Mining Incidents

Boonsboro Quarry Metal/Non-Metal

Boonsboro, Washington Condado, MD  ·  Activa
ID de mina MSHA: 1800024

Seguir esta mina

Avísenme cuando se presente un nuevo incidente de la MSHA en Boonsboro Quarry.

Muertes
0
Incidentes totales
11
Años en registro
2000–2024
Último incidente
Aug 2024
Historial de cumplimiento
Citaciones de MSHA desde 2000
73
citaciones
8
significativas y sustanciales
$8,734
multas propuestas
$7,627
pagado a la fecha
Fuente: datos de violaciones de MSHA, actualizados semanalmente.
Tasas de seguridad trimestrales
Citaciones por millón de horas trabajadas, según lo reportado a MSHA
Trimestre Horas trabajadas Citaciones S&S Por 1M hrs
2025 Q4 3,825 1 0 261.4
2025 Q3 1,805 0 0 0.0
2025 Q2 1,375 0 0 0.0
2025 Q1 3,149 0 0 0.0
2024 Q4 2,174 0 0 0.0
2024 Q2 2,791 0 0 0.0
2024 Q1 1,516 0 0 0.0
2023 Q4 3,134 0 0 0.0
Los trimestres con menos de 100,000 horas reportadas aparecen atenuados: muy pocas horas para una tasa estable.
No se registran muertes en esta mina.

Incidentes reportables

11 en archivo

2024 · 1 incidente

15 de agosto de 2024 MD · Metal/No metálico Controlador de terreno OTRO
Martin Marietta Materials, Inc · Reacción corporal, no clasificada en otra parte

While performing cleanup duties, the employee turned body to take a step and dislocated left knee.

2023 · 1 incidente

15 de junio de 2023 MD · Metal/No metálico Operador de perforadora RESBALÓN O CAÍDA DE PERSONA
Martin Marietta Materials, Inc · Caída a la pasarela o superficie de trabajo

The employee was connecting a water hose to the drill to fill with water. Once connected, EE turned back and tripped over the hose that was laying on the ground causing EE to fall and dislocate left middle and index fingers.

2017 · 1 incidente

12 de enero de 2017 MD · Metal/No metálico Soldador (fuera de taller) MANEJO DE MATERIALES
Martin Marietta Materials, Inc · Atrapado en, bajo o entre, no clasificado en otra parte

An employee was installing pipe supports for a grizzly. The supports consisted of 8" schedule 160 steel 52" long. As employee was installing a support, they pinched their hand between the wall of a the crusher and pipe support causing a laceration require 12 sutures to close the wound.

2011 · 1 incidente

20 de junio de 2011 MD · Metal/No metálico Conductor de camión de acarreo/fuera de carretera/carbón/mineral/mina/cantera/roca/llanta neumática, Conductor de camión de transporte MANEJO DE MATERIALES
Martin Marietta Materials, Inc · Sobreesfuerzo al jalar o empujar objetos

Trying to lift hood on Mack truck and it caught and employee pulled second time and something popped in shoulder. R. shoulder/cervical strain plan - alternate ice & heat to area, take Naproxen (he already has a prescription) Robavin 750 mg & Ultram 50 mg. Follow up in one week - use sling provided - no use of R. arm.

2009 · 1 incidente

18 de marzo de 2009 MD · Metal/No metálico Almacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavado RESBALÓN O CAÍDA DE PERSONA
Martin Marietta Materials, Inc · Caída sobre o contra objetos

EE was opening another EE's shoot for dust release, the other EE backed up too far and hit the clam gate on bottom of hopper & impact of clam knocked lever out of EE's hand and knocked him against beam to the ground, causing laceration to EE's left arm.

2006 · 1 incidente

9 de agosto de 2006 MD · Metal/No metálico Conductor de camión de acarreo/fuera de carretera/carbón/mineral/mina/cantera/roca/llanta neumática, Conductor de camión de transporte MAQUINARIA
Martin Marietta Materials, Inc · Golpeado por... no clasificado en otra parte

The employee was greasing an R-35 Euclid haul truck with power greaser. Attempted to grease a fitting on the truck when the grease line busted on end of greaser, causing the grease to enter his left hand pinky finger.

2004 · 1 incidente

10 de junio de 2004 MD · Metal/No metálico Almacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavado HERRAMIENTAS MANUALES (SIN MOTOR)
Martin Marietta Aggregates · Golpeado por... no clasificado en otra parte

Employee was pounding anvils out of anvil ring with a sledge hammer. Another employee was standing about 25 feet away. While pounding the anvil a piece of metal from sledge hammer, head came off and hit the second employee in the upper left thigh.

2003 · 1 incidente

11 de marzo de 2003 MD · Metal/No metálico Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo HERRAMIENTAS MANUALES (SIN MOTOR)
Martin Marietta Aggregates · Caída a la pasarela o superficie de trabajo

EE WAS STANDING ON THE GROUND PULLING ON A 14" PIPE WRENCH WITH A 24" PIPE HANDLE. WRENCH SLIPPED FROM DOUBLE NUTS ON A STUD AND THE EE FELL ON HIS REAR END ON THE GROUND WITH HIS RIGHT FOOT U NDER HIM.

2000 · 3 incidentes

29 de agosto de 2000 MD · Metal/No metálico Ayudante de perforación RESBALÓN O CAÍDA DE PERSONA
Martin Marietta Aggregates · Sobreesfuerzo, no clasificado en otra parte

EMPLOYEE WAS DISMOUNTING THE TRAM CAB OF INGERSOLL T-4 DRILL; HE SLIPPED ON THE FOOTSTEP AND STRAINED DIGITS OF THE RIGHT HAND THAT WAS HOLDING TO THE GRID IRON.

18 de agosto de 2000 MD · Metal/No metálico Gerente de mina, Capataz de mina, Propietario de mina MANEJO DE MATERIALES
Martin Marietta Aggregates · Sobreesfuerzo al levantar objetos

EMPLOYEE WAS MOVING A 55 GAL OF OIL WHEN HE STOOD THE BARREL UP HE FELT PAIN IN THE GROIN.

3 de enero de 2000 MD · Metal/No metálico Almacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavado MANEJO DE MATERIALES
Martin Marietta Aggregates · Atrapado en, bajo o entre, no clasificado en otra parte

EE DROPPED A BAR USED TO HOLD OPEN AN INSPECTION DOOR OF #2 HAMMER MILL AND MASHED THE 3RD DIGIT OF HIS LEFT HAD. HE SUSTAINED A CONTUSION UNDER THE FINGERNAIL. EE WAS TAKEN TO DR. WHO DRAINED THE BLOOD FROM UNDER THE FINGERNAIL.