Mining Incidents

PENROSE QUARRY Metal/Non-Metal

Controlada por Vulcan Materials Company
Penrose, Transylvania Condado, NC  ·  Activa
ID de mina MSHA: 3100111

Seguir esta mina

Avísenme cuando se presente un nuevo incidente de la MSHA en PENROSE QUARRY.

Muertes
0
Incidentes totales
8
Años en registro
2001–2022
Último incidente
Jul 2022
Historial de cumplimiento
Citaciones de MSHA desde 2000
52
citaciones
8
significativas y sustanciales
$4,175
multas propuestas
$4,175
pagado a la fecha
Fuente: datos de violaciones de MSHA, actualizados semanalmente.
Tasas de seguridad trimestrales
Citaciones por millón de horas trabajadas, según lo reportado a MSHA
Trimestre Horas trabajadas Citaciones S&S Por 1M hrs
2025 Q4 6,468 0 0 0.0
2025 Q3 4,827 0 0 0.0
2025 Q2 5,503 0 0 0.0
2024 Q4 2,345 0 0 0.0
2024 Q2 2,502 0 0 0.0
2024 Q1 4,749 0 0 0.0
2023 Q4 1,115 0 0 0.0
2023 Q3 3,266 0 0 0.0
Los trimestres con menos de 100,000 horas reportadas aparecen atenuados: muy pocas horas para una tasa estable.
No se registran muertes en esta mina.

Incidentes reportables

8 en archivo

2022 · 1 incidente

27 de julio de 2022 NC · Metal/No metálico Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador MANEJO DE MATERIALES
Vulcan Construction Materials, LLC · Sobreesfuerzo al jalar o empujar objetos

Employee was assisting with maintenance on a conveyor head pulley. While on the ground employee lifted it to roll it over and heard a pop in elbow when employee pushed the pulley forward. Muscle swollen up in forearm

2017 · 1 incidente

24 de abril de 2017 NC · Metal/No metálico Capataz de planta de preparación, Supervisor, Supervisor de planta de molienda, Supervisor de horno MANEJO DE MATERIALES
Vulcan Construction Materials, LLC · Atrapado en, bajo o entre un objeto en movimiento y uno fijo

Employee right thumb was smashed between hydraulic cylinder and pushing wedge. Resulting in a crush thumb.

2007 · 2 incidentes

4 de agosto de 2007 NC · Metal/No metálico Capataz de bandas, Capataz de mantenimiento, Supervisor de mantenimiento HERRAMIENTAS MANUALES (SIN MOTOR)
Vulcan Construction Materials, LLC · Caída a la pasarela o superficie de trabajo

Employee was using a wrench attempting to break a bolt loose with body in full tension and body in prone position approx. 6-8 inches off the ground. When the bolt broke loose, he struck the ground, buttocks first, but sustained no apparent injury. He awoke the next morning with severe muscle spasm in lower back.

22 de junio de 2007 NC · Metal/No metálico Obrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de mina MAQUINARIA
Vulcan Construction Materials, LLC · Golpeado por... no clasificado en otra parte

Employee was using a chainsaw to clear/fell trees. Tree kicked chainsaw back between legs resulting in a laceration of leg requiring sutures. Employee returned to duty without restrictions.

2005 · 3 incidentes

11 de agosto de 2005 NC · Metal/No metálico Conductor de camión de acarreo/fuera de carretera/carbón/mineral/mina/cantera/roca/llanta neumática, Conductor de camión de transporte HERRAMIENTAS MANUALES (SIN MOTOR)
Macon Construction Inc · Atrapado en, bajo o entre un objeto en movimiento y uno fijo

Employee was swinging an 18 lb sledge hammer to tap a wrench to loosen a nut on the tension rod of a Hewitt Robbins jaw crusher. The tip of his left index finger was smashed between the hammer handle and a piece of steel. He was wearing work gloves & safety glasses. He was taken to the emergency room where he received 8 stitches.

18 de abril de 2005 NC · Metal/No metálico Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador HERRAMIENTAS MANUALES (SIN MOTOR)
Macon Construction Inc · Golpeado por... no clasificado en otra parte

EE WAS WIDENING A HOLE IN A PLASTIC COLLAR WHENT THE POCKET KNIFE SLIPPED AND CUT LEFT INDEX FINGER AT THE MIDDLE KNUCKLE, RECIEVED 6 STITCHES

7 de febrero de 2005 NC · Metal/No metálico Conductor de camión de acarreo/fuera de carretera/carbón/mineral/mina/cantera/roca/llanta neumática, Conductor de camión de transporte RESBALÓN O CAÍDA DE PERSONA
Macon Construction Inc · Caída desde una máquina

Employee was descending the ladder steps of the R25. His right hand was holding the pole to the rearview mirror/handrail as he stepped down with his left foot. His left foot slipped off the top rung and he fell to the ground. On the ground, he looked at his left shin and saw a puncture wound about 1" long by 1" deep. He received 5 stitches.

2001 · 1 incidente

14 de agosto de 2001 NC · Metal/No metálico Operador de pala de carbón/mineral, Paleador, Operador de pala mecánica TRANSPORTE MOTORIZADO
Macon Construction Inc · Atrapado en, bajo o entre, no clasificado en otra parte

EE PLACED HAND AT THE BASE OF THE STEPS ON A WEIGHTED TAKEUP. THE FORKLIFT OPERATOR LOWERED THE WEIGHT CAUSING THE SLIDE TUBES TO COME DOWN AND SEVER THE END OF HIS FINGER.