No 22 Mine Coal

AN AREA OF ROOF FELL IN #5 ENTRY APPROX. 8 BREAKS FROM THE FACE. THE FALL MEASURED 30' X 40' X 6' HIGH. IT FELL BECAUSE ON AN UNDETECTED FAULT IN THIS AREA WHICH WAS BOLTED WITH 4' BOLTS.

AS HE WAS MOVING A PIECE OF ROCK, HE CUT HIS ARM ON THE ROCK.

AS HE WAS CUTTING AND WELDING HE WAS STRUCK IN THE EYE BY A PIECE OF WELDING SLAG.

APPROX. 30' LONG BY 18' WIDE X 8' THICK. AREA OF ROCK FELL IN #3 ENTRY. THIS AREA WAS 2 BREAKS OUTBY THE FACE IN AN INTERSECTION. A FAULT AREA FELL AFTER WORKING FOR SOME TIME.

ON THE MAINLINE BELT 2 BREAKS INBY SPAD #6484 A ROOF FALL OCCURRED WHICH MEASURED APPROX. 40' X 35' X 5' THICK. THIS FALL OCCURRED BECAUSE OF A FAULT IN THE ROOF. THE ROCK FELL ON BELT STRUCTU RE.

I.NAME SLIPPED & FELL AT 001 HEADDRIVE TRACK SWITCH.TWISTED KNEE.

AS HE WAS ROCKDUTING, HE STATED HE TURNED ON HIS KNEE. HE SAID HE STRAINED HIS KNEE.

AS HE WAS SITTING ON THE SCOOP A PIECE OF ROCK APPROX. 4FTX2FTX2INCH THICK FELL BETWEEN THE BOLTS AND STRUCK HIM IN THE LOWER BACK.

OPERATING OUTBY BRIDGE CARRIER.I.NAME CAUGHT LEG BETWEEB COAL RIB AND CARRIER.

AS EE WAS PULLING ON A ROPE ATTACHED TO A BUNDLE OF 3 INCH PLASTIC WATERLINE HE FELL DOWN WHEN HE PUT HIS ARM OUT TO BREAK THE FALL HE BROKE HIS WRIST.

A WIRE FENCE GUARD INSTALLED AROUND THE SECTION BELT DRIVE BECAME ENTANGLED IN HEAD ROLLER WHILE THE DRIVE WAS RUNNING.THIS GUARD WRAPPED AROUND INJ RIGHT ARM FRACTURING IT.

A FAULT IN THE ROOF CAUSED THE ROOF THE FALL 3 BREAKS FROM THE FACE 5' THICK X 30' LONG BY 20' WIDE INT HE BELT ENTRY. THIS ROCK FELL ONTHE MOBLE BRIDGE CARRIER.

INJURED STATED THAT HIS BACK STARTED HURTING BECAUSE OF PICKING UP MATERIAL WELDER WHILE WORKING UNDERGROUND.

AS HE WAS PULLING ON A TRAILING CABLE, A PIECE OF ROOF MATERIAL FELL ON HIS LEFT LITTLE FINGER.

WHEN HE WAS ATTEMPTING TO MOVE LOW LOW SOLID BELT STRUCTURE WITH HIS SCOOP HE CAUGHT HIS EAR ON A ROOF BOLT.THIS RESULTED IN A CUT EAR.

AS HE WAS BOLTING HIS ARM BRUSHED AGAINST THE DRILL ROTATION HYDRAULIC HOSE.THIS ARM WAS PUNCTURED BY A SMALL WIRE PROTRUDING FROM A FRAYED HYDRAULIC HOSE.

HE STATED HE HURT HIS BACK WHEN HE MOVED A ROCK OFF OF THE 3#5 HEADDRIVE

AS HE WAS HELPING REPLACE A BELT TAKE-UP ROLLER, THE ROLLER FELL ON HIS FOOT.

MINER TAKING LAST CUT ON PILLAR LINE,LARGE PILLAR FALL FELL ON JOY MINER COVERING IT COMPLETELY.

AS CUT 17 WAS BEING TAKEN ON THE PILLAR EXTRACTION PLAN A ROCK APPROX. 5FT BY 15FTX 15FT FELL ON THE MINER HEAD. THIS HEAVY MATERIAL ON THE HEAD CAUSING THE MINER NOT TO BE ABLE TO RETREAT UNT IL A RETRIEVER WAS ATTACHED TO IT.

AS THE CONTINUOUS MINER WAS CUTTING CUT #7 IN PILLARING WORK, A LARGE ROCK FELL ON TEH MINER CUTTING HEAD. WHEN THE MINER TRIED TO BACK OUT, THE MINER'S TRACK STARTED SPINNING IN SOFT BOTTOM. THE MINER WAS NOT ABLE TO TRAM OUT ON IT'S OWN POWER.

IN 3 ENTRY 2 CROSSCUTS FROM THE FACE A ROOF FALL OCCURRED MEASURING APPROX. 50 FT LONG BY 12 FT WIDE BY 4 FT HIGH. THE FALL OCCURRED BETWEEN TWO HILL SEAMS.

TRIMMING PC OF BELT WITH KNIFE PULLED KNIFE INTO LEG

A SECTION OF ROOF 18FT LONG X16FT WIDE BY 30IN THICK FELL IN 2ND RIGHT OFF THE MAINS IT IS LOCATED IN #3 ENTRY 4 BREAKS FROM MAINLINE TRACK IT RFELL BECAUSE OF COAL RIDER SEAM ABOVE FALL AREA

WHILE WORKING ON BOLT MACHINE HE CAUGHT LIGHT CORD ON RAISE LEVER FOR BOOM & CAUSED BOOM TO LOWER. FINGER WAS CAUGHT BETWEEN BOOM & FRAME.

AS HE WAS WALKING TOWARDS THE FACE BESIDE THE LOW LOW BELT CONVEYOR,INJURED STATES THAT HE TRUNED AROUND IN ORDER TO WALK IN THE OPPOSITE DIRECTION.AT THAT TIME HE SAYS HE FELL ON THE BELT CON VEYOR WHICH WAS MOVING.THIS SPRAINED HIS RIGHT KNEE.

AS HE WAS LOADING ROOF BOLT RESIN ONTO HIS BOLT MACHINE,INJURED STATES THAT HE FELT A SHARP PAIN IN HIS NECK AND SHOULDER.

DRAGGING 40 HP BRIDGE CARRIER PUMP MOTOR ACROSS BRIDGE CARRIER,STRAINED HIS BACK.STARTED MISSING TIME 6-1-90.

A LID CAME OFF AN SCSR STORAGE BOX WHILE HE WAS TRAMMING THE LOCOMOTIVE. THE LID STRUCK HIM ABOVE THE RIGHT EYE AND CUT HIS HEAD.

HE LIFTED A SCOOP PUMP MOTOR ON 4-10-90 AND FELT A PAIN IN HIS LOWER BACK. EE THOUGHT HIS BACK WOULD BE ALL RIGHT. ON 4-19-90 HE WENT TO DR AND STARTED MISSING TIME BECAUSE OF BACK STRAIN ON 4 -20-90.

I,NAME SAYS HE WAS REACHING FOR SCSR WHICH WAS IN THE LOCOMOTIVE, WHEN THE LOCOMOTIVE BEGAN TO MOVE, CAUSING A JERKING MOTION.

AS HE WAS RIDING A LOCOMOTIVE TOWARDS THE OUTSIDE, HIS HAT FELL OFF. AS HE PUT HIS HAND OUT TO STEADY HIS HAT HE STRUCK HIS RIGHT HAND ON A ROOF BOLT. THIS FRACTURED HIS RIGHT WRIST.

PUSHED GLUE INTO HOLE DRILLED IN ROOF,I.NAME FELT BURNING OR PAIN IN HIS LOWER BACK.THE STRETCHING AND PUSHING MOTION STRAINED HIS BACK.

WHILE LOADING A SCOOP BUCKET WITH ROCK DUST, HE STATES THAT HE THREW A 50 LB BAG OF ROCK DUST. AT THAT TIME HE SAYS HE FELT A BURNING IN HIS BACK.

WHILE OPERATING THE BRIDGE CARRIER, HE WAS STRUCK BY A PIECE OF ROCK. THIS ROCK HIT HIS HAND WHICH WAS GRIPPING THE TRAM LEVER. A BONE WAS BROKEN IN HIS RIGHT HAND.

THREW FULL CAN OF GEAR OIL ACROSS LOW STRUCTURE FELT PAIN IN LOWER BACK.

AS HE WAS PICKING UP A STEEL RAIL, HE DROPPED IT ON HIS FINGER. THIS BROKE HIS FINGER.

WHILE WORKING AT NO 2 HEAD DRIVE HE WAS STRUCK BY A SMALL PIECE OF ROCK ABOUT 4" BY 5" BY 1/4" THICK THIS LACERATED HIS R ARM

WHILE WATCHING THE MAIN LINE BELT RUN, HE LAID HIS HAND ON THE BELT TAKE UP DOLLY RAIL JACK. THE JACK SUDDENLY BROKE CAUSING HIS FINGER TO BE CUT.

AS HE WAS PUSHING A BOLT INTO A PREVIOUSLY DRILLED HOLE, HE PLACED HIS FINGER BETWEEN THE BOLT AND BOLT WRENCH. THIS ACTION CAUSED HIS FINGER TO BE LACERATED.

AS HE WSA RIDING IN THE BATTERY POWERED LOCAMOTIVE, HE RAISED HIMSELF UP TOO HIGH. AT THAT TIME HE CAUGHT HIS SHOULDER ON A ROOFBOLT. THIS BROKE HIS LEFT SHOUDLER.

WHILE HE WAS WALKING ALONG BELTLINE A PIECE OF ROCK FELL AND STRUCK HIM.

HE SAYS THAT HE HURT HIS BACK AS HE MOVED A TOOL BOX.

EMPLOYEE WAS SHOVELING 002 SECTION #2 TAILPIECE WHEN HE TURNED AROUND AND STRUCK HIS KNEE ON THE TURN BUCKLE.

EMPL WAS USING A PIECE OF BROKEN ROOF BOLTER DRILL STEEL AS A JACK HANDLE WHEN THE STEEL SLIPPED AND CUT HIS HAND

EMPLOYEE WAS HELPING MOVE LO-LO STRUCTURE AND CABLE WHEN HE STRAINED HIS ARM.

EMPLOYEE SLIPPED AND MANTRIP FRAME CUT HAND AND LEG.

EMPLOYEE STRUCK HIS HEAD AGAINST LOW TOP WHILE SUPPLYING 003 SECTION.

EMPL WAS STRUCK BY A KETTLE BOTOTM WHILE ROOFBOLTING THE KETTLE BOTTOM FELL FROM BETWEEN THE TEMPORARY SUPPORTS AND MEASURED APPROX 5'X 5'X 14" THICK

EMPL WAS STRUCK BY A KETTLE BOTTOM WHILE MOVING TEMPORARY SUPPORTS KETTLE BOTTOM MEASURED APPROX 5'X 5'X 14" THICK

EMPLOYEE WAS MINING THE LEFT BREAK OFF #3 ENTRY WHEN A SMALL PIECE OF ROCK 5IN WIDEX10INLONGX1/4IN THICK FELL & STRUCK EMPLOYEES HAND

EMPLOYEE ALLEDGES HE STRAINED HIS BACK WHILE CHANING A SPEED REDUCER ON A BRIDGE CARRIER.

EMPLOYEE WAS REMOVING CRIB BLOCKS FROM A MOVING BELTLINE WHEN HIS HAND WERE CAUGHT BETWEEN THE END OF THE BLOCK AND THE SPILLBOARD.

EMPLOYEE ALLEDGES HE HURT HIS BACK PULLING HEADDRIVE CABLE.

EMPL PITCHING CRIB BLOCKS ACROSS BRODGE WHEN FINGER WAS CAUGHT BETWEEN BLOCKS AND BRIDGE FRAME.

EMPLOYEE WAS STRUCK BY A PIECE OF DRAWROCK WHILE PREPARING TO BOLT A PREVIOUSLY MINED CHT THE ROCK APP 3FT X 4 FT X 1 INCH FELL FROM BETWEEN BOLTS AND CUT EMPLOYEE S LEFT SHOULDER.

EMPLOYEE WAS HELPING CHANGE THE CENTER DRUM ON A JOY 15CM CONTINUOUS MINER WHEN THE TOP HALF OF THE DRUM SLIPPED AND CAUGHT EMPLOYEE S FINGER BETWEEN THE DRUMS.

EMPLOYEE WAS ATTEMPTING TO LIFT A SPEED REDUCER INTO A SUPPLY CAR WHEN HIS BACK SUPPOSEDLY STARTED TO HURT.

AN UNINTENTIONAL ROOF FALL OCCURRED ON 004 SECTION IN THE RETURN AIRWAY APP. 10 BREAKS OUTBY THE SECTION. THE FALL MEASURED APP. 18'X20'X3' TO 4' AND WAS SUPPORTED WITH 36" RESIN RODS.

EMPLOYEE WAS BACKING THE BRIDGE CARRIER OUT OF THE RIGHT SIDE WHEN HE WAS CAUGHT BETWEEN THE TRAM SPEE REDUCER AND THE LEFT BELT LINE RIB.

EMPL HELPING MAKE BELT SET-UP WHEN FINGER WAS CAUGHT BETWEEN ROLL OFF BELT AND LOW STRUCTURE.

EMPLOYEE WAS LIFTING A METAL SPILL BOARD BACK IN PLACE WHEN HIS BACK STARTED TO HURT.

WHILE PILLARING OPERATIONS WERE BEING CONDUCTED ON 001 SECTION A PIECE OF ROCK FELL AND SEVERED THE REMOTE CONTROL CABLE OF THE CONTINUOUS MINING MACHINE WHICH KEPT THE MACHINE FROM TRAMMING. WHILE THE MACHINE WAS DISABLED THE FALL OF ROOF OCCURRED APP. 25' X 30' X 10' COVERING THE MINING MACHINE.

UNINTENTIONAL ROOF FALL OCCURRED 003 SECTION WHICH MEASURED 50'LONG X 20'WIDE X 1-6'.

EMPL WAS EXITING DECK OF SCOOP & AS HE PIVOTED ON HIS KNEE HE STATES HE FELT POP IN KNEE.

EMPLOYEE WAS USING A LIFTING JACK TO RAISE BATTERY ON SCOOP WHEN JACK CLOSED ON HIS FINGERS.

EMPLOYEE WAS CLEANING COAL OUT OF THE CABLE TRAY ON THE BRIDGE CARRIER WHEN A SLIVER OF METAL LODGED IN HIS HAND. EMPLOYEE DID NOT REPORT INJURY UNTIL 9-19-88.

EMPLOYEE WAS LOADING SUPPLIES INTO THE BUCKET OF AN S & S SCOOP WHEN HE ACCIDENT FELL STRIKING THE BUCKET OF THE SCOOP WITH HIS RIGHT SIDE.

EMPLOYEE WAS RIDING THE SCOOP MANTRIP WHEN HE WAS IN ADVERTANTLY THROWN INTO THE TOP . (THE SCOOP HAD TRAVELED OVER A ROUGH SECTION OF ROADWAY9.

004 SECTION HAS EXPERIENCED AN UNINTENTIONAL FALL OF ROOF MEASURING APPROX. 40' LONG, 20' WIDE AND 12' HIGH. FALL WAS APPROX. 320' INBY SPAD #9577 AND CONSISTED OF LAMINATED SHALE WITH A COAL RIDER APPROX. 5-7' ABOVE THE HAZARD #4 SEAM.

EMPLOYEE STATES HE HURT HIS BAKC LIFTING A HEADDRIVE CHAIN EMPLOYEE DID NOT REPORT INJURY TO COMPANY

EMPLOYEE WAS CUTTING THE LEFT CROSSCUT OFF #2 ENTRY WHEN A PIECE OF DRAWROCK FELL FROM BETWEEN TROOF BOLTS MEASURING APPROX. 21/2 X 3' X 11/2" AND STRUCK EMPLOYEE ON SHOULDER AND BACK

004 SECTION HAS EXPEREINCED AN UNITENTIONAL FALL OF ROOF APP. 2 BREAKS INBY SPAD #3752 ON INTAKE SIDE. THIS FALL WAS TO THE LEFT OF THE INTAKE ROADWAY AND WAS APP 7 BREADS WAY FROM THE LAST OPEN BREAK. FALL WAS APP. 19' WIDE, 4' THICK AND UNKNOWN LENGTH TO THE FACE OF CROSSCUT.

004 SECTION HAS EXPERIENCED AN UNINTENTIONAL FALL OF ROOF 5 BREAKS INBY SPAD #3752. FALL WAS APP. 4'X171/2'X20'. THIS FALL WAS TO THE LEFT OF THE INTAKE ROADWAY.

EMPLOYEE'S FOOT BECAME CAUGHT BETWEEN THE SCOOP FRAME AND THE REAR AXLE, WHICH HAD BEEN REMOVED AND TWISTED HIS KNEE TRYING TO REMOVE HIS FOOT.

EMPLOYEE WAS PULLING CABLE OFF ROOF BOLT MACHINE WHEN HIS BACK STARTED HURTING.

EMPLOYEE WAS LIFTING OXYGEN TANK INTO CARRIER WHEN HIS STOMACH STARTED HURTING HIM

EMPLOYEE FOOT WAS CAUGHT UNDER SCOOP BUCKET WHILE LOADING MANTRIP

EMPLOYEE STATES THAT HE REACHED FOR A TUBE OF RESIN TO INSTALL ROOF BOLTS WHEN HSI SHOULDER STARTED HURTING

EMPLOYEE WAS OPERATING CONTINUOUS MINER WHEN APICE OFD DRAW ROCK FELL FROM BETWEEN BOLTS AND STRUCK EMPLOYEE ON THE BACK.ROCK MEASURED APP. 3'X2'X1 1/2".

EMPLOYEE WAS ASSISTING IN THE ASSEMBLY OF A HEADDRIVE EXTENSION BOOM WHEN HE ATTEMPTED TO LIFT A TUBULAR SECTION OF STEEL.EMPLOYEE STATES THAT HIS BACK THEN BEGAN TO HURT. NOTE: EMPLOYEE DID NOT MISS ANY WORK UNTIL 05-04-88.

EMPLOYEE WAS TIGHTENING A 36IN.ROOF BOLT WHEN HIS COVERALL SLEEVE WAS CAUGHT BETWEEN THE ROTATING HEAD & THE BOLT WRENCH TWISTING HIS ARM

EMPLOYEE WAS TO BOLT THE TOP AFTER CONTINUOUS MINER CUTTING A BOOM FOR HEADDRIVE TO BE SET.HE WAS IN PREVIOUS BELT ENTRY APP 38' AWAY FROM MINER WHEN HE WAS STRUCK BY APIECE OF ROOF BOLT PLATE WHICH WAS BROKEN BY THE MINER BITS.

EMPLOYEE WAS STRUCK BY 3 IN WATER LINE FULL WHILE PULLING BELT THRU STRUCTURE WATER LINE WAS HUNG UP TO LET HEADDRIVE PASS UNDER WHEN ANOTHER EMPLOYEE STARTED TAKING WATER LINE DOWN THE REMAIN ING HANGERS BROKE LETTING THE WATER LINE FALL ON EMPLOYEE

EMPLOYEE WAS ADVANCING TEMPORARY SUPPORT WHEN A SECTION OF ROOF MEASURING APP. 3'X3'X3" THICK FELL AND STRUCK EMPLOYEES LEFT FOOT.EMPLOYEE WAS BOLTING FACE OF LEFT CROSSCUT.

004 SECTION EXPERIENCED UNINTENTIONAL FALL OF ROOF 9 BREAKS OUTBY FACE IN BELT ENTRY.FALL WAS APPROXIMATELY 40'X20'X6'.

EMPLOYEE WAS UNLOADING ROCKDUST AND CEMENT BLOCKS AT 003 AND 004 SECTIONS SUPPLY HOLE WHEN HIS BACK BEGAN TO HURT.

EMPLOYEE AND HELPER WERE LIFTING 4 FT X 8 FT X 3/8 IN SHEET OF METAL FOR SPILL BOARD CONTRUCTION WHEN HIS BACK STARTED HURTING HIM

EMPLOYEE WAS AD4USTING THE BOOM LIFT SCREW JACK FOR SECTION HEADDRIVE BY USE OF 8 LB. SLEDGE HAMMER WHEN HE INADVERTANTLY HIT JACK WITH HIS LEFT HAND.

MANTRIP BEING PULLED FROM 004 SECTION CUT OUT,DERAILED AND IN THE PROCESS OF PUTTING CAR ON TRACK EMPLOYEES LEFT AHND WAS CAUGHT BETWEEN THE CAR AND THE RAIL.

EMPLOYEE WAS CA6GHT BETWEEN THE LEFT RIB AND THE BRIDGE CARRIER. EMPLOYEE DE-ENERGIZED THE CARRIER BY USE OF THE PANIC BAR AND PREVENTED SERIOUR INJURY.

001 SECTION HAS3EXPERIENCED AN UNINTENTIONAL FALL OF ROOF INVOLVING THE ENTIRE SECTION EXCLUDING THE FIRST THREE BREAKS AND 3 PREVIOUSLY MINED PANELS EXACT EXTENT OF FALL IS UNDETERMINED AT TH IS TIME 3

EMPLOYEE WAS RE4OVING HEAD BOLTS FROM CONTINUOUS MINER WITH AN ADJUSTABLE WRENCH EXTENDING FROM A SOCKET AND RATCHET WHEN THE ADJUSTABLE SLIPPED CAUSING THE RATCHET HANDLE TO STRIKE EMPLOYEE'S CHIN. 3

EMPLOYEE WAS LO4ERING DRILL STEEL FROM A DRILLED HOLE WHEN HIS HAND WAS STRUCK BY THE STEEL. THE TOP SECTION OF THE STEEL WAS LODGED IN THE HOLE AND EMPLOYEE REACHED TO GET THE STEEL WHEN THE STEEL FELL FROM3THE HOLE.

EMPLOYEE WAS PU5LING AND LIFTING BELT TO MAKE A BLET SETUP WHEN HIS BACK STARTED HURTING.

EE WAS INSTALLI3G A 48" RESIN BOLT WHEN WRENCH BEING USED BENT & STRUCK EE'S LEFT HAND.

EMPLOYEE WAS TR5MMING THE BRIDGE CARRIER OUTBY THE LAST OPEN BREAK PREPARING TO GO TO THE LEFT SIDE, WHEN EMPLOYEE STARTED TO CHANGE DIRECTIONS HIS LEFT KNEE WAS CAUGHT BETWEEN THE STARTING BO X ON THE CARRIE9 AND THE RIB. EMPLOYEE THEN DE-ENERGIZED THE MINER BY REMOTE EMERGENCY STOP SWITCH LOCATED ON THE BRIDGE CARRIER.

A MANTRIP WAS B9ING PULLED FROM 001 SECTION TO THE OUTSIDE WHEN THEY ENCOUNTERED A SUPPLY TRIP BEING PUSHED INBY TO 004 SECTION.NEITHER TRIP COULS STOP AND A COLLISION OCCURRED.

EMPLOYEE WAS AT7EMPTING TO ALIGN LO-LO STRUCTURE WITHA METAL PRY BAR WHEN HIS FINGER BECAME CAUGHT BETWEEN THE LO-LO AND BAR.

EMPLOYEE WAS SC2OPING PUSH UP THAT HAD JUST BEEN CUT SO THE ROOF BOLTER COULD BOLT THE PLACE WHEN A ROCK MEASURING APP 2FTX3FTX11/2INCH FELL FROM BETWEEN BOLTS AND STRUCK EMPLOYEE ON HIS BACK AND SHOULDERS.3

EMPLOYEE WAS ST9UCK BY APIECE OF ROCK MEASURING APP. 5'X21/2'X1"THICK.ROCK WAS LOCATED IN FEEDER INTERSECTION OF 001 SECTION AND FELL FROM BETWEEN BOLTS.

EMPLOYEE WAS WO9KING ON SECTION HEADDRIVE STARTING BOX WHEN HE SLIPPED & STRUCK HIS KNEE ON FRAME OF STARTING BOX WHILE TURNING TO GET A SCR EWDRIVER

EMPLOYEE WAS US3NG A SHOVEL WITH AN 8 FT HANDLE TO CLEAN THE BELT TAILPIECE. EMPLOYEE THEN TRIED TO LIFT THE HEAVY LOAD WITHOUT GETTING CLOSE TO THE LOAD THUS RESULTING IN A LOWER BACK INJURY.

EMPLOYEE WAS RE4OVING A PIECE OF ROCK FROM TOP OF BRIDGE DOLLY WHEN HIS RIGHT THUMB WAS CUT BY THE SHARP-EDGED ROCK.

EMPLOYEE WAS HE5PING PLACE A DERAILED MANTRIP CAR BACK ON THE TRACK WHEN HIS LEFT FOOT WAS CAUGHT BENEATH THE CAR.

001 SECTION EXP9RIENCED AN UNINTENTIONAL ROOF FALL IN THE #4 ENTRY EXTENDING APPROXIMATELY 20' INTO THE LAST CROSSCUT BETWEEN #4 AND #3 ENTRY. FALL MEASURED APPROXIMATELY 50' LONG 43'ACROSS AN D 7 TO 8 FEET H3GH.

AN UNINTENTINAL3FALL OF ROOF OCCURRED ON 003 SECTION BELT LINE MEASURING APPROX. 75 FEET LONG BY 20 FEET WIDE, AND 7 FEET HIGH. FALL OCCURRED APPROX. 120 FEET OUTBY SPAD #8474.

EMPLOYEE WAS RE1LACING A U JOINT IN A MODEL 74 S&S SCOOP WHEN HE EMPLOYEE NEEDED TO MOVE THE SCOOP TO FACILITATE THE INSTALLATION OF THE FOURTH BOLT. SCOOP OPERATOR, I NAME THEN ENERGIZED THE SCOOP AND WHEN3ENERGIZED THE SCOOP TRAMED IN REVERSE DRAGGING THE INJURED APPROX. 5 STRIKMING THE COAL RIB SQUEEZING HIM BETWEEN THE SCOOP DECK AND RIB.

EMPLOYEE WAS HE5PING LIFT DERALED MANTRIP CAR BACK ON TRACK WHEN HIS FOOT WAS CAUGHT UNDER THE CAR.

EMPLOYEE WAS PU5LING THE VISIBLE DISCONNECTS ON SECTION POWER CENTER WHEN HIS SHOULDER STARTED HURTING. THE REPORT WAS LATE BECAUSE EMPLOYEE'S INJURY WAS STILL UNDER INVESTIGATION.

EMPLOYEE WAS HE5PING REMOVE ON AUGER MOTOR WHEN A PIECE OF ROCK FELL MEASURING 1FT.SQUARE BY 4"THICK TAPERED TO 1/8",CUTTING EMPLOYEE'S RIGHT MIDDLE FINGER.

EMPLOYEE CUT HI8 MIDDLE FINGER WHILE UNCOUPLING A SUPPLY CAR FROM THE LOCOMOTIVE.CUT RESULTED FROM THE SUPPLY CAR ROLLING AGAINST THE LOCOMOTIVE AFTER BEING UNCOUPLED.

EMPLOYEE WAS AS8ISTING ROOF BOLTING OPERATIONS IN A FALL AREA WHERE EXTENDED ROOF BOLT DRILL STEEL WAS BEING USED.FIVE SECTIONS WERE BEING USED AND EMPLOYEE WAS HOLDING STEEL STEADY WHEN HIS F INGER WAS CAUGH7 BETWEEN TWO PIECES OF STEEL TWISTING AND BREAKING HIS LEFT LITTLE FINGER.

AN UNINTENTIONA5 ROOF FALL OCCURRED ON 003 SECTION COVERING THE 15CM JOY MINER & POSSIBLY COVERING THE 300 GALIS ROOF BOLTER. THE FALL MEASURED 90' FROM THE X-CUT BETWEEN #1 & #2 ENTRY EXTEND ING TO & INCLUD3NG THE #3 ENTRY INTERSECTION. THE WIDTH OF THE FALL WAS APP 20' & EXTENDING INBY THE #3 INTERSECTION FOR APP 12' ADDITINAL. THE HEIGHT WAS APP 6'.

EE WAS ROLLING 2UT 100' SECTION OF BELTLINE 36" WIDE WHEN HIS BACK STARTED HURTING HIM. THE DIAGNOSIS WAS A BACK STRAIN.

EMPLOYEE BENT A3RESIN BOLT 48IN LONG FOR INSTALLATION PURPOSES AFTER INSTALLING BOLT HALFWAY INTO HOLE EMPLOYEE PROCEEDED TO STRAIGHTEN THE BOLT FOR FULL INSERTION INTO THE HOLE WHEN THE BOLT SHIFTED TO THE 8IDE CAUSING THE EMPLOYERS WRIST TO TWIST & BREAK HIS WRIST

EMPLOYEE WAS ST9UCK BY A PIECE OF DRAW ROCK APPROX. 1'X6"X2" CAUSING LACERATIONS TO HIS LEFT ARM WHILE OPERATING A SHUTTLE CAR.

EE WAS OPERATIN1 LOCOMOTIVE WHEN A SMALL ROCK 6"X4"X1/4"STRUCK EES RIGHT FOREHEAD THUS CAUSING THE EE TO S TRIKE THE LOCOMOTIVE FRAME. SUTURES WERE REQUIRED FOR BOTH LACERATIONS.

EMP HIT HIS LEF7 KNEE ON A BELT STAND WHILE HELPING MAKE A BELT SETUP THIS ACCIDENT REPORT IS SUBMITTED UNDER PROTEST THE OPERATOR HAS NOT CONFIRMED THE ALLEDGED INJURY OCCURRED ON THE JOB

EMP ALLEGES THA7 HE BRUISED HIS KNEE WHILE PULLING MINER CABLE THE OPERATOR HAS NOT CONFIRMED THAT INJURY OCCURRED ON THE JOB

100 SECTION HAS3EXPERIENCE A ROOF FAILURE ON THE SECTION CROSS BELT APP.25 BREADS FROM CROSSBELT HEADDRIVE.THE FALL WAS APPRO. 25"X20"X3 1/2".

EMPLOYEE WAS CA9RYING ROCK DIST WHEN HE STUMPLED AND BRIKE HIS FOOT.

EMPLOYEE HIT HIS SHOULDER AGAINST FRAME OF HEADDRIVE

EMPLOYEE HAND WAS CAUGHT BETWEEN THE SCOOP BUCKET AND THE FRAME.

AN UNINTENTIONL FALL OF ROOF OCCURED IN THE #3 ENTRY. THE FALL WAS APPROX. 90 FEET LONG AND 8-10 FEET HIGH AND 20 FEET WIDE. THE SURROUNDING ROOF WAS CRIBBED AND THE EQUIPMENT WAS REMOVED FRO M THE SECTION. MSHA OFFICIALS WERE PRESENT AND ACCOMPANIED THE INVESTIGATORS.

EMPL CHECKING VOLTAGE ON CM WHEN METER BLEW UP BURNING EMPL ARM.

EMPLOYEE WAS ADJUSTING CLUTCH AND TOOL HE WAS USING SLIPPED AND CUT HIS HAND REQUIRED 4 STITCHES

EE WAS ADJUSTING TAILROLLER & JACK SLIPPED STRIKING EE IN THE JAW.

EMP WAS CHANGING THE CLUTCH ON THE MINER WHEN THE CLUTCH SLIPPED AND FELL ON HIS THUMB