Avísenme cuando se presente un nuevo incidente de la MSHA en Portable Crushing Dept 420.
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2025 Q4 | 4,180 | 0 | 0 | 0.0 |
| 2025 Q3 | 4,649 | 0 | 0 | 0.0 |
| 2025 Q2 | 4,131 | 0 | 0 | 0.0 |
| 2025 Q1 | 753 | 1 | 0 | 1328.0 |
| 2024 Q4 | 2,496 | 0 | 0 | 0.0 |
| 2024 Q3 | 4,150 | 1 | 0 | 241.0 |
| 2023 Q4 | 4,411 | 1 | 0 | 226.7 |
| 2022 Q4 | 3,155 | 0 | 0 | 0.0 |
Employee was stemming a blast hole. When they were finished they were using their foot to level it off when their knee gave out.
Miner was coming down the surge bin ladder and fell landing on the ground.
EE was using a scrapper to remove material from the side of the surge bin. EE's right hand came into contact with the roller guard during this process resulting in a broken right pinkie finger.
This incident became reportable when the miner finally agreed to go to the doctor and an MRI revealed a torn meniscus on 7-18-22. On the date of the incident the miner said miner was fine and no medical care was needed. On May 12th the miner slipped on the bumper of miner's stockpile truck when shutting the hood during pre-operation inspection.
THE MINER GOT CAUGHT IN THE ROLLER OF THE TAIL PULLEY ON THE OVERHEAD CONVEYOR ON THE SCREEN BELT. LEFT WRIST AND FOREARM HAVE BROKEN BONES. RIGHT ARM HAS CUTS AND FRICTION BURNS. THE TIP OF RIGHT INDEX FINGER WAS CUT OFF AT THE FIRST KNUCKLE AND THE FINGER WAS SKINNED.
OPERATING SKID LOADER WHEN THE WIND PICKED UP AND BLEW A PARTICLE INTO MINER'S RIGHT EYE.
REPLACING IMPACT HAMMERS. NUT WAS STUCK IN SOCKET. MINER PUT BOLT BACK IN THE NUT AND WAS HITTING THE NUT WHEN THE SOCKET SLIPPED AND HIT MINER'S LEFT INDEX FINGER.
Doing Maintenance changing screens and tweaked back
Truck Driver for Manatts suffered a heart attack while on property
Plant man was working on the piggy back conveyor for the surge bin, he had the guard propped up, a gust of wind came knocking the guard down hitting him on the helmet and causing a laceration in his forehead.
Employee was changing a screen on a screen plant and the wrench he was using slipped off the nut causing him to bump his elbow.
Hearing loss due to plant and equipment operations.
CHANGING HAMMERS IN THE IMPACT. NEXT MORNING WOKE WITH MUSCLE SPASMS IN BACK. DR SENT HIM TO PHYSICAL THERAPY
Using a pry bar to lock router to turn hammers on mill. Missed hole on spinner with pry bar and pry bar hit hand.
EE was checking to see if a wire was loose on the fan in the air conditioning unit in his loader. EE did not turn the motor off on the loader and stuck his fingers too far into the unit. EE had partial amputation of the very tip of middle finger on right hand requiring two stitches.
EE WAS STANDING ON A LADDER ATTACHED TO THE PRIMARY CRUSHER HOPPER, GUIDING A LOADER INT HE ATTEMPT TO CLEAR A JAMMED BOULDER. IN THE ATTEMPT, THE ROCKS SHIFTED IN AN UNATICIPATED MANNER, CAUS ING ONE ROCK TO SPIN AROUND AND STRIKE HIS RIGHTHAND WHICH WAS GRIPPING THE TOP EDGE OF THE HOPPER. INJURIED RIGHT MIDDLE FINGER, LACERATIONS OF SKIN, LACERATION OF EXTENSOR TENDON, OPEN FRAC