Avísenme cuando se presente un nuevo incidente de la MSHA en Dell Rapids West Quarry.
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2025 Q4 | 10,839 | 1 | 0 | 92.3 |
| 2025 Q3 | 13,929 | 0 | 0 | 0.0 |
| 2025 Q2 | 12,311 | 0 | 0 | 0.0 |
| 2025 Q1 | 5,653 | 0 | 0 | 0.0 |
| 2024 Q4 | 8,876 | 1 | 0 | 112.7 |
| 2024 Q3 | 11,484 | 0 | 0 | 0.0 |
| 2024 Q2 | 11,932 | 1 | 0 | 83.8 |
| 2024 Q1 | 12,258 | 0 | 0 | 0.0 |
Employees were trying to lower the gates inside the rolling rock box. To lower the gate, 15 bolts needed to be removed. When the last bolt was removed, the gate slipped and landed on the foot of one of the employees.
Employee was conducting maintenance activities and was using a wrench and felt a pop in left wrist. Was seen at Occupational Medical Center where they were given a brace for their wrist.
Laborer while cutting out new skirting material out of old belting, their grip slipped causing laceration of left hand while using a box cutter.
The employee was tightening the nut on the head section of the 7'standard crusher. A suspended weight and flat bar were being used to conduct final tightening. The employee was on the other side of the head and they did not realize the tip of finger was in one of the bolt holes on the bar. When the bar was struck, the bolts broke and the bar shifted cutting the tip of the finger.
An employee was assisting in re-welding a section of the mainframe liner, during the process, employee was exposed to arc-flash.
Standing under crusher trying to remove the saddle and felt a pop in EE's shoulder.
Employee was cutting worn belting for skirts with a utility knife. Employee removed their left glove on the last cut. Employee slipped with the knife and cut a finger.
EE was standing behind the employee trying to remove a worn tooth on the loader bucket. A small piece of the tooth came off hitting EE in the left cheek area below the safety glasses.
While pounding on tooth of loader bucket with a hammer, a small 1/4" piece of the hammer chipped off and lodged in left upper thigh.
Performing routine maintenance and got piece of foreign matter in left eye.
Employee was loosening jaw die bolts using 1" impact, slipped and lost control of impact causing him to twist his body injuring his knee.
Removing screen from the truck bed and the weight of the screen pinched finger against the truck bed.
Cramping of arms and legs due to dehydration.
Employee was trying to catch some falling pieces of metal and tripped on a piece of metal on the ground and fell backwards.
Employee was running the 330 around the powerlines. He got out to see how close they were and slipped on some loose rock/dirt.
Slipped on packed snow and twisted knee.
Employee was clearing a stuck rock from the jaw crusher using a manual hand crank and the crank handle his index finger on his hand.
THE WIND ALLEGEDLY BLEW FOREIGN MATERIAL INTO EE'S RIGHT EYE.
EE WAS CLIMBING THE LADDER TO THE HAUL PAK TRUCK WHEN HE SLIPPED AND FELL TO THE GROUND, BUMPING HIS KNEE ON THE LADDER.