fell from the roof crushing the cab of the scale machine causing fatal injuries. The accident is still under investigation by MSHA and the mine operator. The root cause analysis is not complete at this time.
Imerys Ellijay Marble Hill Mine: 1 muerte registrada Metal/Non-Metal
Imerys Ellijay Marble Hill Mine tiene $247K en multas propuestas de MSHA y $0 pendientes en 5 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Imerys Ellijay Marble Hill Mine.
- Muertes
- 1
- Incidentes totales
- 22
- Años en registro
- 1990–2017
- Último incidente
- Dec 2017
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.Imerys Ellijay Marble Hill Mine tiene $247K en multas propuestas de MSHA y $0 pendientes en 5 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Impugnar una citación ante la Comisión Federal de Revisión de Seguridad y Salud Minera es un derecho legal. Estas cifras presentan los resultados públicos de ese proceso, según el archivo de Violaciones Impugnadas de MSHA.- Conciliadas 7 · 50%
- Anuladas o retiradas 7 · 50%
ⓘ
Una citación Significativa y Sustancial cuenta como sobreviviente cuando la conciliación o la decisión del juez mantuvo la designación, o cuando la impugnación fue desestimada o quedó en rebeldía y la citación quedó como emitida. Las citaciones anuladas o retiradas, y las conciliaciones que quitaron la designación, cuentan en contra.ⓘ
Una reducción o desestimación ante la Comisión es un resultado legítimo de impugnar una multa propuesta. Las cifras son el monto propuesto y el monto confirmado en la decisión del expediente.| Expediente | Decisión | Juez | Año | Propuesta / confirmada |
|---|---|---|---|---|
| SE 2009-484M | Settlement | Rae | 2013 | $140K → $109K |
| SE 2010-534M | Settlement | Lewis | 2012 | $24K → $17K |
| SE 2010-134M | Settlement | Gill | 2014 | $19K → $15K |
| SE 2009-421M | Settlement | Miller | 2010 | $4K → $3K |
| SE 2009-857M | Settlement | Lesnick | 2010 | $4K → $426 |
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Contaminantes en minas de metal y no metal (muestras personales)
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.
Última medición: 2021-11-03, hace 4 años
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.- Diesel particulate (total carbon)468 en exceso
- Total Carbon,calculated from elemental carbon.122 en exceso
- Total Carbon,TC122 en exceso
- Nuisance dust, respirable, <1% Qtz17
Ver los análisis individuales (100)
| Fecha | Contaminante | Concentración | Límite | Conc / límite | Ocupación |
|---|---|---|---|---|---|
| 2017-01-24 | TC @ 160 | 165 | 160 | 1.03 | Front-end Loader Operator |
| 2013-07-18 | TC @ 160 | 163 | 160 | 1.02 | Truck Driver |
| 2009-01-21 | TC @ 160 | 267 | 160 | 1.67 | Drill Operator, Rotary |
| 2009-01-21 | EC @ 160 | 207 | 160 | 1.29 | Drill Operator, Rotary |
| 2009-01-21 | TC @ 160 | 255 | 160 | 1.59 | Scaling (mechanical) |
| 2009-01-21 | EC @ 160 | 216 | 160 | 1.35 | Scaling (mechanical) |
| 2009-01-07 | TC @ 160 | 307 | 160 | 1.92 | Drill Operator, Jumbo Perc. |
| 2009-01-07 | EC @ 160 | 239 | 160 | 1.49 | Drill Operator, Jumbo Perc. |
| 2009-01-07 | TC @ 160 | 245 | 160 | 1.53 | Blaster, Powder Gang |
| 2009-01-07 | EC @ 160 | 175 | 160 | 1.09 | Blaster, Powder Gang |
| 2009-01-07 | TC from EC @ 160 | 201 | 160 | 1.26 | Blaster, Powder Gang |
| 2008-08-27 | TC @ 160 | 251 | 160 | 1.57 | Blaster, Powder Gang |
| 2008-08-27 | TC @ 160 | 246 | 160 | 1.54 | Drill Operator, Rotary |
| 2008-08-27 | TC from EC @ 160 | 213 | 160 | 1.33 | Blaster, Powder Gang |
| 2008-08-27 | EC @ 160 | 185 | 160 | 1.16 | Drill Operator, Rotary |
| 2008-08-27 | EC @ 160 | 170 | 160 | 1.06 | Blaster, Powder Gang |
| 2003-11-05 | Total Carbon,calculated from elemental carbon. | 443.83 | 400 | 1.11 | Drill Operator, Rotary Air |
| 2003-11-05 | Total Carbon,calculated from elemental carbon. | 444 | 400 | 1.11 | Drill Operator, Rotary Air |
| 2003-11-05 | Total Carbon,TC | 415 | 400 | 1.04 | Drill Operator, Rotary Air |
| 2002-11-05 | Total Carbon,TC | 1368.67 | 400 | 3.42 | Front-end Loader Operator |
| 2021-11-03 | TC @ 160 | 38 | 160 | 0.24 | Complete Load-Haul-Dump |
| 2021-11-03 | TC from EC @ 160 | 0 | 160 | 0.00 | Complete Load-Haul-Dump |
| 2021-11-03 | EC @ 160 | 30 | 160 | 0.19 | Complete Load-Haul-Dump |
| 2021-11-03 | EC @ 160 | 0 | 160 | 0.00 | Complete Load-Haul-Dump |
| 2021-11-03 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2021-11-03 | TC from EC @ 160 | 0 | 160 | 0.00 | Complete Load-Haul-Dump |
| 2021-11-03 | Quartz, respirable, >1% Qtz | 0.57 | Drill Operator, Rotary | ||
| 2021-11-03 | ORGANIC CARBON | 0 | Complete Load-Haul-Dump | ||
| 2021-11-03 | ORGANIC CARBON | 0 | Complete Load-Haul-Dump | ||
| 2021-11-03 | TC @ 160 | 0 | 160 | 0.00 | Complete Load-Haul-Dump |
| 2020-08-12 | TC from EC @ 160 | 0 | 160 | 0.00 | Truck Driver |
| 2020-08-12 | TC @ 160 | 0 | 160 | 0.00 | Truck Driver |
| 2020-08-12 | EC @ 160 | 0 | 160 | 0.00 | Truck Driver |
| 2018-10-15 | TC from EC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
| 2018-10-15 | EC @ 160 | 109 | 160 | 0.68 | Scaling (mechanical) |
| 2018-10-15 | EC @ 160 | 39 | 160 | 0.24 | Truck Driver |
| 2018-10-15 | TC @ 160 | 0 | 160 | 0.00 | Front-end Loader Operator |
| 2018-10-15 | TC from EC @ 160 | 0 | 160 | 0.00 | Truck Driver |
| 2018-10-15 | TC @ 160 | 152 | 160 | 0.95 | Scaling (mechanical) |
| 2018-10-15 | TC @ 160 | 51 | 160 | 0.32 | Truck Driver |
| 2018-10-15 | TC from EC @ 160 | 0 | 160 | 0.00 | Front-end Loader Operator |
| 2018-10-15 | EC @ 160 | 13 | 160 | 0.08 | Front-end Loader Operator |
| 2018-08-15 | EC @ 160 | 54 | 160 | 0.34 | Drill Operator, Jumbo Perc. |
| 2018-08-15 | TC @ 160 | 75 | 160 | 0.47 | Drill Operator, Jumbo Perc. |
| 2018-08-15 | TC from EC @ 160 | 0 | 160 | 0.00 | Drill Operator, Jumbo Perc. |
| 2018-08-15 | TC from EC @ 160 | 0 | 160 | 0.00 | Front-end Loader Operator |
| 2018-08-15 | TC from EC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
| 2018-08-15 | EC @ 160 | 56 | 160 | 0.35 | Scaling (mechanical) |
| 2018-08-15 | TC @ 160 | 87 | 160 | 0.54 | Scaling (mechanical) |
| 2018-08-15 | EC @ 160 | 37 | 160 | 0.23 | Front-end Loader Operator |
| 2018-08-15 | TC @ 160 | 51 | 160 | 0.32 | Front-end Loader Operator |
| 2018-04-05 | TC from EC @ 160 | 0 | 160 | 0.00 | Scraper Operator |
| 2018-04-05 | TC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
| 2018-04-05 | EC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
| 2018-04-05 | EC @ 160 | 28 | 160 | 0.18 | Scraper Operator |
| 2018-04-05 | TC @ 160 | 37 | 160 | 0.23 | Scraper Operator |
| 2018-04-05 | TC from EC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
| 2017-05-23 | Respirable dust, <.1mg | 0 | Ball Mill Operator | ||
| 2017-05-23 | Nuisance dust, respirable, <1% Qtz | 0.34 | 10 | 0.03 | Front-end Loader Operator |
| 2017-01-24 | TC @ 160 | 145 | 160 | 0.91 | Scaling (mechanical) |
| 2017-01-24 | EC @ 160 | 127 | 160 | 0.79 | Scaling (mechanical) |
| 2017-01-24 | TC from EC @ 160 | 0 | 160 | 0.00 | Scaling (mechanical) |
| 2017-01-24 | TC from EC @ 160 | 0 | 160 | 0.00 | Front-end Loader Operator |
| 2017-01-24 | TC @ 160 | 113 | 160 | 0.71 | Drill Operator, Rotary Air |
| 2017-01-24 | EC @ 160 | 140 | 160 | 0.88 | Front-end Loader Operator |
| 2017-01-24 | TC from EC @ 160 | 0 | 160 | 0.00 | Drill Operator, Rotary Air |
| 2017-01-24 | EC @ 160 | 101 | 160 | 0.63 | Drill Operator, Rotary Air |
| 2016-08-11 | EC @ 160 | 23 | 160 | 0.14 | Front-end Loader Operator |
| 2016-08-11 | TC @ 160 | 32 | 160 | 0.20 | Front-end Loader Operator |
| 2016-08-11 | TC @ 160 | 25 | 160 | 0.16 | Truck Driver |
| 2016-08-11 | TC from EC @ 160 | 0 | 160 | 0.00 | Truck Driver |
| 2016-08-11 | EC @ 160 | 5 | 160 | 0.03 | Truck Driver |
| 2016-08-11 | EC @ 160 | 2 | 160 | 0.01 | Screen/Scalper Operator |
| 2016-08-11 | TC @ 160 | 2 | 160 | 0.01 | Screen/Scalper Operator |
| 2016-08-11 | TC from EC @ 160 | 0 | 160 | 0.00 | Screen/Scalper Operator |
| 2016-08-11 | TC from EC @ 160 | 0 | 160 | 0.00 | Front-end Loader Operator |
| 2016-03-02 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2016-03-02 | Nuisance dust, respirable, <1% Qtz | 0.21 | 10 | 0.02 | Ball Mill Operator |
| 2016-03-02 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2016-03-02 | Nuisance dust, respirable, <1% Qtz | 0.24 | 10 | 0.02 | Mechanic |
| 2016-03-02 | Quartz, respirable, >1% Qtz | 0.55 | 3.22 | 0.17 | Mucking Mach. Operator |
| 2016-03-02 | Nuisance dust, respirable, <1% Qtz | 0.29 | 10 | 0.03 | Crusher Oper/Worker |
| 2014-11-05 | TC from EC @ 160 | 0 | 160 | 0.00 | Truck Driver |
| 2014-11-05 | EC @ 160 | 20 | 160 | 0.13 | Truck Driver |
| 2014-11-05 | Nuisance dust, respirable, <1% Qtz | 0.53 | 10 | 0.05 | Mechanic |
| 2014-11-05 | Nuisance dust, total, <1% Qtz | 3.06 | 10 | 0.31 | Crusher Oper/Worker |
| 2014-11-05 | TC from EC @ 160 | 0 | 160 | 0.00 | Truck Driver |
| 2014-11-05 | EC @ 160 | 11 | 160 | 0.07 | Truck Driver |
| 2014-11-05 | TC from EC @ 160 | 0 | 160 | 0.00 | Front-end Loader Operator |
| 2014-11-05 | EC @ 160 | 26 | 160 | 0.16 | Front-end Loader Operator |
| 2014-11-05 | TC @ 160 | 18 | 160 | 0.11 | Truck Driver |
| 2014-11-05 | Nuisance dust, respirable, <1% Qtz | 0.13 | 10 | 0.01 | Front-end Loader Operator |
| 2014-11-05 | TC @ 160 | 44 | 160 | 0.28 | Front-end Loader Operator |
| 2014-11-05 | TC @ 160 | 22 | 160 | 0.14 | Truck Driver |
| 2014-03-05 | EC @ 160 | 13 | 160 | 0.08 | Drill Operator, Rotary Air |
| 2014-03-05 | TC @ 160 | 30 | 160 | 0.19 | Drill Operator, Rotary Air |
| 2014-03-05 | EC @ 160 | 8 | 160 | 0.05 | Front-end Loader Operator |
| 2014-03-05 | TC @ 160 | 20 | 160 | 0.13 | Front-end Loader Operator |
| 2014-03-05 | TC from EC @ 160 | 0 | 160 | 0.00 | Drill Operator, Rotary Air |
| 2014-03-05 | TC from EC @ 160 | 0 | 160 | 0.00 | Truck Driver |
Muestras de área (aire de molino y taller)
Última medición: 2021-11-03, hace 4 añosVer los análisis individuales (8)
| Fecha | Contaminante | Concentración | Límite | Conc / límite | Área muestreada |
|---|---|---|---|---|---|
| 2021-11-03 | TC from EC @ 160 | 0 | UG SHAFT/STATION | ||
| 2021-11-03 | EC @ 160 | 0 | UG SHAFT/STATION | ||
| 2009-01-07 | EC @ 160 | 162 | UG Active Mining AR | ||
| 2009-01-07 | TC from EC @ 160 | 0 | UG Active Mining AR | ||
| 2009-01-07 | TC @ 160 | 185 | UG Active Mining AR | ||
| 2008-08-27 | EC @ 160 | 233 | UG ACTIVE MINING | ||
| 2008-08-27 | TC @ 160 | 290 | UG ACTIVE MINING | ||
| 2008-08-27 | TC from EC @ 160 | 0 | UG ACTIVE MINING |
Imerys Ellijay Marble Hill Mine registró 0.00 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2018.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.| Año | tasa de casos totales | días perdidos | mortales |
|---|---|---|---|
| 2018 * | 0.00 | 0.00 | 0.000 |
| 2017 * | 6.34 | 0.00 | 0.000 |
| 2016 * | 0.00 | 0.00 | 0.000 |
| 2015 * | 0.00 | 0.00 | 0.000 |
| 2014 * | 2.96 | 2.96 | 0.000 |
| 2013 * | 0.00 | 0.00 | 0.000 |
| 2012 * | 2.92 | 0.00 | 0.000 |
| 2011 * | 2.13 | 0.00 | 0.000 |
- Boundary Creek Mining 1989 a 1990
- Filler Products Inc 1990 a 1998
- O-N Minerals (Filler Products) Company 1998 a 2008
- Carmeuse L&S 2009 a 2023
- Imerys Carbonates USA, INC 2023 al presente
| Año | Empleados |
|---|---|
| 2023 | 12 |
| 2022 | 18 |
| 2021 | 13 |
| 2020 | 19 |
| 2019 | 10 |
| 2018 | 34 |
| 2017 | 37 |
| 2016 | 37 |
| 2015 | 37 |
| 2014 | 36 |
| 2013 | 36 |
| 2012 | 39 |
| 2011 | 45 |
| 2010 | 45 |
| 2009 | 40 |
| 2008 | 37 |
| 2007 | 41 |
| 2006 | 38 |
| 2005 | 33 |
| 2004 | 34 |
| 2003 | 34 |
| 2002 | 35 |
| 2001 | 37 |
| 2000 | 33 |
Imerys Ellijay Marble Hill Mine se ubica en Gilmer County, Georgia, donde la categoría minera del Censo representa el 0.2% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2023 Q4 | 0 | 0 | 0 | |
| 2023 Q2 | 4,508 | 0 | 0 | 0.0 |
| 2023 Q1 | 5,838 | 0 | 0 | 0.0 |
| 2022 Q4 | 4,975 | 4 | 1 | 804.0 |
| 2022 Q3 | 6,142 | 2 | 0 | 325.6 |
| 2022 Q2 | 1,534 | 19 | 1 | 12385.9 |
| 2022 Q1 | 2,011 | 2 | 0 | 994.5 |
| 2021 Q4 | 4,634 | 3 | 1 | 647.4 |
Mostrar 87 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2021 Q3 | 574 | 0 | 0 | 0.0 |
| 2021 Q2 | 0 | 0 | 0 | |
| 2021 Q1 | 4,576 | 0 | 0 | 0.0 |
| 2020 Q4 | 4,229 | 10 | 0 | 2364.6 |
| 2020 Q3 | 3,379 | 8 | 2 | 2367.6 |
| 2020 Q2 | 2,701 | 1 | 0 | 370.2 |
| 2020 Q1 | 5,740 | 1 | 0 | 174.2 |
| 2019 Q4 | 2,376 | 1 | 0 | 420.9 |
| 2019 Q3 | 0 | 0 | 0 | |
| 2019 Q2 | 0 | 0 | 0 | |
| 2019 Q1 | 3,239 | 1 | 0 | 308.7 |
| 2018 Q4 | 11,511 | 4 | 1 | 347.5 |
| 2018 Q3 | 15,919 | 2 | 0 | 125.6 |
| 2018 Q2 | 15,360 | 3 | 0 | 195.3 |
| 2018 Q1 | 18,001 | 1 | 0 | 55.6 |
| 2017 Q4 | 16,586 | 2 | 0 | 120.6 |
| 2017 Q3 | 16,282 | 5 | 0 | 307.1 |
| 2017 Q2 | 14,440 | 1 | 0 | 69.3 |
| 2017 Q1 | 15,790 | 2 | 0 | 126.7 |
| 2016 Q4 | 16,171 | 0 | 0 | 0.0 |
| 2016 Q3 | 18,423 | 1 | 0 | 54.3 |
| 2016 Q2 | 18,084 | 2 | 0 | 110.6 |
| 2016 Q1 | 19,226 | 1 | 0 | 52.0 |
| 2015 Q4 | 19,725 | 2 | 1 | 101.4 |
| 2015 Q3 | 18,255 | 0 | 0 | 0.0 |
| 2015 Q2 | 10,762 | 1 | 0 | 92.9 |
| 2015 Q1 | 18,970 | 3 | 1 | 158.1 |
| 2014 Q4 | 17,584 | 4 | 0 | 227.5 |
| 2014 Q3 | 17,652 | 2 | 0 | 113.3 |
| 2014 Q2 | 17,197 | 2 | 0 | 116.3 |
| 2014 Q1 | 15,025 | 1 | 0 | 66.6 |
| 2013 Q4 | 14,488 | 1 | 0 | 69.0 |
| 2013 Q3 | 15,464 | 0 | 0 | 0.0 |
| 2013 Q2 | 15,489 | 1 | 0 | 64.6 |
| 2013 Q1 | 17,065 | 3 | 0 | 175.8 |
| 2012 Q4 | 15,872 | 1 | 0 | 63.0 |
| 2012 Q3 | 17,584 | 3 | 0 | 170.6 |
| 2012 Q2 | 18,005 | 1 | 0 | 55.5 |
| 2012 Q1 | 16,944 | 2 | 0 | 118.0 |
| 2011 Q4 | 20,045 | 6 | 0 | 299.3 |
| 2011 Q3 | 24,370 | 2 | 0 | 82.1 |
| 2011 Q2 | 24,792 | 1 | 0 | 40.3 |
| 2011 Q1 | 24,838 | 2 | 1 | 80.5 |
| 2010 Q4 | 21,607 | 3 | 1 | 138.8 |
| 2010 Q3 | 27,314 | 4 | 0 | 146.4 |
| 2010 Q2 | 23,872 | 3 | 1 | 125.7 |
| 2010 Q1 | 19,557 | 3 | 2 | 153.4 |
| 2009 Q4 | 21,880 | 5 | 1 | 228.5 |
| 2009 Q3 | 22,407 | 9 | 4 | 401.7 |
| 2009 Q2 | 22,033 | 11 | 5 | 499.3 |
| 2009 Q1 | 20,861 | 16 | 6 | 767.0 |
| 2008 Q4 | 19,816 | 22 | 9 | 1110.2 |
| 2008 Q3 | 22,598 | 2 | 0 | 88.5 |
| 2008 Q2 | 24,475 | 1 | 0 | 40.9 |
| 2008 Q1 | 24,186 | 3 | 1 | 124.0 |
| 2007 Q4 | 24,489 | 2 | 0 | 81.7 |
| 2007 Q3 | 26,232 | 4 | 0 | 152.5 |
| 2007 Q2 | 27,044 | 1 | 1 | 37.0 |
| 2007 Q1 | 26,936 | 1 | 0 | 37.1 |
| 2006 Q4 | 25,631 | 3 | 0 | 117.0 |
| 2006 Q3 | 27,173 | 1 | 0 | 36.8 |
| 2006 Q2 | 13,067 | 1 | 0 | 76.5 |
| 2006 Q1 | 21,642 | 0 | 0 | 0.0 |
| 2005 Q4 | 20,430 | 1 | 0 | 48.9 |
| 2005 Q3 | 22,139 | 0 | 0 | 0.0 |
| 2005 Q2 | 19,612 | 0 | 0 | 0.0 |
| 2005 Q1 | 20,644 | 0 | 0 | 0.0 |
| 2004 Q4 | 22,298 | 0 | 0 | 0.0 |
| 2004 Q3 | 23,377 | 0 | 0 | 0.0 |
| 2004 Q2 | 24,280 | 0 | 0 | 0.0 |
| 2004 Q1 | 22,191 | 0 | 0 | 0.0 |
| 2003 Q4 | 23,287 | 1 | 1 | 42.9 |
| 2003 Q3 | 20,610 | 0 | 0 | 0.0 |
| 2003 Q2 | 20,489 | 1 | 0 | 48.8 |
| 2003 Q1 | 20,059 | 4 | 3 | 199.4 |
| 2002 Q4 | 19,221 | 5 | 3 | 260.1 |
| 2002 Q3 | 20,765 | 0 | 0 | 0.0 |
| 2002 Q2 | 16,009 | 1 | 0 | 62.5 |
| 2002 Q1 | 14,439 | 0 | 0 | 0.0 |
| 2001 Q4 | 16,999 | 0 | 0 | 0.0 |
| 2001 Q3 | 20,332 | 0 | 0 | 0.0 |
| 2001 Q2 | 20,101 | 0 | 0 | 0.0 |
| 2001 Q1 | 20,232 | 0 | 0 | 0.0 |
| 2000 Q4 | 19,618 | 5 | 1 | 254.9 |
| 2000 Q3 | 17,548 | 1 | 0 | 57.0 |
| 2000 Q2 | 15,653 | 4 | 2 | 255.5 |
| 2000 Q1 | 17,572 | 2 | 0 | 113.8 |
Muertes en esta mina
1 registradasIncidentes reportables
21 en archivo (excluyendo las muertes anteriores)2017 · 3 incidentes
Temporary employee was cutting the ANFO hose on the powder truck. The knife slipped cutting the employee's arm. The employee was taken to the emergency room where the employee received 11 staples. The knife was being pulled toward employee's body instead of away.
Two employees were loading 10' lengths of stainless steel shaft from a vertical turbine pump into a loader bucket. They were performing two man lifts. At some point IE started lifting them alone and back popped and felt a pain in lower back. IE finished loading the shafts and then came to the surface and told the shift foreman what happened.
The injured and another contractor employee were in the process of reassembling the front end of a haul truck. The injured contractor employee was crawling under the haul truck when ee placed finger in a pinch point. The other employee slid the front end assembly into place while the injured' s finger was in a the pinch point, resulting in an avulsion of a finger.
2014 · 1 incidente
EE was loading 50lb. prell bags from a tractor trailer onto the powder truck in preparation for loading headings. When he lifted one of the bags he stated that he felt pain in his lower back. EE was diagnosed with a strained back and did not work March 25, 26, & 27.
2012 · 1 incidente
Employee was working with the plant mechanic and was repairing a conveyor belt at the crusher. The employee was making a straight cut of the 30 inch belt when the razor knife slipped and cut his leg slightly above the left knee. Later that evening, the employee, called the supervisor and said that he wanted to go to the ER because of the pain in his leg. He received two stitches.
2011 · 1 incidente
Employee breathed in smoke while evacuating the mine during a fire on a haul truck. He was sent to the hospital for evaluation as a precaution. He was released to light duty one day then released back to full duty. EE operating haul truck, heard pop, stopped truck and opened door and saw flames out the door. Accident is still under investigation to determine cause of the fire.
2010 · 1 incidente
Employee had removed a plate from the chip chute and was clearing the build-up from the chute when his jacket became entangled in a rotating shaft. He did NOT get pulled into the shaft. His injury was caused from the tearing of the jacket.
2008 · 2 incidentes
Injured Employee was part of a scaling crew. He was pointing out a loose rock on the opposite rib when a rock fell from the roof striking him on the left shoulder. Injuries are fractured left clavicle and 3 compressed lumbar vetibrae.Employee should have not been standing in the immediate area of the scaling.
Employee was scaling in Level 9 North 7 when a large rock fell from the roof and landed on the boom of the Getman Scaler. His right arm hit the side of the machine. He was taken to the ER and x-rays were taken. He was released back to work with no restrictions. Report was bruised forearm.
2004 · 1 incidente
Employee was using a frontend loader to clean up an area on level 8, when he parked his loader to get out and look the area over he stepped on a rock on turned his ankle. Agrivating an old injury. He did not miss time until 10/20/2004. On the 20th he called and said he would not be able to work due to his injury. He has an appointment 10/29/2004 with a doctor.
2002 · 1 incidente
EE HAD CLOCKED OUT AT 1600 AT THE END OF HIS SHIFT. HE WAS LEAVING THE PROPERTY WHEN HE RAN INTO AN OPENED GATE. THE GATE WAS CHAINED IN THE OPEN POSITION AT THE EDGE OF THE ROAD. THE END OF T HE GATE BEING ON THE EDGE OF THE ROAD AND THE RATE OF SPEED PLUS THE DISTRACTION OF PASSING THE OVER THE ROAD ROCK TRUCK WERE THE CONTRIBUTING CONDITIONS. THE GATE WAS CHAINED IN THE OPEN POS
2001 · 1 incidente
MINER WAS HAULING MUCK FROM THE MINE TO THE SURFACE. STEERING CYLINDER SUPPORT BROKE & BUSTED THE TRANSMISSION HOUSING & RIPPED OUT THE BRAKE LINES. THE EQUIPMENT ROLLED BACKWARDS ABOUT 60-75' STRIKING THE WALL. THE SUDDEN STOP GAVE THE EE WHIPLASH. DOCTORS RELEASED HIM TO FULL DUTY. HOWEVER HE STATES HE IS HAVING HEADACHES & CANNOT RETURN TO WORK.
1998 · 1 incidente
WHILE SETTING UP THE POWDER WAGON, OTHER INADVERTENTLY LOWERED THE RIGHT SIDE OUTRIGGER DOWN ON EE'S RIGHT FOOT. HE RECEIVED A FRACTURED FOOT AND AN OPEN LACERATION TO THE TOP OF HIS FOOT.
1997 · 1 incidente
DRILLER WAS ATTEMPTING TO PLUG A 2" DRILL HOLE WHICH HAD EVIDENTLY BEEN DRILLED INTO A CAVITY AND WAS SPRAYING WATER. AFTER SEVERAL UNSUCCESSFUL ATTEMPTS TO PLUG THE 2" HOLE, IT WAS DECIDED TO REMOVE THE DRILL AND SET UP A PUMP WHICH WOULD ALLOW TIME TO PROPERLY PLUG THE HOLE. THE WATER WAS ONLY COMING OUT OF THE 2" HOLE THE LAST TIME ANYONE SAW THE FACE. HOWEVER SEVERAL HOURS LATE
1996 · 1 incidente
A ROCK WEIGHING APPRXO 30 LBS FELL FROM ABOUT 50' FROM THE ROOF HITTING ON WINDSHIELD AND EDGE OF THE CAB. THE ROCK PENETRATED THE WINDSHIELD STRIKING THE VICTIM ON BOTH HANDS. THE VICTIM RE CEIVED A LACERATION TO THE LEFT HAND REQUIRING 2 STITCHES AND CHIPPING THE BONE IN THE MIDDLE FINGER ALSO REQUIRING THREE STTICHES.
1995 · 1 incidente
EMPLOYEE CUT LEFT INDEX FINGER & HAND WHILE CUTTING PACKAGING BOX OPEN WITH POCKET KNIFE KNIFE SLIPPED & CUT HAND
1994 · 1 incidente
EMPLOYEE OPENED STORAGE TRAILER LATCH, THE DOOR HAD PRESSURE ON IT FROM LOAD SHIFT AND THE LATCH SPRUNG OUTWARD STRIKING EMPLOYEE ON THE RIGHT SIDE OF THE FOREHEAD.
1991 · 2 incidentes
EMPLOYEE WAS LOADING TRUCKS WITH 988 CAT LOADER. SAID HE HAD SHARP PAIN IN HIS BACK AND PAIN GOT WORSE. EMPLOYEE HAD TO GO HOME AND I SCHEDULED AN APPOINTMENT WITH DOCTOR FOR HIM. EMPLOYEE WAS DOING NO PHYSICAL LIFTING. EMPLOYEE PREVIOUSLY HAD SAME PROBLEM ON 7-29-91.
EMPLOYEE WAS LOADING TRUCKS WITH CAT LOADER, BEGAN COMPLAINING OF BACK HURTING. WAS NOT LIFTING ANYTHING HEAVY OR DOING ANY MANUAL LABOR. OPERATION OF LOADER WAS ON SMOOTH, LEVEL GROUND.
1990 · 2 incidentes
VICTIM WAS SCALING DOWN THE BACK WHEN A ROCK TRAVELED DOWN THE SCALING POLE STRIKING THE VICTIM ON THE ARM. THUS REQUIRING 4 SUTURES IN THE LEFT ARM.
LOADING TOP ROW ROCK FELL ON BUCKET LANDED ON R FOOT, CRUSHING LITTLE TOE AND LACER IT WAS REMOVED BY SURGEON AT MED CENTER